You may want to rethink that filler choice, your setting your self up for failures. http://www.harrisproductsgroup.com/~/media/Files/PDF/Welding%20Parameters%20and%20Selection%20Charts/StainlessSelection.pdf Edit And watch your preheat http://www.tempil.com/assets/1/31/welding_preheat_chart.pdf Edi...

https://youtu.be/0TqvEXS3f88 and another Again, many thanks for your information. I'ts been very helpful. One question sir, i weld SS 410 as base material with SS 304 wire rod on the shaft. Its required to heat treatment after welding to reduce hardness in HAZ area to get more ductility of shaft ??...

Do not weld all one side then turn the shaft Just start your weld bed then turn shaft weld like a screw by 1/4 turn Some worn shafts more than one bed Add extra thick this will help keep shaft straight and a good finish Do not try filling after machining Do not try welding in lathe it turns to fast ...

weldin mike 27 wrote:Do you need to build up a section of the shaft so it can be machined back to the original size? Or is it broken?

Maybe we need build up the shaft by welding and then machining to original dimensional. do you any suggestions what the standard or other refference sir.

Thanks, regards
Achmad

Hello all of expert welding.

i had some problem in exciter shaft DC motor, i need to welding shaft. the defect of will be weld in shaft tip.
maybe all expert any sugesstion how to welding procedure

Thanks, Regards
Achmad

Hard to be exact what the effect will be, but the biggest difference between C-263 and Inconel 625 seems to be that the Inconel 625 is much lower in cobalt content (only around 1% in inconel, but around 20% in C-263) So any weld and surrounding area will likely have a reduced cobalt percentage comp...

Hy guys, iam Achmad Arifudin H. From indonesia I have a business on industrial gas turbine. Could you help me, how to selecting the right welding rod of TIG. I ever welding the base material Nimonic C-263 with Inconel 625 wire rod. It cause the project is urgent and need to fast repair, and our work...