Page 1 of 1
Making a small Argon Purge box for small parts
Posted: Thu Mar 31, 2016 1:47 pm
by admin
http://www.weldingtipsandtricks.com/purge-box.html
making a small purge box and discussing the use of chill bars and a #12 furick cup on stainless...
this was a collaboration between Roy Crumrine and me...Thanks Roy
Re: Making a small Argon Purge box for small parts
Posted: Thu Mar 31, 2016 6:32 pm
by MosquitoMoto
Great video, thanks Jody.
Always enjoy watching you and Roy weld and I really do learn something every single time.
Kym
Re: Making a small Argon Purge box for small parts
Posted: Fri Apr 01, 2016 3:06 pm
by glassTransition
Thanks for all of the videos and information Jody. This is an invaluable resource.
I hope that in part 2 you'll talk about why the chill bars weren't needed for some of the joints?
Also, something much thinner would be interesting...
Re: Making a small Argon Purge box for small parts
Posted: Fri Apr 01, 2016 9:06 pm
by rahtreelimbs
Jody.....can you provide us with the source for the sintered metal diffusers you are using on this project?
Re: Making a small Argon Purge box for small parts
Posted: Fri Apr 01, 2016 11:28 pm
by Poland308
Grainger part number 1A326
Re: Making a small Argon Purge box for small parts
Posted: Wed Apr 06, 2016 2:28 pm
by 480man
You might want to look into industrial grade ceramic beads as a media.They would provide a mostly neutral base. Another option could be the use of a small tabletop media blasting cabinet.The cabinet would allow full gas shielding and keep the gas inside with a top loader. Something like this one ATD Tools 8400 - Bench Top Blast Cabinet