It is currently Fri Jul 21, 2017 10:39 pm Advanced search

Millermatic 211 (inverter), hardly used

Welder to welder, post your welding machines, accessories and consumables or items you're looking for. Please read and follow the rules when posting.

Millermatic 211 (inverter), hardly used

Postby Oscar » Fri Dec 16, 2016 12:02 pm

Bought it Oct. 2015. Barely on my 2nd or 3rd 8" spool, so it is hardly used. Selling because I want a Multimatic 215. The drive shaft has a slight wobble, thus the drive roll wobbles. Turns out this is normal as per Miller Repair center in San Antonio, Tx. You can see it in this video from ChuckE2009, at about 11:39 into the video.
https://youtu.be/jia6eF-wDRw?t=11m30s

If you leave the factory suggested starting point of 2 on the tension, the wire would sometimes slip, usually only if you curl the gun cable too much (thats how/why I started looking for a cause). Crank it down to 3ish and it has no problems feeding the wire.

You can get it brand new for $977 after $100 Miller rebate, or get it here for $800 + shipping costs. Only for sale this month because the Rebate for the Multimatic 215 expires this month as well. :lol:
HTP Invertig 221 DV w/ Arctic Chill cooler DV.
Millermatic 211 Inverter w/ Spoolmate-150
Eastwood Versacut 40A Plasma cutter
User avatar
Oscar
Weldmonger
 
Posts: 1269
Joined: Thu Dec 26, 2013 12:41 am
Location: Laredo, Tx

Re: Millermatic 211 (inverter), hardly used

Postby Oscar » Fri Dec 16, 2016 4:02 pm

What the heck, $750 + shipping.
HTP Invertig 221 DV w/ Arctic Chill cooler DV.
Millermatic 211 Inverter w/ Spoolmate-150
Eastwood Versacut 40A Plasma cutter
User avatar
Oscar
Weldmonger
 
Posts: 1269
Joined: Thu Dec 26, 2013 12:41 am
Location: Laredo, Tx

Re: Millermatic 211 (inverter), hardly used

Postby NewCarScent » Tue May 23, 2017 2:54 pm

I know this is an old post, but you don't happen to still have this item for sale, do you?
NewCarScent
New Member
 
Posts: 2
Joined: Tue May 23, 2017 2:51 pm

Re: Millermatic 211 (inverter), hardly used

Postby Oscar » Sat Jul 01, 2017 11:26 am

Just saw this. Perhaps I could be convinced. I just used it yesterday to make a firewood rack out of old fence tubing. Works great, just gotta tighten down the tensioner a little more than "normal". Has the "motor wobble", but Miller says it's normal *shrugs shoulders*.
HTP Invertig 221 DV w/ Arctic Chill cooler DV.
Millermatic 211 Inverter w/ Spoolmate-150
Eastwood Versacut 40A Plasma cutter
User avatar
Oscar
Weldmonger
 
Posts: 1269
Joined: Thu Dec 26, 2013 12:41 am
Location: Laredo, Tx


Return to Classifieds - Buy, Sell, Trade Used Welding Equipment