[Burning Filler Rod]

Hey All,

I wanted to expand from MIG so I shopped for a 'reasonable' priced TIG. I settled for the WeldPro 200GD with the CK torch. Been using it since December and I a very pleased with it. Sure it is not one of the 'big-named' welders, but for my type of projects it is excellent.

The welder was ordered on December 28, 2019 and received on January 7, 2020. The shipping packaging is unbelievably good. The unit could survive being tossed out of a delivery truck going 50 mph. In my opinion, this says a lot about WeldPro’s pride in their product. (S/N 319069901312)

The ‘fit & finish’ on the welder is excellent. The one and only knob on the unit is easy to grasp even with welding gloves on. The rotation is very fluid and gives good tactile feedback. Navigating the control panel is intuitive and is controlled with micro buttons - also easy to use wearing gloves. The panel appears to be nicely sealed from dust without the need for additional covering.

High frequency starts are crisp with authority; even when using low amperage settings. I opted for the optional CK air cooled flex torch and of course I’m pleased with it.

The provided foot pedal is industry standard and is silky smooth without sliding all over the floor. Other accessories include torch button, ground clamp, and regulator.

I’m not yet capable of ‘kanekid’ welds, but I think that this welder is capable of that performance. (I’ll keep practicing.)

What really stands out with the WeldPro 200GD purchase is their Technical Support. Should you need to call, you will not be answered by a foreign country’s Customer Relation bank of people that handles many other clients and products….. Your call is answered by Mr. Joe West. He is always ready to provide assistance or answer any questions.

I still learning and this little yellow box I'm sure will help.

[Oscar]

Where are the mandatory pictures?

[Burning Filler Rod]

Oscar,,, My Bad,,, I kneel to you.... Sorry if the arrangement is lame. This is my first photo post.

Small foot print

IMG_0008.JPG (99.15 KiB) Viewed 2901 times

Compact

DSC08845.JPG (129.39 KiB) Viewed 2901 times

The front panel. Easy to use.

DSC08868.JPG (131.58 KiB) Viewed 2901 times

It works.

IMG_0004.JPG (121.83 KiB) Viewed 2901 times

I'm a furniture builder and the welder need to share.

IMG_0009.JPG (108.71 KiB) Viewed 2901 times

Certainly not KaneKid

IMG_4897.JPG (50.35 KiB) Viewed 2901 times

[Burning Filler Rod]

I just learned that if you 'click' on a photo it gets larger..... I'm learning..... Whew

[Oscar]

Looks good! But I wouldn't trust myself with metal working on that nice tile floor, lol.

[Burning Filler Rod]

Looks good! But I wouldn't trust myself with metal working on that nice tile floor, lol.

Oscar,

Thanks for the advise. Actually, I do very little metal fabrication. My primary work is building hardwood furniture, but occasionally I need to do some small, less that 0.25" thickness, metal 'widget'. In the past I would MIG the stuff and put up with the smoke, sparks, and mess.

So, when I get a handle on TIG'ing I'll be golden. Man, the learning curve is brutal. I feel bad for someone starting out without even the MIG experience.

Again, thanks for the input.....

[Bill Beauregard]

I like your avatar. I thought Reddy Kilowatt was a regional thing. Green mountain Power's predecessor Central Vermont Public Service, (CVPS) had Reddy on the door of each truck. The slogan "The can do company" was under his image.

I always said they added 't to the word can. No matter what you needed, some snotty woman on the phone would say "I'm sorry SIR we can't do that."

[Burning Filler Rod]

I like your avatar. I thought Reddy Kilowatt was a regional thing. Green mountain Power's predecessor Central Vermont Public Service, (CVPS) had Reddy on the door of each truck. The slogan "The can do company" was under his image.

I always said they added 't to the word can. No matter what you needed, some snotty woman on the phone would say "I'm sorry SIR we can't do that."

Bill,,,,

You know,,, I think it's the way of the country now. Sad, but true. What ever happened to the 'Can-Do' mind set?

Thanks for the input. I think I first learned about Reddy Kilowatt as a child while living in Big Spring, Texas.

See ya, bye

[kiwi2wheels]

Double post

[kiwi2wheels]

I like your avatar. I thought Reddy Kilowatt was a regional thing. Green mountain Power's predecessor Central Vermont Public Service, (CVPS) had Reddy on the door of each truck. The slogan "The can do company" was under his image.

I always said they added 't to the word can. No matter what you needed, some snotty woman on the phone would say "I'm sorry SIR we can't do that."

Was she English ?