General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
I didn't mean I'd skip a weld because of being in a hurry. It's mostly when I'm stick welding I rush the weld. At my day job we build bobcat and tractor implements. We get paid production so you guessed it, we try to weld hot and fast. It carries over sometimes.
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
What kind of implements do you build?jroark wrote:I didn't mean I'd skip a weld because of being in a hurry. It's mostly when I'm stick welding I rush the weld. At my day job we build bobcat and tractor implements. We get paid production so you guessed it, we try to weld hot and fast. It carries over sometimes.
And here is the question I've wondered for awhile-what process do you use for that-short circuit, spray, dual shield? And what do you use stick for on them?
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
We build buckets, brush cutters, augers and anything else. We just run our wire up to about 800ipm and around 30.5 voltage. I stick weld when I do repairs for other people. Not at my day job. We also don't use dual shield. I guess it's too smoky for an indoor application. Especially with gen or twelve welders.
Skipping welds was just an example, not accusing you of it.jroark wrote:I didn't mean I'd skip a weld because of being in a hurry. It's mostly when I'm stick welding I rush the weld. At my day job we build bobcat and tractor implements. We get paid production so you guessed it, we try to weld hot and fast. It carries over sometimes.
There are many ways to cut corners when welding or fabricating because there is lots to do. So why are you concerned your not doing your best or its not perfect?
if there's a welder, there's a way
It's cool. I didn't take you that way. Right now I'm building some tables and it seems like no matter how hard I try I can't get it the way I want it.
I guess I just want everything to be dead nuts square and machine shop quality and sometimes I might have something a bit out of square or a little bit of spatter on something after it's already powder coated . I don't have my own machine shop so I guess I'll have to settle but I've been buying better stuff as I go and I can tell I'm getting better results .
When I look back on all my work there's just something that I wish I'd have done different or better. It's all good though. So far everyone's been happy and nothing has broken so I'm happy too. I just want to have some WT&T skills. I'll get there. Maybe when I originally posted this I was just having one of those blues moments.
I guess I just want everything to be dead nuts square and machine shop quality and sometimes I might have something a bit out of square or a little bit of spatter on something after it's already powder coated . I don't have my own machine shop so I guess I'll have to settle but I've been buying better stuff as I go and I can tell I'm getting better results .
When I look back on all my work there's just something that I wish I'd have done different or better. It's all good though. So far everyone's been happy and nothing has broken so I'm happy too. I just want to have some WT&T skills. I'll get there. Maybe when I originally posted this I was just having one of those blues moments.
jroark wrote:It's cool. I didn't take you that way. Right now I'm building some tables and it seems like no matter how hard I try I can't get it the way I want it.
I guess I just want everything to be dead nuts square and machine shop quality and sometimes I might have something a bit out of square or a little bit of spatter on something after it's already powder coated . I don't have my own machine shop so I guess I'll have to settle but I've been buying better stuff as I go and I can tell I'm getting better results .
When I look back on all my work there's just something that I wish I'd have done different or better. It's all good though. So far everyone's been happy and nothing has broken so I'm happy too. I just want to have some WT&T skills. I'll get there. Maybe when I originally posted this I was just having one of those blues moments.
I feel you man, I am in the same shoes as you.
We look back at some of the first stuff we built and at that time it was god like but now its crap, I even went and rebuilt something because it looked so bad to me now
It happens, I think of everything being handmade and uniquie, its not a robot, its not 5 different people, from cut to shape to weld to finish, its all me. That's special and it will have its flaws to show it
Its a good viewpoint to have, it keeps you on your toes and keeps you wanting to improve, that's important.
if there's a welder, there's a way
The devil is in the details.
That is the bane of any craftsman's existence. When you're there making something and there's that little something that coulda shoulda woulda been better if...
I have a ton of those little things in places from the church down the street from me to St. Patrick's cathedral in New York. No one else ever notices.
That is the bane of any craftsman's existence. When you're there making something and there's that little something that coulda shoulda woulda been better if...
I have a ton of those little things in places from the church down the street from me to St. Patrick's cathedral in New York. No one else ever notices.
If one of your welding buddies looks they might see it though. That's what I always ask myself. "What would Kent say? Or I wonder if Josh would notice that?"
They probably have the same thoughts though. They probably don't worry if I'd see their mistakes though. Haha.
They probably have the same thoughts though. They probably don't worry if I'd see their mistakes though. Haha.
Oh yeah, I get that. We used to be especially hard on new guys in- of all things- barge repair and restoration. Dirty rotten metal that would never see the light of day after the welds were done. But a new kid would ask "How does this look?" and we'd give it the old "Hmm... " stink eye. It pushes progress and skill though, and the do have to be good, no matter where they're at.
