Page 1 of 1

Re: 2in schedule 80 carbon with 309 stainless filler 6g

Posted: Sat Feb 01, 2014 10:40 pm
by AKweldshop
Anyway, I'd break back in under a different username :twisted: :twisted: :twisted:

Re: 2in schedule 80 carbon with 309 stainless filler 6g

Posted: Sun Feb 02, 2014 12:07 am
by weldin mike 27
True. :-) change it to weldshopAK ill never suspect.

Re: 2in schedule 80 carbon with 309 stainless filler 6g

Posted: Sun Feb 02, 2014 12:56 am
by AKweldshop
:lol:

Re: 2in schedule 80 carbon with 309 stainless filler 6g

Posted: Sun Feb 02, 2014 12:40 pm
by kmcarr1983
Thank you for the replys guys I have two chances to take this test my biggest problems is speed I played a bit practicing because I was frustrated n needed to do somethin else a bit seems like light weaving may help ill repost how Monday goes in class weather permitting

Re: 2in schedule 80 carbon with 309 stainless filler 6g

Posted: Sun Feb 02, 2014 6:07 pm
by AKweldshop
kmcarr1983 wrote:Thank you for the replys guys I have two chances to take this test my biggest problems is speed I played a bit practicing because I was frustrated n needed to do somethin else a bit seems like light weaving may help ill repost how Monday goes in class weather permitting
Good Luck man ;)
hang in there.

John

Re: 2in schedule 80 carbon with 309 stainless filler 6g

Posted: Mon Feb 03, 2014 6:43 am
by weldin mike 27
Hey,

Do you have a tig finger?

This can help you get your speed constant.

Mick

Re: 2in schedule 80 carbon with 309 stainless filler 6g

Posted: Mon Feb 03, 2014 7:39 pm
by kmcarr1983
So I took the test...... waiting on cwi to double check it but in did pass thank you for the help everyone

Re: 2in schedule 80 carbon with 309 stainless filler 6g

Posted: Mon Feb 03, 2014 8:20 pm
by Otto Nobedder
kmcarr1983 wrote:So I took the test...... waiting on cwi to double check it but in did pass thank you for the help everyone
"LIKE"

Since this ain't FB, I thought I'd throw that out there.

Hope the double-check comes out on your side!

Remember always, it's not us. We didn't weld it, YOU did. All we can offer is words of experience and encouragement.

Steve S

Re: 2in schedule 80 carbon with 309 stainless filler 6g

Posted: Tue Feb 04, 2014 11:59 pm
by AKweldshop
Amen Otto,
kmcarr1983, we don't weld for people, we share our experiences and techniques....
you do the welding ;)
~John