tough skin you wont hurt my feelings ;) the clamp goes to A and then it looks like it comes out where B is and finishes at C THe curved metal bar at the far back right in the picture has no wire to it and the closest wire is -G which comes from F the box at the bottom I live in Sweden so don't think...

Hi still need a little help on this so in the picture i have added letters A is fron the earth clamp B is where iasume the earth clamp comes out Cis where the earth ends up D is the live from the torch ( i hope) E is where the live go to Hope i am correct so far F is a second live ( i presume becaus...

thanks Dave aka "RTFM" Ive seen this video before, on mine it is easy to locate the earth (clamp cable) and follow it , but the positive lead from the gun is not so easy, there are two small wires red and black which come from the gun to the spool tensioner which feeds the wire other than ...

]Hi Noddybrian Thanks for the quick reply, I have pictures but don't know if you can upload to this forum I could mail direct to you if that helps? when i look in the machine you can follow the earth clamp easily as it is thick, but the cable to the gun is difficult as all i can see is two thin wire...

Hi all I need some help to switch the polarity on my old mig welder, it is a sealy 200/1 mig and i want to convert it to gasless (flux wire) but there are no plus and minus points to swap around on this model so i need to retro fit some but dont know with wires to switch,i have some images but dont ...