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
Kind of reminds me of welding school when watching somebody else's bend test-making noises that make it questionable and then they get real worried. Then crap gets real serious when they actually fail but you still mess with them regardlessPeteM wrote:Oh yeah, I get that. We used to be especially hard on new guys in- of all things- barge repair and restoration. Dirty rotten metal that would never see the light of day after the welds were done. But a new kid would ask "How does this look?" and we'd give it the old "Hmm... " stink eye. It pushes progress and skill though, and the do have to be good, no matter where they're at.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
We'd always watch the track cutter as it cut the coupon. When the torch hits a slag inclusion the molten steel shoots up like a little geyser. Everybody would cheer like old faithful just went off. "Yeah!!! We have a winner!" and such.Farmwelding wrote:Kind of reminds me of welding school when watching somebody else's bend test-making noises that make it questionable and then they get real worried. Then crap gets real serious when they actually fail but you still mess with them regardlessPeteM wrote:Oh yeah, I get that. We used to be especially hard on new guys in- of all things- barge repair and restoration. Dirty rotten metal that would never see the light of day after the welds were done. But a new kid would ask "How does this look?" and we'd give it the old "Hmm... " stink eye. It pushes progress and skill though, and the do have to be good, no matter where they're at.
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
And the rest of us are just bummed about having a small pee-peejroark wrote:Thanks to Jody and some of you guys outstanding looking work I've developed a complex. I can't seem to do a job any more without wondering if Jody or some of the great welders I know would approve. I'm not welding skyscrapers or anything like that but sometimes I feel like I have to say "ok, that's good enough". I give it my best but I ALWAYS feel like it could be better. So do any of you guys feel like this? That is those of you that don't weld as good as Jody.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
exnailpounder wrote:And the rest of us just fret about having a small pee-peejroark wrote:Thanks to Jody and some of you guys outstanding looking work I've developed a complex. I can't seem to do a job any more without wondering if Jody or some of the great welders I know would approve. I'm not welding skyscrapers or anything like that but sometimes I feel like I have to say "ok, that's good enough". I give it my best but I ALWAYS feel like it could be better. So do any of you guys feel like this? That is those of you that don't weld as good as Jody.
There he is!
A few people were speculating about your where abouts. There were a few threads that were missing your special touch.
NAIL! Finally, your back.exnailpounder wrote:And the rest of us are just bummed about having a small pee-peejroark wrote:Thanks to Jody and some of you guys outstanding looking work I've developed a complex. I can't seem to do a job any more without wondering if Jody or some of the great welders I know would approve. I'm not welding skyscrapers or anything like that but sometimes I feel like I have to say "ok, that's good enough". I give it my best but I ALWAYS feel like it could be better. So do any of you guys feel like this? That is those of you that don't weld as good as Jody.
I was starting to get worried you were actually doing some work for once
if there's a welder, there's a way
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Nahhh...just got into an extended battle wrestling with my conscience...and I killed himOlivero wrote:NAIL! Finally, your back.exnailpounder wrote:And the rest of us are just bummed about having a small pee-peejroark wrote:Thanks to Jody and some of you guys outstanding looking work I've developed a complex. I can't seem to do a job any more without wondering if Jody or some of the great welders I know would approve. I'm not welding skyscrapers or anything like that but sometimes I feel like I have to say "ok, that's good enough". I give it my best but I ALWAYS feel like it could be better. So do any of you guys feel like this? That is those of you that don't weld as good as Jody.
I was starting to get worried you were actually doing some work for once
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
There is always a point of bo return as well so just watch it and make sure it doesn't get out of handOlivero wrote:jroark wrote:I didn't think this was the place to talk about our pee-pee problems. Haha
You can talk about anything anywhere around here, just look at Nail
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
I knew right especially coming from me. And of course there was a spelling errorLtBadd wrote:The law has been laid down!Farmwelding wrote:There is always a point of bo return as well so just watch it and make sure it doesn't get out of hand
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
- MinnesotaDave
-
Weldmonger
-
Posts:
-
Joined:Sun Oct 27, 2013 10:57 pm
-
Location:Big Lake/Monticello MN, U.S.A.
...and another one...Farmwelding wrote:I knew right especially coming from me. And of course there was a spelling errorLtBadd wrote:The law has been laid down!Farmwelding wrote:There is always a point of bo return as well so just watch it and make sure it doesn't get out of hand
Dave J.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~
Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
Well crap... I can't win today. Sorry everyone for the improper grammar. I well trie two ficks it laetir wen I git two English claesss
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
Return to “Welding Forum General Shop Talk”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities