It is currently Tue Nov 21, 2017 11:57 am Advanced search

First ever welding test

Welding Certification test Q&A and tips and tricks

First ever welding test

Postby VR46TheDoc » Sat Nov 11, 2017 2:22 pm

So... my first ever welding test is going to be sometime next week, at a very large company here in Tulsa that makes flares and burners. (Yea that one) The test is 1G & 2G 1/4" carbon steel, 30deg bevel on both, back gouged and filled, done with 035 Gmaw. (2 hr limit) I have the benefit of knowing exactly what the test will be and possibly even having my instructor there with me. (Who is a great dude) Just wanted to dip into the knowledge pool and get any extra tips or information on how I should go about this. This would be an incerdible opportunity to get into industry before I even finish school, not to mention get paid to learn so I don't want to blow it. Sorry if this is long winded just wanted to give all the info
Thanks - W
Not built to fly a desk, like to be judged on the quality of my work not the quality of my butt kissing.
New Member
Posts: 3
Joined: Sat Nov 11, 2017 12:36 am
Location: Tulsa, OK

Return to Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds