Comments & questions on new & past videos
- winky
-
Active Member
-
Posts:
-
Joined:Wed May 30, 2012 10:07 am
-
Location:Oregon
-
Contact:
Do you think there will ever be an end to the Helium shortage? We are talking about an aliment the universally in high abundance throughout the cosmos.
... going as fast as I can with one eye closed.
Everlast Powertig 200DX
Miller Thunderbolt 225
Lincoln 180c Mig
Hobart Handler 125
Everlast Powertig 200DX
Miller Thunderbolt 225
Lincoln 180c Mig
Hobart Handler 125
Not while it's making the Suppliers $$$$.winky wrote:Do you think there will ever be an end to the Helium shortage? We are talking about an aliment the universally in high abundance throughout the cosmos.
http://www.nature.com/news/united-state ... ve-1.13819
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
No shortage of Helium in my shop.
If the bottles we need to send for recertification aren't empty, we dump them to atmosphere.
In the (very) rare case we're short on Helium, we send someone to the source, and get it for free.
Steve S
If the bottles we need to send for recertification aren't empty, we dump them to atmosphere.
In the (very) rare case we're short on Helium, we send someone to the source, and get it for free.
Steve S
dirtmidget33
- dirtmidget33
-
Heavy Hitter
-
Posts:
-
Joined:Tue May 13, 2014 5:22 pm
Gonna drive my 24' trailer down to you and let you fill it full of helium bottles. That should last me and a few others a lifetime.Otto Nobedder wrote:No shortage of Helium in my shop.
If the bottles we need to send for recertification aren't empty, we dump them to atmosphere.
In the (very) rare case we're short on Helium, we send someone to the source, and get it for free.
Steve S
I currently have zero experience using helium or helium argon blends.
why use standard nozzles after gas lens where invented. Kinda of like starting fires by rubbing sticks together.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
I've done it once. I had to weld 1/4" X 2" 6061 angle to 3/8" 6061 plate at an overhead 45*, the transition between F3 and F4, and even with 310A could not get a solid clean tack with the poor fit-up. So I put together a mixer to estimate 50-50, and the difference was significant. I finished every weld on that project with 50-50, as I already had it set up, and enjoyed it immensely. Lap-welds on 1/8" looked like a machine did them.
I do wish my work allowed me to weld more aluminum, both because I enjoy it and because I'd like to experiment more.
Steve S
I do wish my work allowed me to weld more aluminum, both because I enjoy it and because I'd like to experiment more.
Steve S
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
Because of this video, and a few of his others, I am finally getting a bottle of He to play around with on GTAW. I have always wanted to see the difference in using He but my only experience with it is mixes for GMAW. Should be rather fun I think. I am workin on setting up the corner of my garage with a table dedicated to testing. I get asked quite often about different specs and tests so I thought is was about time to pull the trigger and get my little section set up.
One of the things I want to do with my helium is DC Tig Alum as I have very limited experience with the DC alum an what I do have is limited to thin gauge anyway. I have some 1/4" plate I want I play with and hopefully get some thicker members as well. I look forward to the rest of this little series!
-Jonathan
One of the things I want to do with my helium is DC Tig Alum as I have very limited experience with the DC alum an what I do have is limited to thin gauge anyway. I have some 1/4" plate I want I play with and hopefully get some thicker members as well. I look forward to the rest of this little series!
-Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
dirtmidget33
- dirtmidget33
-
Heavy Hitter
-
Posts:
-
Joined:Tue May 13, 2014 5:22 pm
Sure i would never have a use for helium but its tempting but, afraid to ask lws what tank of it would run me. prolly one of those things if I did I would take a 10yr lease on 300 series tank and maybe get it filled once so cant say I see it happening. heck got 10 yrs leases on argon think I should have got 20yr leases instead.
why use standard nozzles after gas lens where invented. Kinda of like starting fires by rubbing sticks together.
- Braehill
-
Weldmonger
-
Posts:
-
Joined:Sat Jul 06, 2013 11:16 am
-
Location:Near Pittsburgh,Pennsylvania. Steel Buckle of the Rust Belt
There's no industry standards set for balloon Helium, but in the same token when renting a cylinder of Helium from your local cylinder fill they don't ask what it's used for, so they would give you pure.
Len
Len
Now go melt something.
Instagram @lenny_gforce
Len
Instagram @lenny_gforce
Len
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities