Page 1 of 1
Carts
Posted: Wed Mar 08, 2017 4:57 pm
by Mihtu
- Cutter cart
- 2291.jpeg (61.8 KiB) Viewed 1192 times
Seems like welding carts,or any cart for the shop is always a good first project,so here are a couple pictures,I learned to tig on yo u tube from Jody,been playing around for about a year now,
Re: Carts
Posted: Tue Mar 14, 2017 6:50 am
by Granddaddy
I hope one day I can make aluminum tig welds that look like that.
creek
Re: Carts
Posted: Sun Mar 19, 2017 5:09 pm
by Mihtu
I've only been tig welding aluminum for a year,keep watching the videos on welding tips and tricks!
Re: Carts
Posted: Sun Mar 19, 2017 5:17 pm
by Mihtu
I realize this is the wrong area for this post but ,So master the cans,it will teach heat control,and puddle control!
Re: Carts
Posted: Sun Mar 19, 2017 6:14 pm
by Otto Nobedder
Try beer cans, instead. Six beers will increase the challenge exponentially!
Steve S
Re: Carts
Posted: Sun Mar 19, 2017 6:22 pm
by Farmwelding
Mihtu wrote:I realize this is the wrong area for this post but ,So master the cans,it will teach heat control,and puddle control!
With the diversion, what are your amps at? Might try that soon at school with our diversion. It'll be fun with 1/8" filler. Or maybe I'll take some .030 aluminum mig wire.
Re: Carts
Posted: Sun Mar 19, 2017 7:15 pm
by Mihtu
Set to 35 amps,3/32 filler and tungsten,2%lanth,and E3