Great job!

Sent from my Pixel XL using Tapatalk

Cool stuff! Great job!

Looks awesome!

Sent from my Nexus 6 using Tapatalk

Looks like it works great!

Sent from my Nexus 6 using Tapatalk

Great work! Thanks for the post.

A coupon I ran at home to test out settings https://uploads.tapatalk-cdn.com/20170218/db3e362862defb8380522c77dad1bc7c.jpg A piece from work yesterday https://uploads.tapatalk-cdn.com/20170218/ce3febf5e11006a46721683f5ee4b255.jpg Sent from my SM-G920V using Tapatalk Looks perfect! Sent from my Nexu...

homeboy wrote:Actually I have quite a few projects with misc. holes and slots from reclaimed angle iron bed frames from the metal recycle pile at the landfill. If anyone asks what they're for just say -well isn't it obvious and change the subject.

Really lol! I'm going to use that one.

Nice cart -lot of work but always worth it in the end. Had me going for a bit about why all the holes in the 1in tubes and then I went back and read your post and all was explained. :? Yeah in retrospect, I should have just bought new steel. Nothing wrong with re-purposing stuff. I do it all the ti...

homeboy wrote:Nice cart -lot of work but always worth it in the end. Had me going for a bit about why all the holes in the 1in tubes and then I went back and read your post and all was explained.

Yeah in retrospect, I should have just bought new steel.

Built a welding cart in the ZT Fab style with a 12 gauge sheet 2'x4', left over 18 gauge 1" square tubing from a store display, and various lengths of 2", 3", and 4" .125 flat bar. I wanted the cart to hold two or more welders and two tanks. I found a barely used Lincoln 210mp on...

I like it. Looks scary, like it's on fire without a fire.

Nice job! Panels galore!

I always grind and plasma cut outside to keep the dust and fumes out if the garage. Problem is it sucks in the winter so i decided to try and build a downdraft table. I had most of the metal needed except for the .080" aluminum for the sides and some small angle......that i got from work. I us...

Great information! Thanks for detailed explanation.

Looks great!

That's awesome!

I finished this little stand a couple weeks ago. Prior to this stand I was simply clamping it down to a HF portable workmate knockoff. The stand worked ok until I figured out I might end up accidentally dropping the saw someday. I looked at all or most of the other designs available commercially and...

Thank you all for your encouraging comments!

How much downdraft do you get? I don't know how to measure the actual pull at the top of the table. I did do what Jody did in his Youtube video with lighting a paper towel placed at the top of the table. To my delight, all the smoke and fumes were pulled down but as the paper burned and drifted dow...

Wow, nice table, clamps, and arm rest! Very inspirational design and build.

Thanks! If I could change one thing, I would use thicker wall tubing or angle iron for the top frame.

I recently finished a version of Jody's downdraft table design. Works great for plasma cutting and even capturing flux-cored welding smoke. I don't have a fume extractor so I used Jody's suggestion with a cheap fan and duct from HF. I'm learning how to weld so my joints look like "Fido's you kn...

Thank you! Happy to be here!

So grateful for Jody's Youtube channel, I figured joining this forum makes sense. I'm just learning how to weld in my spare time. I just finished building Jody's downdraft table. For better or worse, most of my personal metal projects start with using whatever scrap metal I have on hand. Nice to &qu...