Heat Paste
Posted: Thu May 25, 2017 8:05 pm
I plan on getting a can soon. It was priced at about 25$
- IMG_0307.JPG (34.16 KiB) Viewed 1531 times
Welding Tips and Tricks
The Forum
https://forum.weldingtipsandtricks.com/
Heat Paste
https://forum.weldingtipsandtricks.com/viewtopic.php?f=2&t=11805
Page 1 of 2
Re: Heat Paste
Posted: Thu May 25, 2017 8:24 pm
I haven't used that but I was recently shown this.
I plan on getting a can soon. It was priced at about 25$
I plan on getting a can soon. It was priced at about 25$
Re: Heat Paste
Posted: Thu May 25, 2017 8:25 pm
I have to drive by the Brownells new headquarters on my way home tomorrow.
Re: Heat Paste
Posted: Thu May 25, 2017 8:32 pm
Reusable, that sounds good, I'll have to look into that. Thanks for posting that Josh
Re: Heat Paste
Posted: Thu May 25, 2017 8:32 pm
I've used an aerosol gel heat-block spray, but I haven't done a real comparison to tell you if it had any effect short of costing money.
Steve
Steve
Re: Heat Paste
Posted: Fri May 26, 2017 11:49 am
I used to use that stuff on my wiener but it itches too much to tolerate.LtBadd wrote:Has anyone used this Heat Paste?
Re: Heat Paste
Posted: Fri May 26, 2017 12:33 pm
Well you just have to learn to read the label first.electrode wrote:I used to use that stuff on my wiener but it itches too much to tolerate.LtBadd wrote:Has anyone used this Heat Paste?
Re: Heat Paste
Posted: Fri May 26, 2017 1:17 pm
LtBadd wrote:Well you just have to learn to read the label first.electrode wrote:I used to use that stuff on my wiener but it itches too much to tolerate.LtBadd wrote:Has anyone used this Heat Paste?
Re: Heat Paste
Posted: Fri May 26, 2017 3:59 pm
See....and you guys think I'm badLtBadd wrote:Well you just have to learn to read the label first.electrode wrote:I used to use that stuff on my wiener but it itches too much to tolerate.LtBadd wrote:Has anyone used this Heat Paste?
It must be breeding season...every thread turns into a soft porn article. Hope farm kid doesn't see this 
He might get corrupted 
Re: Heat Paste
Posted: Fri May 26, 2017 4:38 pm
Wow...I guess it is too late. Must be spring fever
Here's my question-what is this heat paste? Does it reduce heat input or what?
Here's my question-what is this heat paste? Does it reduce heat input or what?
Re: Heat Paste
Posted: Fri May 26, 2017 4:45 pm
It absorbs heat...kinda like a chunk of AL or copper. Nice to have if your welding near something that can be ruined by heat like a grommet or packing gland etc.... That's the abbreviated version.Farmwelding wrote:Wow...I guess it is too late. Must be spring fever
Here's my question-what is this heat paste? Does it reduce heat input or what?
Re: Heat Paste
Posted: Fri May 26, 2017 6:57 pm
Lol you said Packing Gland!
you said Packing Gland!Re: Heat Paste
Posted: Fri May 26, 2017 7:17 pm
I want him to work on his GoogleFu.Poland308 wrote:Lol
Re: Heat Paste
Posted: Fri May 26, 2017 7:25 pm
Well, if he's using Microsoft IE I suggest that you first go into InPrivate Browsing mode so there won't be a history of visited websites...er um at least I think I read that somewhere, on the internet, maybe.exnailpounder wrote:I want him to work on his GoogleFu.Poland308 wrote:Lol
Re: Heat Paste
Posted: Fri May 26, 2017 7:44 pm
Google sees all
Re: Heat Paste
Posted: Fri May 26, 2017 9:23 pm
"Packing Gland" is redundant.
Packing and gland are synonyms.
Steve
Packing and gland are synonyms.
Steve
Re: Heat Paste
Posted: Fri May 26, 2017 9:31 pm
Unless Packing is an action and not a thing.
Re: Heat Paste
Posted: Fri May 26, 2017 9:45 pm
Re: Heat Paste
Posted: Fri May 26, 2017 11:35 pm
Just catching up here on some thread diversions...
Re: Heat Paste
Posted: Sat May 27, 2017 7:26 am
These guys are amateur jackers....you gotta go waaaaayyyyy left of center to de-rail ....but you already knew that didn't you electrode?
Re: Heat Paste
Posted: Sat May 27, 2017 10:22 am
I learned everything about thread jacking from you.exnailpounder wrote:These guys are amateur jackers....you gotta go waaaaayyyyy left of center to de-rail ....but you already knew that didn't you electrode?
You are the master. And your apprentice Farm Boy is learning fast!Re: Heat Paste
Posted: Sat May 27, 2017 4:51 pm
You're so full of shitelectrode wrote:I learned everything about thread jacking from you.exnailpounder wrote:These guys are amateur jackers....you gotta go waaaaayyyyy left of center to de-rail ....but you already knew that didn't you electrode?
Re: Heat Paste
Posted: Sun May 28, 2017 9:49 am
I was...until a few minutes ago.exnailpounder wrote:You're so full of shitelectrode wrote:I learned everything about thread jacking from you.exnailpounder wrote:These guys are amateur jackers....you gotta go waaaaayyyyy left of center to de-rail ....but you already knew that didn't you electrode?
Re: Heat Paste
Posted: Sun May 28, 2017 10:43 am
Thanks for the 411 there buddy Here goes a thread in an entirely new territory
Here goes a thread in an entirely new territory Re: Heat Paste
Posted: Sun May 28, 2017 11:44 am
it's like it's come full circle, from heat paste to s--t waste, is there an application here?exnailpounder wrote:Thanks for the 411 there buddy