Be aware that E71T11 has some properties that can be undesirable in some cases. 1) There is a limitation to the deposited weld metal thickness that can be welded. This is due to the chemical elements in the weld metal building up during multiple pass welds. 2) The weld metal is not easily welded ove...

ASME SEC VIII is the code in the US for pressure vessels. For vessels that are in service and requiring repair, the National Board Inspection Code (NBIC) has rules for testing. Pressure testing is usually performed at 1.3 times the design pressure but options exist for other methods. Welded Repairs ...

I have shared this on a few other locations but thought it may be of interest to some here.
http://weldingclassroom.com/learning/th ... ied-welder

WHat you ask about will be addressed at https://www.youtube.com/watch?v=1QxT7JUjs94.

You did a good job not undercutting as you welded. The bead profile can be flattened out with a slight side to side motion. the side to side is very small, fast, and with a brief pause on each side. This will allow the base metal to remove some of the heat from the molten puddle which in turn cools ...

Iuka Mississippi. Registered today. Welder, teach a little, CWI, love the trade. Its been VERY good to me.

Gerald