I don't know that its a problem with young people in their late teens and early 20's so much. I think people should have a basic concept of tools and how they work/purpose far earlier than that. I learnt by trial and error mostly from a very early age and I also live in an urban area not a farm. Eg, I was using angle grinders when I was 10-12 or so, and the only instruction I had was keep the axis out of the line of sight so if something comes flying off you don't loose and eye. No safety glasses here just bodgy parenting lol. I learnt what happens when you plug it in when its on a bench and haven't checked the switch is off. But all that unsafe mucking around in the garage with different stuff had a huge effect later on. Looking back I took for granted having self confidence to just give something a go, tear it down see how it works and put it back together etc but it goes a long way all through life. I can't help but feel that age bracket from about 8 to 15 is where a lot of that was developed.
Apart from all the social media/iphone/selfies bullshit, one of the biggest changes in the past few decades that is pretty obvious is the amount of cotton wool we keep our kids in. A smack over the knuckles with a ruler is barbaric, yet the school demanding your 8yo boy be medicated with Ritalin or dexamphetamine is ok. We used to have old trains here in the 80's and early 90's and the doors didn't close or could easily be forced open. Trains packed full of school kids would be seen with a bunch of heads hanging out the doors. Imagine if that happened today, people would lose their shit. And don't get me started on fireworks lol. I just can't help but think its not actually their fault, as much as I love putting shit on em. Their attitude towards work and the value of learning skills in general may be lousy but it goes straight back to their parents, can't blame everything on modern technology.
Ok rant over.
General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
Scars are one thing, a body full of scars is a pointer to something else Remember, hard work still deserves you use your brain to avoid the hazards. Don't just rely on braun, think it out, then drop a shoulder into it. Sometimes, life won't offer a mulliganFarmwelding wrote:Scars are like the best thing ever. Good for starting stories off! And they are good reminders of what not to do. Like me I have a great scar from this summer on my left index finger from a chop saw. Cutting some stainless tubing from an old barn. Turned it off and slammed my hand into it. Now I know not to do that. Or when I slammed a nail through an inch of rubber from the same barn demolition. Or my most recent one when a shot a staple gun into my finger this weekend. This just goes to show that engineers are sometimes stupid and put things in the most stupid way. I put the handle the wrong way and shot it right in.
I used to work some with a local hoe operator that was the poster boy for scars and missing body parts. Few finger sections gone-bumps bruises etc. We called him "dangerous Dan Magoo" ( not his real name). Nice guy but when he was operating everyone kept well out of boom reach. I noticed over the years anyone whatever age who was missing parts or always nursing a boo-boo to be extra cautious when working around him. It only takes seconds to take precautions-safety glasses-heavy gloves -clear work area etc.- much less than needed to run for the medical supplies. You can't prevent everything but best to try to keep the damage to a minimum.
- One of a kind
-
Workhorse
-
Posts:
-
Joined:Wed Feb 08, 2017 6:44 pm
-
Location:North Central Indiana
Robots are the coming thing....learning how to program,repair and maintain them are the jobs of the future.
Future? I work with them. Dumb little blobs of tech that get confused at the drop of spit.One of a kind wrote:Robots are the coming thing....learning how to program,repair and maintain them are the jobs of the future.
But they sure beat having to manually perform tasks.
Oh, scars are earned. Hopefully you learn too. Anyone can buy s tattoo.
Quit spitting on the floor.Keith_J wrote:Future? I work with them. Dumb little blobs of tech that get confused at the drop of spit.One of a kind wrote:Robots are the coming thing....learning how to program,repair and maintain them are the jobs of the future.
But they sure beat having to manually perform tasks.
Oh, scars are earned. Hopefully you learn too. Anyone can buy s tattoo.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
I like to joke that if I haven't drawn blood by nine AM, I'm having a bad day. Little nicks and burns are part of the game. It's not actually a daily thing, but anymore I don't even notice the small stuff until someone asks me why I'm bleeding. I should point out that with the medication I'm on a papercut can look serious to the untrained eye...
Steve S
Steve S
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
That's one of the things I've never understood-how can I cut myself and notice for over an hour? Doesn't make any sense.Otto Nobedder wrote:I like to joke that if I haven't drawn blood by nine AM, I'm having a bad day. Little nicks and burns are part of the game. It's not actually a daily thing, but anymore I don't even notice the small stuff until someone asks me why I'm bleeding. I should point out that with the medication I'm on a papercut can look serious to the untrained eye...
Steve S
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
I'll come in from work and my wife will ask why I have blood on my face...and i usually have no idea where it came from or what even happened to me.Farmwelding wrote:That's one of the things I've never understood-how can I cut myself and notice for over an hour? Doesn't make any sense.Otto Nobedder wrote:I like to joke that if I haven't drawn blood by nine AM, I'm having a bad day. Little nicks and burns are part of the game. It's not actually a daily thing, but anymore I don't even notice the small stuff until someone asks me why I'm bleeding. I should point out that with the medication I'm on a papercut can look serious to the untrained eye...
Steve S
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Your mind is focused on the task, and you're so accustomed to minor pains, one overrides the other.Farmwelding wrote:That's one of the things I've never understood-how can I cut myself and notice for over an hour? Doesn't make any sense.Otto Nobedder wrote:I like to joke that if I haven't drawn blood by nine AM, I'm having a bad day. Little nicks and burns are part of the game. It's not actually a daily thing, but anymore I don't even notice the small stuff until someone asks me why I'm bleeding. I should point out that with the medication I'm on a papercut can look serious to the untrained eye...
Steve S
That's all I can figure. Until you get in the acetone... THEN the day's adventures become "painfully" clear...
Steve S
Ironically I was reading this post and thinking about why my arm was raw feeling. Then I remembered all those scratches came from 8 am when I wedged my arm in to clean out a hole in a wall.
I have more questions than answers
Josh
Josh
- WoodpeckerWelder
-
Workhorse
-
Posts:
-
Joined:Sun Feb 12, 2017 1:08 am
-
Location:N Georgia USA
Acetone? Oh yeah..... The stuff I call "Liquid Cut Finder"!Otto Nobedder wrote:Your mind is focused on the task, and you're so accustomed to minor pains, one overrides the other.Farmwelding wrote:That's one of the things I've never understood-how can I cut myself and notice for over an hour? Doesn't make any sense.Otto Nobedder wrote:I like to joke that if I haven't drawn blood by nine AM, I'm having a bad day. Little nicks and burns are part of the game. It's not actually a daily thing, but anymore I don't even notice the small stuff until someone asks me why I'm bleeding. I should point out that with the medication I'm on a papercut can look serious to the untrained eye...
Steve S
That's all I can figure. Until you get in the acetone... THEN the day's adventures become "painfully" clear...
Steve S
"Why is there never time to do anything right the first time but always time to do it again?"
- LtBadd
-
Weldmonger
-
Posts:
-
Joined:Sun Apr 12, 2015 4:00 pm
-
Location:Clearwater FL
-
Contact:
Actually this is one of the signs of alien abduction, Jeff any other odd or unusual physical or mental issues?exnailpounder wrote: I'll come in from work and my wife will ask why I have blood on my face...and i usually have no idea where it came from or what even happened to me.
Richard
Website
Website
I am sitting here reading this , and both of my hands got bloody today, broke a tap handle, and busted my knuckles, then the other hand slid across the broken part, and I almost pissed down my leg when I picked up and moved a soaked with Acetone towel....
Thespian is just an old username I have used forever , my name is Bill
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
You all must use a ton of acetone or something. It's like all of you have a ton of experience with the "cut finder" I have never had this issue. I usually find my cuts by getting some diesel, gas, oil, dirt, gravel, or my favorite grease- the dirt and grease darken everything except the cut-the cut is very vibrant and easily shown.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
I worked with mitered and lots of cut angles of aluminum extrusions for a long time and those things will just unzip you and you'd never even know it. Those weird razor like ones that don't bleed for a little bit, then dripdripdrip...
It wasn't odd at all to hear it called out in the shop- "Who's bleeding?".
It wasn't odd at all to hear it called out in the shop- "Who's bleeding?".
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
If you cut up hot chillis, like harbineros or similar, wash your hands BEFORE going to the toilet. (Or putting your fingers into someplace important). A funny story until it happens to you.
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Mostly mental but I thought it was from drinkingLtBadd wrote:Actually this is one of the signs of alien abduction, Jeff any other odd or unusual physical or mental issues?exnailpounder wrote: I'll come in from work and my wife will ask why I have blood on my face...and i usually have no idea where it came from or what even happened to me.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Hahaha!weldin mike 27 wrote:If you cut up hot chillis, like harbineros or similar, wash your hands BEFORE going to the toilet. (Or putting your fingers into someplace important). A funny story until it happens to you.
Happened to me and the wife at the same time.
Last time she'll ever fall for that one
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Brake and carb cleaner finds them too. Nothing is more of a nuisance than a metal sliver you don't know you have until you touch another piece of metal or put on gloves....then you can't get the damned thing out.Farmwelding wrote:You all must use a ton of acetone or something. It's like all of you have a ton of experience with the "cut finder" I have never had this issue. I usually find my cuts by getting some diesel, gas, oil, dirt, gravel, or my favorite grease- the dirt and grease darken everything except the cut-the cut is very vibrant and easily shown.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
My old "college days" hemostats have a prominent place in my tool box just for removing such annoyances...exnailpounder wrote:Brake and carb cleaner finds them too. Nothing is more of a nuisance than a metal sliver you don't know you have until you touch another piece of metal or put on gloves....then you can't get the damned thing out.Farmwelding wrote:You all must use a ton of acetone or something. It's like all of you have a ton of experience with the "cut finder" I have never had this issue. I usually find my cuts by getting some diesel, gas, oil, dirt, gravel, or my favorite grease- the dirt and grease darken everything except the cut-the cut is very vibrant and easily shown.
Steve S
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
I know a guy who fell off his pushbike and ripped off his finger in some tram tracks.....even he is still annoyed by those little metal slivers.
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
I still have my roach cl....I mean hemostats tooOtto Nobedder wrote:My old "college days" hemostats have a prominent place in my tool box just for removing such annoyances...exnailpounder wrote:Brake and carb cleaner finds them too. Nothing is more of a nuisance than a metal sliver you don't know you have until you touch another piece of metal or put on gloves....then you can't get the damned thing out.Farmwelding wrote:You all must use a ton of acetone or something. It's like all of you have a ton of experience with the "cut finder" I have never had this issue. I usually find my cuts by getting some diesel, gas, oil, dirt, gravel, or my favorite grease- the dirt and grease darken everything except the cut-the cut is very vibrant and easily shown.
Steve S
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
We all have a past. No two alike, but often with similarities. I'm not ashamed of anything I've done. Stories and scars are similar creatures. Precious to who we've become, and better with each telling.
The older I get, the better I was....
Steve S
The older I get, the better I was....
Steve S
Return to “Welding Forum General Shop Talk”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities