Metal cutting - oxyfuel cutting, plasma cutting, machining, grinding, and other preparatory work.
- entity-unknown
-
Ace
-
Posts:
-
Joined:Mon Jul 18, 2016 2:07 pm
-
Location:Mesa, AZ
Posting to make sure I don't lose this thread... I def need some ed00mukashun on this subject....
Lincoln Electric AC225
Everlast PowerPro Multi-Process TIG/Stick/Plasma 256Si
Everlast W300 WaterCooler
Optrel e684x1
22+ Year Security Engineer developing cool shit and stoppin hackers
Everlast PowerPro Multi-Process TIG/Stick/Plasma 256Si
Everlast W300 WaterCooler
Optrel e684x1
22+ Year Security Engineer developing cool shit and stoppin hackers
- entity-unknown
-
Ace
-
Posts:
-
Joined:Mon Jul 18, 2016 2:07 pm
-
Location:Mesa, AZ
Thank you UV! I thought the only thing to learn about grinding was some basics about what disc to use and learning how not to grind yourself. WOW! Seriously awesome information and you might have just influenced me to purchase another grinder
Lincoln Electric AC225
Everlast PowerPro Multi-Process TIG/Stick/Plasma 256Si
Everlast W300 WaterCooler
Optrel e684x1
22+ Year Security Engineer developing cool shit and stoppin hackers
Everlast PowerPro Multi-Process TIG/Stick/Plasma 256Si
Everlast W300 WaterCooler
Optrel e684x1
22+ Year Security Engineer developing cool shit and stoppin hackers
RoatanBill
- RoatanBill
-
Active Member
-
Posts:
-
Joined:Thu Jul 21, 2016 10:35 pm
I posted this as a comment on the Harbor Freight site for their paddle switch angle grinder. It was meant to be whimsical, but I do like their grinder. I wanted to solve the cord problem.
I now own 9 of them, so I NEVER change what's on the spindle unless it's used up. I have spares as I'm on an island and it takes at least 2 weeks to get things shipped in. Those spares are actually used and sport duplicate spindle tools (cutting disk, cup brush, etc) so I can swap grinders when one starts to get hot from (mis)use. My tree is too small to hold all of them now, so I'm going to make a new one and hang it besides the original grinderensis roatansis
===============
New species of Harbor Freight tree discovered!
The tree, appropriately named grinderensis roatansis, is found only on the island of Roatan in the Caribbean.
It's discoverer knows it to be the only one of its kind.
This evolutionary development allows many angle grinders to occupy a small vertical space, and especially solves the power cord issue.
Earlier attempts at solving these problems invariably resulted in tools all over the place and cords being wrapped around the body of the tool resulting in an unruly power cord.
This new species of tree may spread to other areas of the world where fertile minds and a bit of welding can create clones.
I now own 9 of them, so I NEVER change what's on the spindle unless it's used up. I have spares as I'm on an island and it takes at least 2 weeks to get things shipped in. Those spares are actually used and sport duplicate spindle tools (cutting disk, cup brush, etc) so I can swap grinders when one starts to get hot from (mis)use. My tree is too small to hold all of them now, so I'm going to make a new one and hang it besides the original grinderensis roatansis
===============
New species of Harbor Freight tree discovered!
The tree, appropriately named grinderensis roatansis, is found only on the island of Roatan in the Caribbean.
It's discoverer knows it to be the only one of its kind.
This evolutionary development allows many angle grinders to occupy a small vertical space, and especially solves the power cord issue.
Earlier attempts at solving these problems invariably resulted in tools all over the place and cords being wrapped around the body of the tool resulting in an unruly power cord.
This new species of tree may spread to other areas of the world where fertile minds and a bit of welding can create clones.
- Attachments
-
- IMG_20160929_091844.jpg (72.5 KiB) Viewed 2838 times
cptjackm
- cptjackm
-
New Member
-
Posts:
-
Joined:Sat Oct 03, 2009 10:46 pm
-
Location:Newbury Park, California
Good subject.weldin mike 27 wrote:No lock on switches on a small grinder is a terrible idea. Ever try clean a heap of small parts while holding the switch.
I agree with you Mike.
I have nine electric angle grinders and a drawer full of air powered. I still have the first one that I bought used in 1958.
It's 9 inch Black and Decker that bears the name "BAD ASS".
They are the most dangerous tools in my shop and I have bled a little from time to time when I didn't treat them
with the required respect. All my grinders have lock-on switches including the several that have worn out and been
replaced. I wouldn't have it any other way.
I will also mention that the wheel guards are back on most all my grinders.
Safety is one obvious reason and having a large quantity of extra right-hand gloves is another.
I've had success modifying some of the guards, some don't need to be that big.
Jack
UV Metal Arts
- UV Metal Arts
-
Active Member
-
Posts:
-
Joined:Tue Oct 29, 2013 6:36 pm
Thanks everybody. The 3 part angle grinder series is by far is the most popular work that I have on youtube. At the time of publishing it, I really saw that there was a need for this information to be shared, so I made the best effort to make it as good as posable with the knowledge and resources that I had available. I would like to invite you all to visit my youtube page again because there's a bunch of new content all related to metal working there that I hope you find educational. Cheers UV
https://www.youtube.com/channel/UCuKaQz ... Smw/videos
https://www.youtube.com/channel/UCuKaQz ... Smw/videos
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities