Jonathan, I can't pin a post either, but I'm more than happy to bump this topic to the top until Joseph gets to it and pins this for you.
Steve S
General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
- maker of things
-
Guide
-
Posts:
-
Joined:Tue Jul 19, 2016 6:52 am
Subscribed.
-Jon
I learned how to weld at night, but not last night. (despite how my weld looks)
Lincoln Viking 3350 K3034-2&3
Dynasty 210DX w/cps and coolmate3
Lincoln Power Mig 180c
hermit.shed on instagram
I learned how to weld at night, but not last night. (despite how my weld looks)
Lincoln Viking 3350 K3034-2&3
Dynasty 210DX w/cps and coolmate3
Lincoln Power Mig 180c
hermit.shed on instagram
John Chamorro
- John Chamorro
-
Guide
-
Posts:
-
Joined:Thu Mar 19, 2015 9:44 am
-
Location:San Antonio Valley Peoples Republic of Californy
I have a dumb question,,,, what is a pod cast? I have a pc and almost know how to turn it on and off.
I don't know it all but I'm working on it.
noddybrian
- noddybrian
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 12:13 pm
- maker of things
-
Guide
-
Posts:
-
Joined:Tue Jul 19, 2016 6:52 am
If you are seriously asking (hard to tell on the internet) It's basically a radio show that you can download and listen to. You can listen to it on your pc. In this case the format is kinda like 3-4 guys sitting around having coffee and talking shop.
-Jon
I learned how to weld at night, but not last night. (despite how my weld looks)
Lincoln Viking 3350 K3034-2&3
Dynasty 210DX w/cps and coolmate3
Lincoln Power Mig 180c
hermit.shed on instagram
I learned how to weld at night, but not last night. (despite how my weld looks)
Lincoln Viking 3350 K3034-2&3
Dynasty 210DX w/cps and coolmate3
Lincoln Power Mig 180c
hermit.shed on instagram
John Chamorro
- John Chamorro
-
Guide
-
Posts:
-
Joined:Thu Mar 19, 2015 9:44 am
-
Location:San Antonio Valley Peoples Republic of Californy
Yep I was serious.maker of things wrote:If you are seriously asking (hard to tell on the internet) It's basically a radio show that you can download and listen to. You can listen to it on your pc. In this case the format is kinda like 3-4 guys sitting around having coffee and talking shop.
I don't know it all but I'm working on it.
- maker of things
-
Guide
-
Posts:
-
Joined:Tue Jul 19, 2016 6:52 am
I would really encourage everyone here to check this podcast out. If you are like me and are on android. I have had really good luck with Beyondpod https://play.google.com/store/apps/deta ... dpod&hl=en they have a free version and a paid version.
I really like the one about taking/giving weld tests.
I really like the one about taking/giving weld tests.
-Jon
I learned how to weld at night, but not last night. (despite how my weld looks)
Lincoln Viking 3350 K3034-2&3
Dynasty 210DX w/cps and coolmate3
Lincoln Power Mig 180c
hermit.shed on instagram
I learned how to weld at night, but not last night. (despite how my weld looks)
Lincoln Viking 3350 K3034-2&3
Dynasty 210DX w/cps and coolmate3
Lincoln Power Mig 180c
hermit.shed on instagram
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
Update on the Welding Tips & Tricks Podcast. Starting Monday 8/22/2016 we will now air on a weekly basis. The plan is to stay on a every Monday release. We really appreciate all those who have downloaded each episode and have shared their thoughts. The feedback for the podcast has been great.
Jonathan
Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
John Chamorro
- John Chamorro
-
Guide
-
Posts:
-
Joined:Thu Mar 19, 2015 9:44 am
-
Location:San Antonio Valley Peoples Republic of Californy
I still don't know how to get there. Is there a link to follow?Superiorwelding wrote:Update on the Welding Tips & Tricks Podcast. Starting Monday 8/22/2016 we will now air on a weekly basis. The plan is to stay on a every Monday release. We really appreciate all those who have downloaded each episode and have shared their thoughts. The feedback for the podcast has been great.
