livingstone
your bottom pic looks like the guy that played
Pablo Escobar in Narcos series...
craig
General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
- C. Livingstone
-
Guide
-
Posts:
-
Joined:Sat Dec 03, 2016 9:22 am
Hey,
Thanks for that, Craig, maybe I'll check it out sometime. And that photo was taken real close to narco-trafficking territory, in an area called Willcox-AZ, that's a surprisingly fertile valley with a good water table, which is what I was doing there, building a double-barreled steam faking mill. That pictured sight glass is actually a Pyrex pie pan from Walmart.
Otherwise, I'm currently starting to run through the first season of the series, The OA, as I've liked nearly all things Brit Marling since she co-wrote and stared in Another Earth. I've been diggin' the new Westworld series, with Evan Rachel Wood too. The second season of Scream Queens has been ridiculously funny too.
I've been watching a lot of new movies and cable series for free on the internet via 123movies.is and newepisodes.me.
Thanks for that, Craig, maybe I'll check it out sometime. And that photo was taken real close to narco-trafficking territory, in an area called Willcox-AZ, that's a surprisingly fertile valley with a good water table, which is what I was doing there, building a double-barreled steam faking mill. That pictured sight glass is actually a Pyrex pie pan from Walmart.
Otherwise, I'm currently starting to run through the first season of the series, The OA, as I've liked nearly all things Brit Marling since she co-wrote and stared in Another Earth. I've been diggin' the new Westworld series, with Evan Rachel Wood too. The second season of Scream Queens has been ridiculously funny too.
I've been watching a lot of new movies and cable series for free on the internet via 123movies.is and newepisodes.me.
Peace be with you all,
Christian Livingstone
www.youtube.com/newjerusalemtimes
Everlast AC/DC 210EXT (2015)
CAT250D DC-TIG/Plasma Combo
Christian Livingstone
www.youtube.com/newjerusalemtimes
Everlast AC/DC 210EXT (2015)
CAT250D DC-TIG/Plasma Combo
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
In Cairns at the moment. Will fly to Melbourne at Jan 3 and spend some weeks on wife's grandparents farm.[/quote]
Where abouts in Victoria? Im in Bendigo, in the North Central region of the state.
Where abouts in Victoria? Im in Bendigo, in the North Central region of the state.
I know where Bendigo are Mike, been there too.
Base will be in Ballarat area but will do a fair bit of trips.
Base will be in Ballarat area but will do a fair bit of trips.
Pictures from my scrap collection:
http://forum.weldingtipsandtricks.com/v ... f=9&t=5677
http://forum.weldingtipsandtricks.com/v ... f=9&t=5677
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
Figured I might as well join in, had to hunt for a picture without my hood on though
I am at work, trusty Dynasty in the background.
I am at work, trusty Dynasty in the background.
- Attachments
-
- Untitled.png (696.33 KiB) Viewed 2742 times
if there's a welder, there's a way
How come there's a Danish flag on that hood?
Pictures from my scrap collection:
http://forum.weldingtipsandtricks.com/v ... f=9&t=5677
http://forum.weldingtipsandtricks.com/v ... f=9&t=5677
Jim FLinchbaugh
- Jim FLinchbaugh
-
Workhorse
-
Posts:
-
Joined:Thu Sep 01, 2016 11:56 pm
-
Location:Kalispell Montana
OK, I'll play
My last big project
ground up build and photography by me
I'm the little guy on the right lol
My last big project
ground up build and photography by me
I'm the little guy on the right lol
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
NIce work Jim! God I would love to do that kind of stuff.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
I saw that too. He's just a pup Meant that in a good way.AndersK wrote:How come there's a Danish flag on that hood?
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Because I am DanishAndersK wrote:How come there's a Danish flag on that hood?
Moved to the US a couple of years ago.
Nail, Sure is, I started welding when I was 17, 3 years ago
Hopefully in 20 years, I will be welding as good as some of the guys here.
if there's a welder, there's a way
Small world isn't it
So you moved away from long dark cold winters for sunny Florida, you fool
So you moved away from long dark cold winters for sunny Florida, you fool
Pictures from my scrap collection:
http://forum.weldingtipsandtricks.com/v ... f=9&t=5677
http://forum.weldingtipsandtricks.com/v ... f=9&t=5677
I know, I had the same thought when I saw you were the neighborAndersK wrote:Small world isn't it
So you moved away from long dark cold winters for sunny Florida, you fool
Got a Danish co worker over here who ordered danish stickers for some reason and he gave me one, just happened to fit perfectly on my hood
Ya know, I really miss the danish weather, I can't imagine what its like to weld in freezing weather but I can imagine it being better than welding in a hot shower
if there's a welder, there's a way
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Florida is nice but the summers are brutal. Even where I am at it sometimes gets too hot to work in the shop.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
OH man,exnailpounder wrote:Florida is nice but the summers are brutal. Even where I am at it sometimes gets too hot to work in the shop.
ITs gross, I am lucky to work in an air conditioned building.
Had to weld a bunch of aluminum at one of our buildings with no A/C, in the summer..... I was drenched in sweat.
Horrible.....
if there's a welder, there's a way
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
You are lucky to have air...nothing like sweating like a pig and having damp gloves and getting zapped when you hit the pedal. There has got to be a better way to make a living but I still love what I do.Olivero wrote:OH man,exnailpounder wrote:Florida is nice but the summers are brutal. Even where I am at it sometimes gets too hot to work in the shop.
ITs gross, I am lucky to work in an air conditioned building.
Had to weld a bunch of aluminum at one of our buildings with no A/C, in the summer..... I was drenched in sweat.
Horrible.....
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
exnailpounder wrote:You are lucky to have air...nothing like sweating like a pig and having damp gloves and getting zapped when you hit the pedal. There has got to be a better way to make a living but I still love what I do.Olivero wrote:OH man,exnailpounder wrote:Florida is nice but the summers are brutal. Even where I am at it sometimes gets too hot to work in the shop.
ITs gross, I am lucky to work in an air conditioned building.
Had to weld a bunch of aluminum at one of our buildings with no A/C, in the summer..... I was drenched in sweat.
Horrible.....
Haha, I feel you there! Had to do a floor inside a fridge, welding aluminum diamond plate Tigged the whole thing, was sweating since the cold air was off and it just got toastier and toastier, started sweating and getting zapped through my knees
Its funny what we put ourselves through and yet, stick to the bussiness. Something magical about it, hard to put your finger on it.
Like today, handed over a custom made surprise cart to a customer, him being the baker, his boss asked me to make him a cart for his bread slicer as it would shake the table it was on really bad. Made it it all out of stainless, really nice and she tied a bow on it and rolled it over to him today. Love to see the smile on people's face when you solve a problem for them.
That's probably why we are still in the bussiness
Oh, and because welding is badass, that's definetley a plus point.
if there's a welder, there's a way
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
I got bored and went through the whole thing and holy hell. I could stop laughing. So read it and maybe post if you want
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
We didn't call this "The Rogues' Gallery" because the name sounded stylish...Farmwelding wrote:I got bored and went through the whole thing and holy hell. I could stop laughing. So read it and maybe post if you want
Steve S
Here in sunny Arizona it's more of a dry heat lol, that is until ya spend the day welding new fins in a mixer drum. Definitely get some sweating action going on then. Someday maybe I'll get the chance to visit some of these other states and see what all the fuss is about.
Cheers
-EB
Cheers
-EB
We are not lawyers nor physicians, but welders do it in all positions!
Miller Dynasty 280DX
Lincoln 210 MP
Miller 625 X-Treme
Hobart Handler 150
Victor Oxygen-acetylene torch
Miller/Lincoln Big 40-SA200 hybrid
Miller Dynasty 280DX
Lincoln 210 MP
Miller 625 X-Treme
Hobart Handler 150
Victor Oxygen-acetylene torch
Miller/Lincoln Big 40-SA200 hybrid
Bill Beauregard
- Bill Beauregard
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 9:32 pm
-
Location:Green Mountains of Vermont
You ain't beautiful either.Farmwelding wrote:I got bored and went through the whole thing and holy hell. I could stop laughing. So read it and maybe post if you want
God gave to each of us just what he was willing, September 13 1956 he must have been in a bad mood. Maybe genetics played a part in my appearance. Father's mother was the 2nd ugliest woman on the planet. She had an identical twin so contorted by pain she was worse. My mother was #3. All that considered I'm devastatingly handsome, or at least better than expected.
God be with us all.
Willie
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
Oh... I wasn't judging the looks I was just commenting on the conversation. You get about half way through and they start talking about dinosaurs and other weird crap. Hell I don't care what you look like. You can't change that and why should you. If someone can't accept they way you look, screw them. Sorry I hope that clears that up. I only care about your attitude and personality. That's why I don't like people. I can't stand their attitude or personality. And most on here I can get along with since we all have a work ethic and an attitude that gets the job done.Bill Beauregard wrote:You ain't beautiful either.Farmwelding wrote:I got bored and went through the whole thing and holy hell. I could stop laughing. So read it and maybe post if you want
God gave to each of us just what he was willing, September 13 1956 he must have been in a bad mood. Maybe genetics played a part in my appearance. Father's mother was the 2nd ugliest woman on the planet. She had an identical twin so contorted by pain she was worse. My mother was #3. All that considered I'm devastatingly handsome, or at least better than expected.
God be with us all.
Willie
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
- LtBadd
-
Weldmonger
-
Posts:
-
Joined:Sun Apr 12, 2015 4:00 pm
-
Location:Clearwater FL
-
Contact:
Thanks.LtBadd wrote:Hey Warrenh, welcome aboard.Warrenh wrote:I'm new here but I will say working near the gulf of Mexico has its benefits. Lol. 27 inch redfin being one.
Sent from my SCH-I545 using Tapatalk
Sent from my SCH-I545 using Tapatalk
Return to “Welding Forum General Shop Talk”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities