I don't know if they are still down there, but the large instruments were built by the shop that I work for back in the day.

Sent from my VS995 using Tapatalk

Thanks for the info. I just piced up a #8 cup to try. I will order a gas lens kit soon as my budget allows. For now I will go through what you posted and will get back to you when I`m done. My machine is all manual, so I am the pre flow and post flow control. My Tungsten stays clean, I guess I eith...

Not bad BigD. We were going to to get some titanium donated to the school by a local business but we still don't have a 300 amp torch and we were concerned about ventilation. So: How many amps did you use? Did you feel sick afterwards breathing it in? Why would you need a 300a torch? Most people we...

https://uploads.tapatalk-cdn.com/20170113/bea378636d79287726647b481d245ca3.jpg https://uploads.tapatalk-cdn.com/20170113/cd9a594825f16a0c06f191de855c5557.jpg Just f :o cking around at work. I'm pretty sure the brackets in the first picture are carbon, but not 100% (not that it matters, parts I pull...

buying some pop or beer. pop? are you from the north? :) It's pop. Get over it, like meow! It's also said creek (with a long E sound), and it's correctly spelled washed (and pronounced like that) while we're on the subject of colloquial misnomers and bad pronunciation! Sent from my VS995 using Tapa...

No, There's no "horse-riding" going on here from anywhere, Oscar. It's just an expressed and related opinion derived from the Austrian Economic School (which is not a building), and not a cause for whining or demandingness. Or, have you appointing yourself as a moderator here? Or, are you...

The only time I intentionally seek the approval of another welder is when he is teaching me something. A little time on facebook welding forums will show you how selfish people can be. I had the opportunity to take close-up photographs of welds on an engine removed from the space shuttle Atlantis (...

But, for the rest of us, dig this gal, no BALLS aside, rockin' a 251Si unit on aluminum with a 200 amp spoolgun. I mean, either she or the machine, or maybe it's the two of them togather that get me a little excited! Ha, ha, ha... 0ZBBQAQ6V8A Did you see which helmet she was using. Jody uses it a l...

I'm looking for hood that isn't quite as annoying. I'm using a Lincoln 3350, which is great, except when the pipe fitters leave the forklift running behind me for extended periods of time. Other guys say they have the same problem, so It seems it is common for any hood using optical sensors...so I ...

This what I get paid for half a day of work normally when I have the shop fully staffed and am not supposed to be welding. I set a machine for someone and ask them to articulate what they do and do not like about the way that it welds and adjust accordingly, while trying to impress upon them the imp...

BigD wrote:

GreinTime wrote:With an M62?

Sent from my VS995 using Tapatalk

Turbo S52, by one I meant E30

That's what I figured lol. I want to do an S62 car, but don't want to pay for one. We did a Z3 Mcoupe S62 at a shop I worked at in Ohio, and it was a rowdy unit.

Sent from my VS995 using Tapatalk

With an M62?

Sent from my VS995 using Tapatalk
@bigD

Looks like a BMW driveshaft if I've ever seen one Sent from my VS995 using Tapatalk Affirmative! E36 6cyl driveshaft I'm just about finished with an exhaust for an E30 a friend put an M62TuB44 in. If you check out @greintime3592 on Instagram, I have some videos up there of it. I just got a replacem...

Pic of the shortened driveshaft after it came back from balancing. My first time doing this, friend of mine was swapping in a 6 speed which is much longer than his 5 but the flange is the same. Needed to take 5" out of it, the seam is in the bottom third in the pic. Somehow managed to do it wi...

Sorry about the delay in the review, I'm awful at following up when I say things like that! After welding with it all week, I can honestly say that the clarity is amazing. The head gear is one of my new favorites, so its comfortable to wear all day. One kid said "Man, that's as clear as my 9200...

Initial conclusions after the few beads I ran on an exhaust: I actually have no idea what my hands are doing as I can now see what is and isn't happening lol. I'll be headed into work for 11, so will post a more thorough report once I get a full shift of work in. The clarity is awesome though, as is...

I just unwrapped mine today, will post conclusions vs a SavePhace M03 tomorrow

Sent from my VS995 using Tapatalk

It's a SSC style pedal part number if it makes you guys feel any better

Sent from my VS995 using Tapatalk

The Miller equivalent of the SuperFlex hoses are actually pretty nice.

Sent from my VS995 using Tapatalk

Just don't get "Slag Daddy" embroidered on there

Sent from my VS995 using Tapatalk

I forgot to take a picture. Sorry about that!

Sent from my VS995 using Tapatalk

I can take a picture of one in a little bit here when I go back in from lunch.

Sent from my VS995 using Tapatalk

You haven't mentioned if you are using an air-cooled tig torch or a water-cooled tig torch. Both are available in 25-ft lengths. Have you pulled the handle off your current tig torch to see/measure what kind of fitting it has? Wp280 out of the box on a Dynasty should have a collar lock on the AR li...

Also, Ar/He mix will make your dynasty 200 weld like a whole different animal even on thin aluminum. Probably not worth the added expense, but at work, where we have bosses that pay for gas, we use helium on anything over 1/4" even with a Dynasty 350, as it makes consumable life go up because y...

Actually, quite the opposite is true. You'll have much higher penetration with lower amps with DCEN and 100%He than you will with any manner of AR/He mix at a given amperage. You don't experience near the amount of warpage, as the overall heat input is lessened dramatically. The parts have to be su...