I was wondering why I couldn't log in - thanks for posting.
And you're right, a heads up both times would have been nice.
Search found 1898 matches
- by MinnesotaDave
- Fri Sep 14, 2018 6:51 am
- Forum: Suggestions, Feedback and Support
- Topic: forum changes
- Replies: 10
- Views: 3177
- by MinnesotaDave
- Tue Sep 11, 2018 6:57 am
- Forum: Welding Projects - Welding project Ideas - Welding project plans
- Topic: Shower curtain rod
- Replies: 4
- Views: 1007
Re: Shower curtain rod
Very nice work - the small tube is challenging to make look that good
- by MinnesotaDave
- Sat Sep 08, 2018 10:07 am
- Forum: Fuel Gas Heating
- Topic: Propane forge ideas ?
- Replies: 9
- Views: 11497
Re: Propane forge ideas ?
Nice burners! They look to have a very clean output.
- by MinnesotaDave
- Tue Sep 04, 2018 4:53 pm
- Forum: Stick Welding/Arc Welding - Shielded Metal Arc Welding
- Topic: Know what brand/spec buzz box this is?
- Replies: 12
- Views: 1712
Re: Know what brand/spec buzz box this is?
My guess an old Lincoln. The copper in it is worth more than the machine. Yep. I cringed when my sister hauled a similar one, but with a dial, that was burned up to THE DUMP! I told her she threw away a bunch of money. Made me sick. Stoked that this one works well though. This post is an attempt to...
- by MinnesotaDave
- Sun Aug 26, 2018 11:30 pm
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Mig Spray Transfer with C3 for Mild and Stainless Steel!?!
- Replies: 11
- Views: 1403
Re: Mig Spray Transfer with C3 for Mild and Stainless Steel!
I think that's something i need to think about, i have not done that due to the inconsistency of metering the gases but at this point i might allow me to do whatever i want with any gas i want. Do you do that? I don't much, except for when I'm screwing around in my home shop :D But there are a few ...
- by MinnesotaDave
- Sun Aug 26, 2018 11:20 pm
- Forum: Stick Welding/Arc Welding - Shielded Metal Arc Welding
- Topic: When should i reverse polarity? DC+ to DC-
- Replies: 29
- Views: 27719
Re: When should i reverse polarity? DC+ to DC-
Thanks Dave- maybe i shouldn't of used the words "cant" i should of wrote "shouldn't" anything can be done. I stand by my post with many years of stick welding dating back to 1990. You can run anything you want on DCEN doesn't mean its correct. I'm don't want to get into a pissi...
- by MinnesotaDave
- Sun Aug 26, 2018 8:19 pm
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Mig Spray Transfer with C3 for Mild and Stainless Steel!?!
- Replies: 11
- Views: 1403
Re: Mig Spray Transfer with C3 for Mild and Stainless Steel!
If all you use is variations on argon and co2, why not use a mixer and tailor the gas mixtures as you need them?
- by MinnesotaDave
- Sun Aug 26, 2018 8:15 pm
- Forum: Stick Welding/Arc Welding - Shielded Metal Arc Welding
- Topic: When should i reverse polarity? DC+ to DC-
- Replies: 29
- Views: 27719
Re: When should i reverse polarity? DC+ to DC-
it all depends on what stick you are using and what you welding. I'm not sure why people are saying its for penetration? i mean that's part of it but 7018 and 6010 run in only DCEP. unless you are welding in position then it doesn't matter. you cant run uphill or out of position if you are running ...
- by MinnesotaDave
- Sun Aug 26, 2018 4:49 pm
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Mig Spray Transfer with C3 for Mild and Stainless Steel!?!
- Replies: 11
- Views: 1403
Re: Mig Spray Transfer with C3 for Mild and Stainless Steel!
Why not hook it up and try it, you already have the bottle.
Not going to be out anything.
Not going to be out anything.
- by MinnesotaDave
- Sun Aug 26, 2018 2:10 pm
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Mig Spray Transfer with C3 for Mild and Stainless Steel!?!
- Replies: 11
- Views: 1403
Re: Mig Spray Transfer with C3 for Mild and Stainless Steel!
In the Lincoln GMAW book there is a listing for C2: https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.lincolnelectric.com/assets/global/products/consumable_miggmawwires-superarc-superarcl-56/c4200.pdf&ved=2ahUKEwitlNX6povdAhXE1IMKHXZqBU8QFjANegQIBxAB&usg=AOvVaw1e8B...
- by MinnesotaDave
- Mon Aug 20, 2018 2:44 pm
- Forum: Member Introductions
- Topic: Tig foot switch
- Replies: 2
- Views: 394
Re: Tig foot switch
No reason you can't.
When you use a regular foot control, there is a switch and a rheostat of some type inside.
Sometimes I just set my machine to "panel" and use the foot control for on-off only.
When you use a regular foot control, there is a switch and a rheostat of some type inside.
Sometimes I just set my machine to "panel" and use the foot control for on-off only.
- by MinnesotaDave
- Sun Aug 19, 2018 11:25 am
- Forum: Welding Forum General Shop Talk
- Topic: Proper way of telling a customer no half-way through a job?
- Replies: 17
- Views: 1785
Re: Proper way of telling a customer no half-way through a j
Damn man, I'm happy for you that you got this resolved.
He brought cops??!! Not cool...
He brought cops??!! Not cool...
- by MinnesotaDave
- Fri Aug 17, 2018 3:06 pm
- Forum: Suggestions, Feedback and Support
- Topic: Unable to stay logged in?
- Replies: 20
- Views: 4948
Re: Unable to stay logged in?
I've been having this issue as well, and purging the cookies and cached data only partially fixed it. I just now manually logged into the site as https ://forum.weldingtipsandtricks.com/ and it seems to be working, but the security warnings are complaining about non-secure elements on the pages, pr...
- by MinnesotaDave
- Thu Aug 09, 2018 8:56 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Tig 200 lost display
- Replies: 10
- Views: 1514
Re: Tig 200 lost display
Heck, call that sucker in. That's what I would do. Or maybe they sold you a Minnesota machine, I know I'd be hard to convince to work at 109 degrees :D Do those "Minnesota Machines" also work at -26 degrees? Not sure really, the coldest I've used a plug in machine outside is -20°F It was ...
- by MinnesotaDave
- Thu Aug 09, 2018 7:30 pm
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: Lincoln dual shield flux core?
- Replies: 5
- Views: 2724
Re: Lincoln dual shield flux core?
The dualshield or outershield flux core wire will all have the same problem outside.
If it's windy, loss of shielding gas on the weld.
But self shielded flux core wire work perfect outside. That's 71t-11 most often.
Both self shielded and gas shielded flux core have 0.035" wire available.
If it's windy, loss of shielding gas on the weld.
But self shielded flux core wire work perfect outside. That's 71t-11 most often.
Both self shielded and gas shielded flux core have 0.035" wire available.
- by MinnesotaDave
- Thu Aug 09, 2018 3:38 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Tig 200 lost display
- Replies: 10
- Views: 1514
Re: Tig 200 lost display
Heck, call that sucker in. That's what I would do.
Or maybe they sold you a Minnesota machine, I know I'd be hard to convince to work at 109 degrees
Or maybe they sold you a Minnesota machine, I know I'd be hard to convince to work at 109 degrees
- by MinnesotaDave
- Wed Aug 08, 2018 8:50 am
- Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
- Topic: about MIG- WFS in relation to amps / penetration
- Replies: 3
- Views: 1057
Re: about MIG- WFS in relation to amps / penetration
Mig is really easy to make a weld that doesn't penetrate. For definition of penetration we'll use depth of fusion. Stay with amps (wire feed speed) as your factor in penetration. Just because a person goes slower and puts more overall heat into a piece does not necessarily translate into penetration...
- by MinnesotaDave
- Tue Jul 31, 2018 10:51 pm
- Forum: Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- Topic: Tig Amperage
- Replies: 7
- Views: 4394
Re: Tig Amperage
I agree that there is room to turn up but it depends on if your trying to run it single pass or multi pass. How big the joint is and weather it’s susceptible to heat input or warping. But how will I attain my goal of tig welding at mig speed if I don't turn it up and move? :lol: :D Tig is slower th...
- by MinnesotaDave
- Wed Jul 25, 2018 10:59 pm
- Forum: Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- Topic: Tig Amperage
- Replies: 7
- Views: 4394
Re: Tig Amperage
But how will I attain my goal of tig welding at mig speed if I don't turn it up and move?Poland308 wrote:I agree that there is room to turn up but it depends on if your trying to run it single pass or multi pass. How big the joint is and weather it’s susceptible to heat input or warping.
- by MinnesotaDave
- Wed Jul 25, 2018 8:18 pm
- Forum: Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- Topic: Tig Amperage
- Replies: 7
- Views: 4394
Re: Tig Amperage
140 amps is way too low for me on a 3/8" plate t-joint fillet weld and 1/8" filler rod.
I'd be 180-220+ amps depending on position.
I'd be 180-220+ amps depending on position.
- by MinnesotaDave
- Fri Jul 20, 2018 1:23 pm
- Forum: Stick Welding/Arc Welding - Shielded Metal Arc Welding
- Topic: 7018 Basic Weld Test Vertical Constant Failure Root Pass
- Replies: 12
- Views: 3717
Re: 7018 Basic Weld Test Vertical Constant Failure Root Pass
You're right, it does take a weave. These two Jody videos will hook you up. :) https://m.youtube.com/watch?v=tC7PmksNDhY https://m.youtube.com/watch?v=kblmdScflQU I saw those videos earlier. The problem is that my instructors told me to do the very thing he said not to do which was to just barely g...
- by MinnesotaDave
- Thu Jul 19, 2018 9:12 pm
- Forum: Member Introductions
- Topic: Hello From MN
- Replies: 2
- Views: 375
Re: Hello From MN
Welcome from Bemidji
- by MinnesotaDave
- Thu Jul 19, 2018 9:10 pm
- Forum: Stick Welding/Arc Welding - Shielded Metal Arc Welding
- Topic: 7018 Basic Weld Test Vertical Constant Failure Root Pass
- Replies: 12
- Views: 3717
Re: 7018 Basic Weld Test Vertical Constant Failure Root Pass
You're right, it does take a weave.
These two Jody videos will hook you up.
https://m.youtube.com/watch?v=tC7PmksNDhY
https://m.youtube.com/watch?v=kblmdScflQU
These two Jody videos will hook you up.
https://m.youtube.com/watch?v=tC7PmksNDhY
https://m.youtube.com/watch?v=kblmdScflQU
- by MinnesotaDave
- Sat Jul 14, 2018 1:01 am
- Forum: Welding Forum General Shop Talk
- Topic: I could use some help with aluminum
- Replies: 18
- Views: 2445
Re: I could use some help with aluminum
If in globular your wire speed is already too fast for the voltage.
You need more voltage or less wire speed to get to spray transfer.
Aluminum is not short circuit welding.
Here is a very short video to show what it sounds like in spray.
https://m.youtube.com/watch?v=IHkbh0oKv_g
You need more voltage or less wire speed to get to spray transfer.
Aluminum is not short circuit welding.
Here is a very short video to show what it sounds like in spray.
https://m.youtube.com/watch?v=IHkbh0oKv_g
- by MinnesotaDave
- Wed Jul 11, 2018 5:57 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Bronze turtle project
- Replies: 24
- Views: 3980
Re: Bronze turtle project
This is going to look great
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities