Page 1 of 1
more on scratch start tig
Posted: Tue Feb 09, 2016 4:37 pm
by admin
http://www.weldingtipsandtricks.com/scr ... -pass.html
Some more stuff on Scratch start tig, a bit of stick welding, and a tiny inverter for both tig and stick
hope everyone is having a good week!
Jody
Re: more on scratch start tig
Posted: Tue Feb 09, 2016 6:53 pm
by rake
Jody, we always used a welding glove with the tip of the middle finger cut off to insulate the power block.
Re: more on scratch start tig
Posted: Tue Feb 09, 2016 7:02 pm
by AKweldshop
rake wrote:Jody, we always used a welding glove with the tip of the middle finger cut off to insulate the power block.
That is brilliant, rake!
Re: more on scratch start tig
Posted: Tue Feb 09, 2016 9:03 pm
by rake
AKweldshop wrote:rake wrote:Jody, we always used a welding glove with the tip of the middle finger cut off to insulate the power block.
That is brilliant, rake!
Nah, not really. Gloves were free at the shipyard! That and we needed it to be fireproof.
There was always someone carbon arc gouging and throwing molten slag on your shit!
A soda bottle wouldn't last 5 minutes in that environment!