It is currently Sat Feb 17, 2018 9:34 pm Advanced search

Metabo 6" grinder. What model?

Comments & questions on new & past videos

Metabo 6" grinder. What model?

Postby Jetman » Sat Dec 09, 2017 10:02 am

Saw the Video of using the grinder to cut big steel beams.
Was wondering what model they were using? Looks like they have several 6" models
New Member
Posts: 5
Joined: Sun Aug 14, 2016 3:22 pm

Re: Metabo 6" grinder. What model?

Postby LtBadd » Sun Dec 10, 2017 10:36 am

Are you referring to the video with JD Brewer using the grinder? If so you may be able to contact him directly concerning your question.

Insert witty, sarcastic, or philosophical remark here.
User avatar
Posts: 1510
Joined: Sun Apr 12, 2015 4:00 pm
Location: Clearwater FL

Re: Metabo 6" grinder. What model?

Postby Arclight Ironworks » Sun Dec 10, 2017 11:06 am

@ Jetman - 90% of our grinders are corded Metabos in 4-1/2" and 6". Strong as steel and smooth as ice.

Recommend the 13.5A, paddle switched, quick-change WEP 15-150. The paddled operation is ideal for safe, shorter duration work, a la with .045" Slicer wheels.

If you are planning to "grind" (hard bonded abrasives, flapper) for surface preparation/finish work, Then you should consider the model with the Slider switch. Running a Paddle switched grinder for extended durations will definitely increase your finger/foreman strength, but is less than ideal for extended durations IMPO.

Look online for pre-owned and refurbished models.
Purpose, then passion; practitionership and practicality. Patience. Obsession and hard work. That's the discipline.
User avatar
Arclight Ironworks
Posts: 52
Joined: Tue Apr 11, 2017 10:31 pm

Re: Metabo 6" grinder. What model?

Postby CHCWeldingLLC » Tue Jan 30, 2018 9:01 am

Everything arclight said is true, but you could also try to search a WEP-14-150, it’s the older model. Again arclight is right the metabo super slicer the one the best cut off wheels but try out a CGW quickie, best cut and durability for the money.
6546E7F0-A540-4261-9CB3-5503F46C6612.jpeg (52.14 KiB) Viewed 243 times
CHC Welding
New Member
Posts: 6
Joined: Mon Oct 14, 2013 10:44 am

Return to Video Discussion