Stick Welding Tips, Certification tests, machines, projects
TheGreaseMaster
  • Posts:
  • Joined:
    Sat Nov 12, 2016 12:56 pm

I just recently bought a Square Wave 200 to practice on pipe, both tig and stick. The machine runs tig and 7018 quite well. My problem is when I run 5P+ on it, it strikes up just fine, but I can only weld about a half an inch on a root before it terminates the arc. It's like someone just shuts off the welder while I'm welding. If any one knows what I'm doing wrong I could really use the help.
ryanjames170
  • Posts:
  • Joined:
    Sun Sep 25, 2016 12:46 pm
  • Location:
    Wisconsin

TheGreaseMaster wrote:I just recently bought a Square Wave 200 to practice on pipe, both tig and stick. The machine runs tig and 7018 quite well. My problem is when I run 5P+ on it, it strikes up just fine, but I can only weld about a half an inch on a root before it terminates the arc. It's like someone just shuts off the welder while I'm welding. If any one knows what I'm doing wrong I could really use the help.
it is something to due with inverters and there Lower open circuit voltage. try some 6011 by lincoln i know its not ezactly the same but it will run on it.
Welder/Fitter
RM Fab & Products

Lincoln Invertec V300 pro
Miller 54D Wire Feeder
Miller 2E DC Welder Generator
Everlast Power IMIG 200
Everlast Power ARC 200ST
Klutch Plasma 275i Plasma Cutter
Hobard/Smith Oxy Torch using propane.
Poland308
  • Posts:
  • Joined:
    Thu Sep 10, 2015 8:45 pm
  • Location:
    Iowa

Not all inverters have issues with 6010. I have no trouble running it on my TA 186 at home or with my little miller 150 STL at work. Or any of the several other inverters at work.
I have more questions than answers

Josh
User avatar
  • Posts:
  • Joined:
    Thu Dec 26, 2013 12:41 am
  • Location:
    Laredo, Tx

It likely has a low OCV/welding voltage, and once the Hot-Start switches off, so does the arc. Just my guess.
Image
RonLyke
  • Posts:
  • Joined:
    Fri Sep 09, 2016 5:07 am

Thanks.
I guess I'll spend some serious practice time with 6011 and maybe some 7018, then come back & try 6010. From what I've read, I won't be surprised if Oscar is right.
Bill Beauregard
  • Posts:
  • Joined:
    Thu Jan 24, 2013 9:32 pm
  • Location:
    Green Mountains of Vermont

I've run hundreds of pounds of 6011 on AC, some on DC. 6010 is less familiar to me. My Dynasty runs it fine. I'm not sure I could tell the difference.

Bill
Post Reply