It is currently Fri Jun 23, 2017 2:56 pm Advanced search

Mig vs TIG on Aluminum

Comments & questions on new & past videos

Mig vs TIG on Aluminum

Postby admin » Wed May 17, 2017 2:44 pm

User avatar
Posts: 390
Joined: Mon Jun 01, 2009 8:54 am
Location: Atlanta, GA

Re: Mig vs TIG on Aluminum

Postby weldin mike 27 » Fri Jun 23, 2017 9:28 am

This isn't about this video, but for the latest one with stick v flux core overhead. Do you think that was a lamination in the plate when Jody etched it? He didn't mention it, although maybe he didn't want to distract from the video
User avatar
weldin mike 27
Posts: 3287
Joined: Fri Apr 01, 2011 10:59 pm
Location: Australia; Victoria

Re: Mig vs TIG on Aluminum

Postby Artie F. Emm » Fri Jun 23, 2017 10:12 am

The cut and etch segment starts at about 2:07 ... flux-core/

At first I thought you were talking about the fit-up gap on the 3:00 member... didn't notice possible delam until you mentioned it. How does that happen, a flaw in the rolling process?
cutnetch.jpg (27.5 KiB) Viewed 8 times
aka "RTFM"
Artie F. Emm
Posts: 554
Joined: Thu Jul 24, 2014 7:53 am

Return to Video Discussion