It is currently Tue Sep 19, 2017 7:46 am Advanced search

Very good beginner instruction for ARC stick IMO

Comments & questions on new & past videos

Very good beginner instruction for ARC stick IMO

Postby bruce991 » Sat Feb 25, 2017 11:41 am

Although many years old and a bit long and classroom like, I found this video very helpful especially the frozen visual shots of the puddle changes with arc length and rod angle and the different movement required for different rod types. Not to knock any of Jody's videos but I found this informative as heck. https://www.youtube.com/watch?v=DIf_l8l5BkY
bruce991
Guide
 
Posts: 141
Joined: Tue Jan 05, 2016 10:31 pm
Location: Central Michigan

Re: Very good beginner instruction for ARC stick IMO

Postby MinnesotaDave » Sat Feb 25, 2017 2:17 pm

Yep, Steve Bleile is very good. I use some of his clips as well as Jody's in the classroom.
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Airco 300 - Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
User avatar
MinnesotaDave
Weldmonger
 
Posts: 1537
Joined: Sun Oct 27, 2013 10:57 pm
Location: Bemidji MN, U.S.A.

Re: Very good beginner instruction for ARC stick IMO

Postby Louie1961 » Wed Mar 01, 2017 10:55 am

Steve Bleile is very good, but youtube does him a disservice. Anytime you see his videos on the interwebs, it is a pirated video, and really is illegal. He sells the videos on DVD and they really aren't that expensive. If you like his work, you should pony up for the the DVD. http://www.weldingvideos.com/
Hobart Handler 190
Syncrowave 250
Purox Metalmaster
User avatar
Louie1961
Ace
 
Posts: 228
Joined: Wed Jan 22, 2014 12:00 am
Location: Connecticut


Return to Video Discussion