Re: aerospace welding job test
Posted: Tue Apr 01, 2014 11:34 pm
A shoe and a half!!!
Get some pics up for our critique.
~John
Get some pics up for our critique.
~John
Welding Tips and Tricks
The Forum
https://forum.weldingtipsandtricks.com/
aerospace welding job test
https://forum.weldingtipsandtricks.com/viewtopic.php?f=3&t=4784
Page 1 of 1
Re: aerospace welding job test
Posted: Wed Apr 02, 2014 4:09 pm
That could just be the entrance test, but if you can do soda cans you'll be fine. After you were hired you had to qualify on inconel, titanium, stainless, haynes 188, and aluminum in .030 and .080. Then came training on the parts.
Re: aerospace welding job test
Posted: Wed Apr 02, 2014 8:43 pm
This is my best can yet (ironically my first attempt)....one side good the other not so much. The hardest part of this is getting them tacked up without starting holes in the cans and my arc is constantly jumping from can to can. Practice makes perfect though
Re: aerospace welding job test
Posted: Wed Apr 02, 2014 9:59 pm
Well,
Your weld is stronger than the base metal.
Lets see the bend.
~John
Your weld is stronger than the base metal.
Lets see the bend.
~John