The MT200 does not have a separate port. It does like a 7018. It's not bad with a 6011. I also tried today same process on 6 inch sch 40. 3/32 gap 3/32 land 35.5 bevel. I turned machine to roughly 70 still not fun to start but once started it ran pretty well except for the finicky arc length. I have...

Hello I'm having trouble with a root pass on 2" sch 40 black pipe. I'm using my MT200 ac/dc tig with with stick. I'm also using 3/32 inweld 6010 rods. I have roughly 1/8 bevel and 1/16 land with about 1/16 gap. I have ran the machine all the way down to 45 amps. It seems to run fine with string...

Hello. Been in the fab business for about 20 years. Looking for some ideas to better myself in the welding department

Question today. Has anyine used a CK MT 200 ac/dc tig machine for stick welding. So far its a pretty good tig machine. It welds great in tig mode. Was wondering if anybody else has ever tried this machine with a stick. Reason being may take it on some jobs that reguires 6010 root pass. I havent trie...