Jonathan
I don't know it all but I'm working on it.
- LtBadd
-
Weldmonger
-
Posts:
-
Joined:Sun Apr 12, 2015 4:00 pm
-
Location:Clearwater FL
-
Contact:
John, it's in the first post of this thread.John Chamorro wrote:I still don't know how to get there. Is there a link to follow?Superiorwelding wrote:Update on the Welding Tips & Tricks Podcast. Starting Monday 8/22/2016 we will now air on a weekly basis. The plan is to stay on a every Monday release. We really appreciate all those who have downloaded each episode and have shared their thoughts. The feedback for the podcast has been great.
Jonathan
Richard
Website
Website
- maker of things
-
Guide
-
Posts:
-
Joined:Tue Jul 19, 2016 6:52 am
Nice! Looking forward to all of them. Still going to have guests on alternating shows?
-Jon
I learned how to weld at night, but not last night. (despite how my weld looks)
Lincoln Viking 3350 K3034-2&3
Dynasty 210DX w/cps and coolmate3
Lincoln Power Mig 180c
hermit.shed on instagram
I learned how to weld at night, but not last night. (despite how my weld looks)
Lincoln Viking 3350 K3034-2&3
Dynasty 210DX w/cps and coolmate3
Lincoln Power Mig 180c
hermit.shed on instagram
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
Jon,
I hope you and the rest of the welding community enjoy the podcasts. Yes, we still are holding a guest interview every other podcast. That might change according to what we have going on but interviews will always be there. The interviews have the most hits on them as far as downloads so our audience obviously finds those the most interesting.
I will continue to update here as needed and try to answer questions.
Jonathan
I hope you and the rest of the welding community enjoy the podcasts. Yes, we still are holding a guest interview every other podcast. That might change according to what we have going on but interviews will always be there. The interviews have the most hits on them as far as downloads so our audience obviously finds those the most interesting.
I will continue to update here as needed and try to answer questions.
Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
- maker of things
-
Guide
-
Posts:
-
Joined:Tue Jul 19, 2016 6:52 am
Thanks Jonathan. at least now we have some reason to look forward to Mondays. Liked your welding like robin hood vid too.
-Jon
I learned how to weld at night, but not last night. (despite how my weld looks)
Lincoln Viking 3350 K3034-2&3
Dynasty 210DX w/cps and coolmate3
Lincoln Power Mig 180c
hermit.shed on instagram
I learned how to weld at night, but not last night. (despite how my weld looks)
Lincoln Viking 3350 K3034-2&3
Dynasty 210DX w/cps and coolmate3
Lincoln Power Mig 180c
hermit.shed on instagram
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
Episode 6 of the Welding Tips & Tricks Podcast "Pricing Jobs" is now live. This was probably the most fun topic to record with Jody and Roy. Pricing jobs is always nerve racking when starting out, and still is for me at times. If you haven't listened to any of the podcasts yet give episode 6 a listen. In my opinion it is the best so far.
http://wttpodcast.libsyn.com/
Jonathan
http://wttpodcast.libsyn.com/
Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
- maker of things
-
Guide
-
Posts:
-
Joined:Tue Jul 19, 2016 6:52 am
Another good one. Would be fun if you guys each came up with a sign off phrase. -Keep your tungsten sharp.
-Jon
I learned how to weld at night, but not last night. (despite how my weld looks)
Lincoln Viking 3350 K3034-2&3
Dynasty 210DX w/cps and coolmate3
Lincoln Power Mig 180c
hermit.shed on instagram
I learned how to weld at night, but not last night. (despite how my weld looks)
Lincoln Viking 3350 K3034-2&3
Dynasty 210DX w/cps and coolmate3
Lincoln Power Mig 180c
hermit.shed on instagram
- LtBadd
-
Weldmonger
-
Posts:
-
Joined:Sun Apr 12, 2015 4:00 pm
-
Location:Clearwater FL
-
Contact:
I just binge-listened to 1-6. Great work, guys!! The one about pricing out jobs was very very helpful for me. I want to get into my own side work soon, and eventually my own company full time. But had no clue where to start. Now I feel much more confident in stepping that direction!
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
Weldakota,
I am glad that helped. That was one of the most unknown topics to me when I started. I had no idea how to price or quote jobs. Learned through experience I have gained so far and the help of good friends.
On another note, episode 7 went live today. We interviewed Joel Buschmann of Overkill Racing and Chassis, or @overkillracingandchassis on Instagram. If you want an interesting back story on how someone got into welding, and in this case building Monster Trucks, I highly recommend giving episode 7 a listen.
Jonathan
I am glad that helped. That was one of the most unknown topics to me when I started. I had no idea how to price or quote jobs. Learned through experience I have gained so far and the help of good friends.
On another note, episode 7 went live today. We interviewed Joel Buschmann of Overkill Racing and Chassis, or @overkillracingandchassis on Instagram. If you want an interesting back story on how someone got into welding, and in this case building Monster Trucks, I highly recommend giving episode 7 a listen.
Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
- maker of things
-
Guide
-
Posts:
-
Joined:Tue Jul 19, 2016 6:52 am
Missed you on #7 Jonathan. Thanks for being on the podcast Joel.
I really like when you guys talk about practical real world scenarios. Like the fact that if you lawn dart a 10,000# truck, something is going to break. I bet some people could argue that tig welding the DOM would make a "better" weld but ultimately, as Jody pointed out, some material is likely going to fail first. Probably slightly misquoting Jody again "if they made airplanes so they wouldn't crack, they would never get off the ground".
Keep it up gang!
I really like when you guys talk about practical real world scenarios. Like the fact that if you lawn dart a 10,000# truck, something is going to break. I bet some people could argue that tig welding the DOM would make a "better" weld but ultimately, as Jody pointed out, some material is likely going to fail first. Probably slightly misquoting Jody again "if they made airplanes so they wouldn't crack, they would never get off the ground".
Keep it up gang!
-Jon
I learned how to weld at night, but not last night. (despite how my weld looks)
Lincoln Viking 3350 K3034-2&3
Dynasty 210DX w/cps and coolmate3
Lincoln Power Mig 180c
hermit.shed on instagram
I learned how to weld at night, but not last night. (despite how my weld looks)
Lincoln Viking 3350 K3034-2&3
Dynasty 210DX w/cps and coolmate3
Lincoln Power Mig 180c
hermit.shed on instagram
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Seems quiet.
I've been catching up a bit and enjoying every episode.
I'm surprised there are not more comments here.
Steve S
I've been catching up a bit and enjoying every episode.
I'm surprised there are not more comments here.
Steve S
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
- AKweldshop
-
Weldmonger
-
Posts:
-
Joined:Wed Oct 23, 2013 3:30 pm
-
Location:Palmer AK
Great stuff.
Issac is one bad man
Issac is one bad man
Just a couple welders and a couple of big hammers and torches.
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
- maker of things
-
Guide
-
Posts:
-
Joined:Tue Jul 19, 2016 6:52 am
Thanks for being on the show Zank (episode #13).
-Jon
I learned how to weld at night, but not last night. (despite how my weld looks)
Lincoln Viking 3350 K3034-2&3
Dynasty 210DX w/cps and coolmate3
Lincoln Power Mig 180c
hermit.shed on instagram
I learned how to weld at night, but not last night. (despite how my weld looks)
Lincoln Viking 3350 K3034-2&3
Dynasty 210DX w/cps and coolmate3
Lincoln Power Mig 180c
hermit.shed on instagram
Started listening to Steve's episode today. Definitely some interesting stuff.Otto Nobedder wrote:Seems quiet.
I've been catching up a bit and enjoying every episode.
I'm surprised there are not more comments here.
Steve S
Sent from my iPhone using Tapatalk
Return to “Welding Forum General Shop Talk”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities