Well, they now have a pardon our dust page up...
Our sites are currently under maintenance.
Please try back later.
We apologize for any inconvenience.
Penton
Books, articles, websites and other sources of information.
- metalman21
-
New Member
-
Posts:
-
Joined:Fri Feb 16, 2018 4:15 pm
-
Location:Connecticut
That's better news than the complete black-out. I've seen it happen before and in one case the had to start over from scratch.
Ernie F.
- MinnesotaDave
-
Weldmonger
-
Posts:
-
Joined:Sun Oct 27, 2013 10:57 pm
-
Location:Big Lake/Monticello MN, U.S.A.
** update **
I've been told progress is being made on the website issues
I've been told progress is being made on the website issues
Dave J.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
- MinnesotaDave
-
Weldmonger
-
Posts:
-
Joined:Sun Oct 27, 2013 10:57 pm
-
Location:Big Lake/Monticello MN, U.S.A.
Pretty much everyone has, who cares.Antorcha wrote:I could have built a building faster.MinnesotaDave wrote:** update **
I've been told progress is being made on the website issues
Actually, I have
I'll be sure to pass along that their computer work is slower than putting up a building... Wait, no i won't since they have nothing to do with each other...
Dave J.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Bill Beauregard
- Bill Beauregard
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 9:32 pm
-
Location:Green Mountains of Vermont
Hit a raw nerve did he?MinnesotaDave wrote:Pretty much everyone has, who cares.Antorcha wrote:I could have built a building faster.MinnesotaDave wrote:** update **
I've been told progress is being made on the website issues
Actually, I have
I'll be sure to pass along that their computer work is slower than putting up a building... Wait, no i won't since they have nothing to do with each other...
- MinnesotaDave
-
Weldmonger
-
Posts:
-
Joined:Sun Oct 27, 2013 10:57 pm
-
Location:Big Lake/Monticello MN, U.S.A.
Not really, just don't like himBill Beauregard wrote:
Hit a raw nerve did he?
Dave J.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Is there any evidence they brought up their other websites before weldingweb? And yes bringing up a webserver could be a quick task. But reconstituting data might not be. And you are assuming the issue is technical and not financial. I dont think you know as much about hosting as you think you do.Even you must realize that when you're going on 2 weeks, it is obviously not the highest priority. Any half ass technician could rebuild that server in an afternoon. I don't know the company but somewhere it was stated they had 6 or 7 major sites go down they were responsible for.
Multimatic 255
- MinnesotaDave
-
Weldmonger
-
Posts:
-
Joined:Sun Oct 27, 2013 10:57 pm
-
Location:Big Lake/Monticello MN, U.S.A.
I actually have no idea how long it takes, but I wish they would finish because there's a lot of excellent information on that website.aland wrote:
Dave,
Even you must realize that when you're going on 2 weeks, it is obviously not the highest priority. Any half ass technician could rebuild that server in an afternoon. I don't know the company but somewhere it was stated they had 6 or 7 major sites go down they were responsible for.
This tells us that those other sites were much more important than WeldingWeb. If you're loosing revenue, the bean counters will be even less happy...I'm pretty sure they will get around to it when they can, it's not as if nobody is letting them know that people are waiting patiently for WeldingWeb to come back up.
I wouldn't want to be in their shoes...somebody has been in the fire for going on 2 weeks...and that is no fun...my condolences to whoever that may be...
Alan
But, for all I know it's been sold and some new owner is deciding what to do with it
Dave J.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
- MinnesotaDave
-
Weldmonger
-
Posts:
-
Joined:Sun Oct 27, 2013 10:57 pm
-
Location:Big Lake/Monticello MN, U.S.A.
Never liked the "D" handle router, too bulky for my tastes. Plunge routers are OK, but a little heavy and awkward for many tasks.aland wrote:Good point, and for me also, I have no clue why the server hadn't been up for almost 2 weeks, I was merely going by what you said previously in the following post. For all I know that isn't even the case. I can think of a lot of "for all I knows...", but will refrain from comment as it seems nobody really knows what happened. And, for all I know, the servers are still up and a router went down...MinnesotaDave wrote:But, for all I know it's been sold and some new owner is deciding what to do with it
New one hand routers are small and cute - easy handling for little jobs.
That's the extent of my router knowledge
Dave J.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
- MinnesotaDave
-
Weldmonger
-
Posts:
-
Joined:Sun Oct 27, 2013 10:57 pm
-
Location:Big Lake/Monticello MN, U.S.A.
I'm looking to buy a router table for school. Sometimes it looks like it would be easier for younger kids.Poland308 wrote:I bought the Dewalt router with three bases. But I mostly leave it attached to the router table.
I have a 7th/8th grade wood shop class.
Can't decide if that would be safer, or more dangerous, than using the regular router though.
Dave J.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Bill Beauregard
- Bill Beauregard
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 9:32 pm
-
Location:Green Mountains of Vermont
Every hand held tool is very hazardous. I've spent a lifetime using the biggest hand held drills on the market at the time. The only injury I ever suffered was of my dignity one day when a 4-1/2 " hole saw on a 18" arbor went errant, and swallowed my pants. Not a drop of blood was shed that day, but I'm not mentioning embarrassment.MinnesotaDave wrote:I'm looking to buy a router table for school. Sometimes it looks like it would be easier for younger kids.Poland308 wrote:I bought the Dewalt router with three bases. But I mostly leave it attached to the router table.
I have a 7th/8th grade wood shop class.
Can't decide if that would be safer, or more dangerous, than using the regular router though.
A year and change ago I observed a counter man in a plumbing supply store struggling to put an auxiliary handle on a compact cordless drill. I was amused. A little drill like that won't require an extra long handle. Ten minutes later, I bought two of them. The first time I used mine with a 4" hole saw cutting through multi layers of sheathing boards, clapboards, lath, and plaster, sheetrock, I injured my rotator cuff in my right shoulder. Adding the auxiliary handle, and trying again, I finished off my rotator cuff. A year plus later, I'm back to normal.
Tools are dangerous, Without coaching, tools are very dangerous. Personally, based purely on logic, a stationary tool seems less hazardous than one that can swing around, engaging flesh.
There was a show on television called, (I recall) Real Stories Of The E. R. There was a man standing on a ten foot tall step ladder, It sat on uneven ground. Reaching over his head, probably too high for his ladder, he used a Hole Hog, a Milwaukee drill notorious for injuries. The auger bit, made for wood was 18" long, 1" diameter. His ladder gave way, he fell, and the still running drill drove the auger in his eye, and out the top of his skull.
Miraculously, he survived, and will spend the rest of his life with coloring books, and crayons.
Bill Beauregard
- Bill Beauregard
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 9:32 pm
-
Location:Green Mountains of Vermont
PS: I'm sort of saying that whatever happens at Welding Web will happen without us. They haven't opted to confide in us. They will, or won't be back. In the meantime, no thread ever was more ripe for a derail.
Willie
Willie
- MinnesotaDave
-
Weldmonger
-
Posts:
-
Joined:Sun Oct 27, 2013 10:57 pm
-
Location:Big Lake/Monticello MN, U.S.A.
**** New update ****
THIS JUST IN FROM FIX IT CENTRAL IN NEW YORK..
We have not forgotten about you. The IT team is literally piecing our sites back together one by one, and byte by byte, from the failed SAN array. It’s obviously a catastrophic issue.
Dave J.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Return to “The Welding Library”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities