It is currently Sun May 28, 2017 4:32 am Advanced search

Jody's video for this week.

Comments & questions on new & past videos

Jody's video for this week.

Postby Otto Nobedder » Tue Sep 20, 2016 8:01 pm

Interestingly, Jody's weekly video has not appeared here, so I'm sharing a link to it now:

http://www.weldingtipsandtricks.com/cas ... lding.html

Steve S

thanks Steve, I am falling behind ,

Jody
User avatar
Otto Nobedder
Weldmonger
 
Posts: 8273
Joined: Thu Jan 06, 2011 11:40 pm
Location: Near New Orleans

Re: Jody's video for this week.

Postby kblenker#22 » Tue Sep 20, 2016 10:01 pm

maybe i missed it did he say what kind of filler he was using?
kblenker#22
Active Member
 
Posts: 43
Joined: Tue Jul 15, 2014 9:23 pm
Location: Amherst, Wi

Re: Jody's video for this week.

Postby MosquitoMoto » Wed Sep 21, 2016 12:42 am

kblenker#22 wrote:maybe i missed it did he say what kind of filler he was using?


My question, too.

We have an active thread on the boards at the moment where there is some discussion of a cast pump casing that needs to be welded and which filler to use...would be handy to know which filler Jody and JD used on this job - and why.



Kym
User avatar
MosquitoMoto
Weldmonger
 
Posts: 1196
Joined: Sat Aug 01, 2015 8:38 am
Location: The Land Down Under

Re: Jody's video for this week.

Postby Coldman » Wed Sep 21, 2016 1:13 am

He does say in the write up. 4047
Flat out like a lizard drinkin'
Coldman
Weldmonger
 
Posts: 982
Joined: Mon Dec 15, 2014 2:16 am
Location: Oz

Re: Jody's video for this week.

Postby MosquitoMoto » Wed Sep 21, 2016 3:20 am

Coldman wrote:He does say in the write up. 4047



Reading? You want me to READ now? :lol:



Kym
User avatar
MosquitoMoto
Weldmonger
 
Posts: 1196
Joined: Sat Aug 01, 2015 8:38 am
Location: The Land Down Under

Re: Jody's video for this week.

Postby Coldman » Wed Sep 21, 2016 3:33 am

Nope, that's why I gave you the numbers. It's happy hour.
Flat out like a lizard drinkin'
Coldman
Weldmonger
 
Posts: 982
Joined: Mon Dec 15, 2014 2:16 am
Location: Oz

Re: Jody's video for this week.

Postby Otto Nobedder » Wed Sep 21, 2016 5:58 pm

By the way, if anyone is interested in discussing dye-penetrant NDE, I've accumulated a lot of experience with visible dyes like Jody used, including in ASME code applications, and have more time to discuss it than he does.

Steve S
User avatar
Otto Nobedder
Weldmonger
 
Posts: 8273
Joined: Thu Jan 06, 2011 11:40 pm
Location: Near New Orleans

Re: Jody's video for this week.

Postby Poland308 » Wed Sep 21, 2016 8:14 pm

I've used it a lot but maybe a thread just about use of it would be a good idea. It's an Awsome way to track cracks.
I have more questions than answers

Josh
Poland308
Weldmonger
 
Posts: 1937
Joined: Thu Sep 10, 2015 8:45 pm
Location: Iowa

Re: Jody's video for this week.

Postby MinnesotaDave » Wed Sep 21, 2016 9:14 pm

I found the dye check very interesting as well.

About a month ago I did a cracked Chevy truck bell housing.

Basically did just like Jody just showed about amps, slow puddling, stop drill, cleaning action, etc - except I've never dye checked anything and thought that was an AWESOME tip. :)
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Airco 300 - Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
User avatar
MinnesotaDave
Weldmonger
 
Posts: 1422
Joined: Sun Oct 27, 2013 10:57 pm
Location: Bemidji MN, U.S.A.

Re: Jody's video for this week.

Postby dirtmidget33 » Fri Sep 23, 2016 9:35 am

Otto Nobedder wrote:By the way, if anyone is interested in discussing dye-penetrant NDE, I've accumulated a lot of experience with visible dyes like Jody used, including in ASME code applications, and have more time to discuss it than he does.

Steve S


Steve I got a question for you then, is there really any noticeable difference in the standard kit vs the nuclear kit that dynaflux makes.
why use standard nozzles after gas lens where invented. Kinda of like starting fires by rubbing sticks together.
dirtmidget33
Heavy Hitter
 
Posts: 452
Joined: Tue May 13, 2014 5:22 pm

Next

Return to Video Discussion