General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
Rhyno21
  • Posts:
  • Joined:
    Tue May 13, 2014 2:11 pm
  • Location:
    San Jose, CA

Well I know we have assists available like at my school we have:
Gantry crane, a forklift, handcart. I understand that everyone should be physically able to do most on the job tasks. I understand how there are guidelines that I need to know. Just until mom said how we don't know how much you will need to carry. I grateful for you guys being honest. I understand that young guys such myself needs to do some on the job weight lifting.
Hot rods and burning matal by day
User avatar
  • Posts:
  • Joined:
    Sun Oct 27, 2013 10:57 pm
  • Location:
    Big Lake/Monticello MN, U.S.A.

Rhyno21 wrote:Well I know we have assists available like at my school we have:
Gantry crane, a forklift, handcart. I understand that everyone should be physically able to do most on the job tasks. I understand how there are guidelines that I need to know. Just until mom said how we don't know how much you will need to carry. I grateful for you guys being honest. I understand that young guys such myself needs to do some on the job weight lifting.
What's very important is you do actual weight lifting and stay in good physical condition.

You will hurt yourself if you don't make sure you are strong and fit.

Also, when it truly is too heavy, don't try to lift it anyway, you'll pay for it the rest of your life.

Be strong, but be smart. :D
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
PeteM
  • Posts:
  • Joined:
    Sat Dec 03, 2016 11:28 am
  • Location:
    Pittsburgh

MinnesotaDave wrote:
Rhyno21 wrote:Well I know we have assists available like at my school we have:
Gantry crane, a forklift, handcart. I understand that everyone should be physically able to do most on the job tasks. I understand how there are guidelines that I need to know. Just until mom said how we don't know how much you will need to carry. I grateful for you guys being honest. I understand that young guys such myself needs to do some on the job weight lifting.
What's very important is you do actual weight lifting and stay in good physical condition.

You will hurt yourself if you don't make sure you are strong and fit.

Also, when it truly is too heavy, don't try to lift it anyway, you'll pay for it the rest of your life.

Be strong, but be smart. :D
Aside from the obvious- strength, I also just generally feel a lot better from lifting. Better appetite, sleep, energy levels, etc. It has a lot of over all benefits.
User avatar
  • Posts:
  • Joined:
    Tue Dec 13, 2016 9:24 pm
  • Location:
    Clearwater Florida

Nothing wrong with lifting stuff, just don't overdo it. They might now you as the one guy that lifts everything at work but 20 years from now, they'll know you as the dumbass who lifted everything at work and can't walk straight anymore.

See it all the time.
if there's a welder, there's a way
PeteM
  • Posts:
  • Joined:
    Sat Dec 03, 2016 11:28 am
  • Location:
    Pittsburgh

Yeah, I hear you. There's a lot of bull strong guys that can heave-ho strong as an ox when they're young, then one day they sneeze and out goes a couple of disks.

Aside from wrestling since 4th grade,I've trained power lifting and olympic lifting intermittently for almost 20 years (now 44). In that time I've worked with some great strength and conditioning coaches and study it a bit myself. There's a lot that goes into knowing how to move and to keep moving. My main points of emphasis have been mobility and joint stability- then strength and conditioning. I've recently started back after a long break to give my kid time to grow up a little so that he isn't a hazard in the weight room.

Nothing like a toddler hugging your leg in the middle of a 350lb. squat! :o
User avatar
  • Posts:
  • Joined:
    Tue Dec 13, 2016 9:24 pm
  • Location:
    Clearwater Florida

PeteM wrote:
Nothing like a toddler hugging your leg in the middle of a 350lb. squat! :o
Dude..... :lol:

Lets see just how long you can hold that bar with one leg as you move him away with one foot :lol:
if there's a welder, there's a way
electrode
  • Posts:
  • Joined:
    Wed Nov 02, 2016 5:02 pm

Hand me that piano. :P
electrode
  • Posts:
  • Joined:
    Wed Nov 02, 2016 5:02 pm

exnailpounder wrote: These days I drink vodka and Sunny D. I used to brew my own beer and really was into it and I learned how distill and make world class whisky and vodka but the only satisfaction I have ever gotten from alcohol is drinking it...and then getting up in the morning and doing my thing all day and then doing it all again day after day. In other words...controlling something that has contolled and ruined so many lives. I use alcohol...I don't let it use me. ;)
Sounds like a good story... ;) I used to make beer too. Mainly drank vodka in the summer and switched back to whiskey for the winter. Then stuck with whiskey all year. Now its wine. There's a new sheriff in town! I am controlling the alcohol too. :lol:
PeteM
  • Posts:
  • Joined:
    Sat Dec 03, 2016 11:28 am
  • Location:
    Pittsburgh

Olivero wrote:
PeteM wrote:
Nothing like a toddler hugging your leg in the middle of a 350lb. squat! :o
Dude..... :lol:

Lets see just how long you can hold that bar with one leg as you move him away with one foot :lol:
That wasn't even the bad part. We use a rack for squats.

When he grabbed and tried to hang off of the collar while I was dead lifting was the bad part.

Me- "Eric, grab him, would ya?"

Lifting Partner "Oh Sh*T!"

The little bugger is good now though. He has two 5 lb. dumbells that he runs around with doing farmers walks with.
.
Rhyno21
  • Posts:
  • Joined:
    Tue May 13, 2014 2:11 pm
  • Location:
    San Jose, CA

"Postby Olivero » Fri Apr 14, 2017 10:12 am
Nothing wrong with lifting stuff, just don't overdo it. They might now you as the one guy that lifts everything at work but 20 years from now, they'll know you as the dumbass who lifted everything at work and can't walk straight anymore."
Yes I agree currently with school and my apprenticeship taking a lot of my time I have not been able to workout. I won't be the guy getting dragged of the weights as I did track and field 100 yard dash and shot out and discus throwing. I know my stuff with weights at the gym.
Hot rods and burning matal by day
User avatar
  • Posts:
  • Joined:
    Tue Dec 13, 2016 9:24 pm
  • Location:
    Clearwater Florida

PeteM wrote:
Olivero wrote:
PeteM wrote:
Nothing like a toddler hugging your leg in the middle of a 350lb. squat! :o
Dude..... :lol:

Lets see just how long you can hold that bar with one leg as you move him away with one foot :lol:
That wasn't even the bad part. We use a rack for squats.

When he grabbed and tried to hang off of the collar while I was dead lifting was the bad part.

Me- "Eric, grab him, would ya?"

Lifting Partner "Oh Sh*T!"

The little bugger is good now though. He has two 5 lb. dumbells that he runs around with doing farmers walks with.
.

Haha, that's awesome. :D
if there's a welder, there's a way
User avatar
  • Posts:
  • Joined:
    Tue Dec 13, 2016 9:24 pm
  • Location:
    Clearwater Florida

Rhyno21 wrote:"Postby Olivero » Fri Apr 14, 2017 10:12 am
Nothing wrong with lifting stuff, just don't overdo it. They might now you as the one guy that lifts everything at work but 20 years from now, they'll know you as the dumbass who lifted everything at work and can't walk straight anymore."
Yes I agree currently with school and my apprenticeship taking a lot of my time I have not been able to workout. I won't be the guy getting dragged of the weights as I did track and field 100 yard dash and shot out and discus throwing. I know my stuff with weights at the gym.
Welding and metal working in general will give you strength, I am not saying you have to go to the Gym, just don't lift shit if you don't have to.
if there's a welder, there's a way
Rudy Ray
  • Posts:
  • Joined:
    Tue Jan 24, 2017 7:36 pm
  • Location:
    Fresno, California

I guess Miller didn't pay attention to the OSHA regulations when they made their Suitcase "portable wire feeder". It's got to weigh 40 lbs alone, then add a 33 lb spool of wire and a 15 lb torch and carry that up a ladder into a crawl space dragging the welding leads behind you.

Maybe when I was 35, but I'm approaching 50 and it's getting harder.
Rhyno21
  • Posts:
  • Joined:
    Tue May 13, 2014 2:11 pm
  • Location:
    San Jose, CA

Well I understand Olivero. Just doing a double sided V groove 8 grooves in total. 1/4 or 3/8 plate between and it takes all my strength to hold it at waist or chest height.
Hot rods and burning matal by day
User avatar
  • Posts:
  • Joined:
    Tue Dec 13, 2016 9:24 pm
  • Location:
    Clearwater Florida

Well, there you go.
if there's a welder, there's a way
Post Reply