We are typically using black stallion 750 for our mig welding right now at work. I hate these gloves. The fit on them is super inconsistent one large pair will fit great the next will be way to small. They also don't last that long before the lining in them starts to fall out in clumps. I am looking...

Sold


Sent from my iPhone using Tapatalk

Otto Nobedder wrote:Seems quiet.

I've been catching up a bit and enjoying every episode.

I'm surprised there are not more comments here.

Steve S

Started listening to Steve's episode today. Definitely some interesting stuff.


Sent from my iPhone using Tapatalk

According to cyber weld it's a dinse plug. http://store.cyberweld.com/tigtopoadsod1.html


Sent from my iPhone using Tapatalk

RamboBaby wrote:I didn't realize that either Miller or Lincoln used dinse connectors. When did they start?

What would you call it? I believe that everyone calls it a dinse plug.


Sent from my iPhone using Tapatalk

Bump


Sent from my iPhone using Tapatalk

Can't say what there for but helping put these together. All 3/4" plate. They be about 12' long.




Sent from my iPhone using Tapatalk

Looks kinda similar to the Thomas saw we have at work. Getting blades for that ones a pain because the hole pattern is obsolete now a days.


Sent from my iPhone using Tapatalk

You need the twist mate connection for thru gas dinse plug google k1622-4. The one from USAweld is quite nice and then you will also want an 20 series torch of your choosing. You will have to cut the connection off the gas hose and install it on your dinse plug. Other wise usaweld as ready to run 20...

I gave 1300 for my precision tig 225. So maybe 1,000


Sent from my iPhone using Tapatalk

Came off a speedway sw-320 torch that I bought. Looks to be in great shape. I personally have not used it since I needed the Lincoln adapter. 25 plus shipping and PayPal fees http://uploads.tapatalk-cdn.com/20160826/0495c4169d6b0ddeead29840b08a4581.jpg http://uploads.tapatalk-cdn.com/20160826/1baf47...

Man i want this.


Sent from my iPhone using Tapatalk

I'm using a ThermalArc air cooled setup. Recently, while welding with my WP9 torch every weld went to CRAPOLA! The puddles boiled and when they cooled were porous, with BIG voids. VERY UGLY. I had gas and good flow. But I had just gotten a new bottle or argon, so I suspected the gas might have been...

The Stick out of dual shield also take a bit of time to get used to. That wire needs to preheat before hitting the puddle. These are 3G bend tests on 1/2 plate with a 1/4" backing bar. http://uploads.tapatalk-cdn.com/20160731/b07e967452b03721d28ec57b2c39bae7.png Sent from my iPhone using Tapatalk

That's all we used at school were inverter stick welders. Lincoln c300 and our miller dynasty 280's


Sent from my iPhone using Tapatalk

5" and 7" 3m cubitron 36 grit fiber disks are all we use at work and they rock. Way better than using flap wheels.




Sent from my iPhone using Tapatalk

5" and 7" 3m cubitron 36 grit fiber disks are all we use at work and they rock. Way better than using flap wheels.


Sent from my iPhone using Tapatalk

selling my tig welder. It is a good unit and I am only selling it to buy something a little different. Come with a both a 17 and a 9 series torch. Both flex heads. Unit is testable. Ready to run machine. I have an extra tank I might also get rid of. Ready to run machine. Come and test her out. 2,000...

We bought a 17 from them for our sycrowave 180. After a few months we started have issues with hard arc starts. Went to a CK torch head on the same cable and haven't had any issues since.


Sent from my iPhone using Tapatalk

I highly doubt that your prop is brass. MOST likely it is bronze or what Mike said what is commonly referred to as "Nibral" (nickel/bronze/aluminum). It's not just used for big ship screws that he probably is referring to but small stuff as well (sail boats/ski boats/sport fishing, etc. N...

You could trying turning arc force up to help push more metal through. That works well for me to help keep a lower amperage.


Sent from my iPhone using Tapatalk

3m 7502 with p100 filters Edit: http://www.amazon.com/3M-Series-Professional-Facepiece-Respirator/dp/B004HXBCMG http://www.amazon.com/gp/aw/d/B007STCT00/ref=pd_aw_sim_200_2?ie=UTF8&dpID=51R34JRMdfL&dpSrc=sims&preST=_AC_UL200_SR200%2C200_&refRID=12DHCQ6NSHWJ5H1KST3G Sent from my iPhon...

Redwing. Been wearing mine for 3 years and still going strong


Sent from my iPhone using Tapatalk

I work at a prop repair company and I would highly recommend send it some where to be professional rebuilt. When we do brass props they are both statically balanced a dynamically balanced. We can also do mri scans of props to verify pitch to make sure that everything is right. We will also polish th...

I'm in the twin cities too and I am definitely in. Thanks!


Sent from my iPhone using Tapatalk