Metal cutting - oxyfuel cutting, plasma cutting, machining, grinding, and other preparatory work.
- RocketSurgeon
-
Guide
-
Posts:
-
Joined:Wed Mar 11, 2015 9:13 am
-
Location:All around Lake Pontchartrain
Unfortunately, we are still working on a OT schedule and I'm in school (AWS certs) until 9pm. I haven't hade the chance to test the lower psi on my plasma.
But, it is good to see that others may have tried it and it worked for them. Maybe on my day off (after I move into the house I just bought) I'll have a chance to see myself.
But, it is good to see that others may have tried it and it worked for them. Maybe on my day off (after I move into the house I just bought) I'll have a chance to see myself.
Chris
NASA is not the enemy of the American taxpayer.
AWS D1.1, D17.1
NASA is not the enemy of the American taxpayer.
AWS D1.1, D17.1
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
- RocketSurgeon
-
Guide
-
Posts:
-
Joined:Wed Mar 11, 2015 9:13 am
-
Location:All around Lake Pontchartrain
No. We found a more fitting one in Hammond. Two sheds in the back yard (one is shop ready). Turn key made it too good to pass up.Otto Nobedder wrote:So you DID buy it? The one across from the park?
Congratulations!
Steve S
Still jumping through hoops for the purchase process.
REALLY tired from it all. School is worth it, though.
Chris
NASA is not the enemy of the American taxpayer.
AWS D1.1, D17.1
NASA is not the enemy of the American taxpayer.
AWS D1.1, D17.1
- RocketSurgeon
-
Guide
-
Posts:
-
Joined:Wed Mar 11, 2015 9:13 am
-
Location:All around Lake Pontchartrain
In the end, it seemed like more than necessary effort to buy (heh, even search for) a house closer to work than a house "right around the corner".mercado wrote:Oh, I'm sorry that you didn't manage to buy it
Go figure.
Chris
NASA is not the enemy of the American taxpayer.
AWS D1.1, D17.1
NASA is not the enemy of the American taxpayer.
AWS D1.1, D17.1
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Chris, the next time gas exceeds $4/gal, you may re-think that logic...
I doubt it, though. In IA, we were on one vehicle a while, and I had my wife driving me to, and getting me from, a 34-mile away job at a peak of $4.629/gallon in a 17MPG truck. That's 8 gallons per day for over $37 per day for gas, and we didn't care. That was less than one hour from my overtime each day to have a loft apartment in Panora, IA, overlooking the town square, next to a nice bar and a decent restaurant, with the library across the square.
Steve S
I doubt it, though. In IA, we were on one vehicle a while, and I had my wife driving me to, and getting me from, a 34-mile away job at a peak of $4.629/gallon in a 17MPG truck. That's 8 gallons per day for over $37 per day for gas, and we didn't care. That was less than one hour from my overtime each day to have a loft apartment in Panora, IA, overlooking the town square, next to a nice bar and a decent restaurant, with the library across the square.
Steve S
It depends where do you live. It's very cheap in United Emirates
In Europe it's not so bad these days. It used to be definitely worse.
Is it more expensive than in the US?
- RocketSurgeon
-
Guide
-
Posts:
-
Joined:Wed Mar 11, 2015 9:13 am
-
Location:All around Lake Pontchartrain
I live in Louisiana. 25% of all oil the U.S. produces comes from here. Gas is $2.19gal at the pump. That's 2,00Euro or 1,40Pound.
Yeah, I'm OK with that.
Yeah, I'm OK with that.
Chris
NASA is not the enemy of the American taxpayer.
AWS D1.1, D17.1
NASA is not the enemy of the American taxpayer.
AWS D1.1, D17.1
noddybrian
- noddybrian
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 12:13 pm
Reality check from the UK !
Current low octane unleaded is down considerably from earlier in the year at approx £5.21 per gallon ( $8.14 ) down from approx £6.35 per gallon ( $9.91 ).
You don't see many big blocks ! well actually you don't see many V8s - mostly nasty underpowered 4pot diesels - I still got a 460 powered F350 but sadly not used it in years - can't see a reality when I will either - the powers that be really hit the motorist hard here.
Current low octane unleaded is down considerably from earlier in the year at approx £5.21 per gallon ( $8.14 ) down from approx £6.35 per gallon ( $9.91 ).
You don't see many big blocks ! well actually you don't see many V8s - mostly nasty underpowered 4pot diesels - I still got a 460 powered F350 but sadly not used it in years - can't see a reality when I will either - the powers that be really hit the motorist hard here.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Gasoline in Kuwait was under $0.25 USD, last time I bothered to look...
It's all about perspective.
Steve S
It's all about perspective.
Steve S
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities