It is currently Thu Aug 17, 2017 5:24 pm Advanced search

Advice Please

General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.

Advice Please

Postby Tx1afan » Mon Jul 31, 2017 4:48 pm

Howdy guys and thanks for all the great info on the site!!

I am retired and in my late 50's. I live in a very small community in Texas. There aren't any welders in this area that can do small jobs i.e. Gate repairs, BBQ pit repairs, etc etc. I am considering opening a small shop and doing some of these jobs to try and keep busy as well as maybe make a couple more dollars here and there. I do own a small Hobart gas powered machine with an oxy/acet torch on a small 10ft trailer that I have used to do odd jobs and repairs around my place for several years. I have never had any formal training or possessed any certificates for welding. My father and grandfather were water well drillers for many years and I learned what knowledge I do have from them while I was growing up.

My question is, what would be the minimum requirements I would need to open this potential shop? As well what would you guys suggest as far as maybe carrying liability insurance and or being bonded?

Thank you in advance for your responses.
Tx1afan
New Member
 
Posts: 3
Joined: Mon Jul 31, 2017 4:24 pm

Re: Advice Please

Postby Otto Nobedder » Wed Aug 02, 2017 7:44 pm

Welcome!

I'm going to copy this into "general shop talk", where a lot more people will see it. There will be some great advice, and several links to previous similar topics for you to read through.

Steve
User avatar
Otto Nobedder
Weldmonger
 
Posts: 8362
Joined: Thu Jan 06, 2011 11:40 pm
Location: Near New Orleans

Re: Advice Please

Postby Mike » Thu Aug 03, 2017 8:28 am

Welcome...
M J Mauer Andover, Ohio

Linoln A/C 225
Everlast PA 200
Mike
Weldmonger
 
Posts: 1897
Joined: Mon Dec 06, 2010 1:09 pm
Location: Andover, Ohio

Re: Advice Please

Postby Tx1afan » Fri Aug 11, 2017 6:31 pm

Nobody?

Maybe someone would rather suggest the best place for me to go to get advice?

Thank you.
Tx1afan
New Member
 
Posts: 3
Joined: Mon Jul 31, 2017 4:24 pm

Re: Advice Please

Postby dgapilot » Fri Aug 11, 2017 7:35 pm

The question of insurance for a small business is always a hot button topic. Two things drive insurance. First, will your customers require it? Second, how risk averse are you and what do you have in asserts that can be attached? I've run an aircraft repair business for almost 40 years on a part time basis with no insurance. The premium for product liability for what I do would exceed my gross receipts. So in my case it's accept the risk or close the business.

You may be able to control some of your liability by forming a corporation and do all the work in the corporate name. If you are risk averse, check with a lawyer. You should also check with your county to see if you need a business license, and the state to see if you need to collect sales tax.


Sent from my iPhone using Tapatalk
David

Everlast 210 EXT
Lincoln AC225
Lotos LTP5000D
Oxy-Acetylene
dgapilot
Workhorse
 
Posts: 50
Joined: Wed Jul 26, 2017 7:00 pm


Return to Welding Forum General Shop Talk