You cannot weld titanium to stainless, at least with any of the conventional processes a typical commercial or home shop uses, SMAW, GMAW and GTAW.
There is plenty of information on welding Titanium available online.
Search found 2632 matches
- by LtBadd
- Sat Oct 03, 2020 6:23 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Titanium welding
- Replies: 16
- Views: 1422
- by LtBadd
- Fri Oct 02, 2020 6:45 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Taking a different approach to independent EN and EP amperag
- Replies: 53
- Views: 10568
Re: Taking a different approach to independent EN and EP amp
Zank - "and went as high as a 1.0/1.5 EN/EP ratio"...Care to offer any insight as to general effects of further imbalance or frequency variations? - I'm that dangerous noob w/dyn400 - Thanks! If you're welding thinner aluminum , say 1/8" or less then your EN requirements are not as g...
- by LtBadd
- Thu Oct 01, 2020 12:28 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Completely new to welding-my introduction and questions
- Replies: 31
- Views: 2461
Re: Completely new to welding-my introduction and questions
My opinion is this: People are just people, nobody has any divine grace. If someone else can do it, so can you. And, the first time they ever welded, they'd never done it before either... I agree My first job I learned to stick and MIG weld, also TIG, and it was aluminum, I had someone there to tea...
- by LtBadd
- Wed Sep 30, 2020 9:34 pm
- Forum: Welding Forum General Shop Talk
- Topic: We need to liven up this forum
- Replies: 56
- Views: 8825
Re: We need to liven up this forum
Coldman wrote:
Example: "you're turnin that bolt the wrong way you drongo!"
- Screenshot 2020-09-27 163950.jpg (80.92 KiB) Viewed 3202 times
- by LtBadd
- Wed Sep 30, 2020 9:32 pm
- Forum: Welding Forum General Shop Talk
- Topic: New SpeedGlas Helmet
- Replies: 15
- Views: 1950
Re: New SpeedGlas Helmet
I thought it was about $600 or so, but could be wrong, still very pricyJayWal wrote:Just from the link you posted, I was actually asking what the conversion to USD would be, I wasn't stating it. I have no idea what the conversion rate is, I just went with 2x
Sent from my SM-G970W using Tapatalk
- by LtBadd
- Wed Sep 30, 2020 9:31 pm
- Forum: Welding Forum General Shop Talk
- Topic: Need Some Metric Sq. Tubing
- Replies: 19
- Views: 1607
Re: Need Some Metric Sq. Tubing
Rick did someone spoil your parade?VA-Sawyer wrote:Sorry, but it isn't made out of Metric Steel, -2 points for not using spec material.
Using your brain to overcome a problem is unacceptable in today's world.
- by LtBadd
- Wed Sep 30, 2020 8:01 pm
- Forum: Welding Forum General Shop Talk
- Topic: Need Some Metric Sq. Tubing
- Replies: 19
- Views: 1607
Re: Need Some Metric Sq. Tubing
Good deal
- by LtBadd
- Wed Sep 30, 2020 8:00 pm
- Forum: Welding Forum General Shop Talk
- Topic: We need to liven up this forum
- Replies: 56
- Views: 8825
Re: We need to liven up this forum
I asked about upgrading the forum software several years back.... still waitingOscar wrote:It's just a miniature chat-room. Seen it integrated in some forums. It's just for small-talk. Obviously not necessary, just a thought.Poland308 wrote:What’s a chat box?
- by LtBadd
- Wed Sep 30, 2020 7:58 pm
- Forum: Welding Forum General Shop Talk
- Topic: New SpeedGlas Helmet
- Replies: 15
- Views: 1950
Re: New SpeedGlas Helmet
Where did you get that price? I believe that my include the PAR systemJayWal wrote:That's, what $1,600 in freedom bucks?? Crazy
Sent from my SM-G970W using Tapatalk
- by LtBadd
- Wed Sep 30, 2020 7:57 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Taking a different approach to independent EN and EP amperag
- Replies: 53
- Views: 10568
Re: Taking a different approach to independent EN and EP amp
This makes me really want to experiment with the Dynasty 280DX at school, I don't think it has the upgrade, but It still has an overwhelming amount of options to explore and when I used it the first time I kept it pretty basic for the most part. Those welds look amazing I have a 700dx at work and h...
- by LtBadd
- Tue Sep 29, 2020 6:52 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Taking a different approach to independent EN and EP amperag
- Replies: 53
- Views: 10568
Re: Taking a different approach to independent EN and EP amp
Does anyone know if the basic Dynasty 280 models are capable of the independent AC card upgrade as well? Or if u get any of the other wave shapes with it? Doubt it. Just bought that machine and wanna know as much as possible before I drop $500. Kinda why I got that machine, plus the deal I got on e...
- by LtBadd
- Sun Sep 27, 2020 11:18 am
- Forum: Wish List
- Topic: Welding Into A Corner
- Replies: 5
- Views: 11752
Re: Welding Into A Corner
I start in the very corner and work out, that way the hardest part is first and as I weld out it gets easier. I find it easier in reverse of this. Establish the puddle, and weld into the corner. That way, the base metal is already hot, and you can flow the puddle into that joint. I agree when weldi...
- by LtBadd
- Sat Sep 26, 2020 10:03 pm
- Forum: Product Reviews
- Topic: Esab Savage A40 helmet
- Replies: 4
- Views: 2970
Re: Esab Savage A40 helmet
Excellent, we expect to see a 2x increase in weld performance!
But seriously you'll like having the latest tech, it is amazing how far the lens has come.
But seriously you'll like having the latest tech, it is amazing how far the lens has come.
- by LtBadd
- Sat Sep 26, 2020 10:00 pm
- Forum: Welding Projects - Welding project Ideas - Welding project plans
- Topic: Heavy equipment repair welding
- Replies: 14
- Views: 1868
Re: Heavy equipment repair welding
Alro locations in Pa.Bls repair wrote:What that?
- by LtBadd
- Sat Sep 26, 2020 8:03 pm
- Forum: Welding Forum General Shop Talk
- Topic: New SpeedGlas Helmet
- Replies: 15
- Views: 1950
New SpeedGlas Helmet
Plenty to like except probably the price, not sure if it's available in the US yet. LINK if you're interested, there is a 16 page brochure that tells all 3M™ Speedglas™ Welding Helmet G5-02 Part no 62 11 20 Launch date 1st September 2020 Curved ADF Light state shade 2,5 Dark state 8-12 • 3M™ Speedgl...
- by LtBadd
- Sat Sep 26, 2020 4:30 pm
- Forum: Wish List
- Topic: Welding Into A Corner
- Replies: 5
- Views: 11752
Re: Welding Into A Corner
I wouldn't say there is a secret, it's just tough. You have to be able to see, have the torch positioned correctly and get the filler in, it's a narrow window where all of these conditions exist and the weld happens. I start in the very corner and work out, that way the hardest part is first and as ...
- by LtBadd
- Fri Sep 25, 2020 6:31 pm
- Forum: Welding Projects - Welding project Ideas - Welding project plans
- Topic: Welding table
- Replies: 15
- Views: 2275
Re: Welding table
BugHunter wrote:^^^^ Nice.
Super nice!!DavidR8 wrote:Very nice!
Sent from my iPhone using Tapatalk
- by LtBadd
- Fri Sep 25, 2020 6:28 pm
- Forum: Welding Forum General Shop Talk
- Topic: die grinders and cut off tool favorites?
- Replies: 16
- Views: 1924
Re: die grinders and cut off tool favorites?
Sounds like you made a good choice Todd, don't forget even with a face shield you need safety glasses tooJustTheDad wrote: He already knows to wear a full face shield when using those.
Thanks again for the feedback earlier.
Todd
- by LtBadd
- Fri Sep 25, 2020 6:21 pm
- Forum: Welding Forum General Shop Talk
- Topic: Need Some Metric Sq. Tubing
- Replies: 19
- Views: 1607
Re: Need Some Metric Sq. Tubing
Just a quick search, online metals has it, usually they allow a custom cut length, not for this though
LINK
If you are on their email list you always get a monthly code for 15% off
LINK
If you are on their email list you always get a monthly code for 15% off
- by LtBadd
- Fri Sep 25, 2020 6:36 am
- Forum: Welding Forum General Shop Talk
- Topic: New Optrel headgear
- Replies: 19
- Views: 1709
Re: New Optrel headgear
Yea, tell them to fly you there and you'll hand deliver itself
- by LtBadd
- Thu Sep 24, 2020 6:40 pm
- Forum: Welding Projects - Welding project Ideas - Welding project plans
- Topic: PrimeWeld TIG 225 adventure begins
- Replies: 144
- Views: 15675
Re: PrimeWeld TIG 225 adventure begins
So I am just curious: does anyone know why the larger bottles are not available for purchase? Is this the case with most all welding supply stores or just this one? What is available in your area? What do you use? Thanks! I rent the largest bottle ("T" size 300cf) of argon for $8.50 per m...
- by LtBadd
- Thu Sep 24, 2020 12:25 pm
- Forum: Welding Forum General Shop Talk
- Topic: New Optrel headgear
- Replies: 19
- Views: 1709
Re: New Optrel headgear
Is it that it will last a year or two, or that it's comfortable and operates as it should? Or all of the aboveBugHunter wrote: If you think about it, it's pretty sad that in today'd day and age, we're still waiting on a functioning headgear for a welding helmet, that will last more than a year or three.
- by LtBadd
- Tue Sep 22, 2020 8:02 pm
- Forum: Welding Projects - Welding project Ideas - Welding project plans
- Topic: PrimeWeld TIG 225 adventure begins
- Replies: 144
- Views: 15675
Re: PrimeWeld TIG 225 adventure begins
With tungsten being so dense, I find it difficult to imagine a softer material could be impregnated into it,(but then I'm not a materials scientist) now if I grind the tungsten to the point of it getting red hot that may change things, even then I would think any minute traces would vaporize as soon...
- by LtBadd
- Mon Sep 21, 2020 7:02 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: The what I welded today (/whenever) thread (pics please)
- Replies: 3253
- Views: 476007
Re: The what I welded today (/whenever) thread (pics please)
Looks good Spartan
- by LtBadd
- Sat Sep 19, 2020 10:03 pm
- Forum: Welding Projects - Welding project Ideas - Welding project plans
- Topic: Bandsaw stand
- Replies: 9
- Views: 1169
Re: Bandsaw stand
Get some paint on there and it'll serve you well
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities