Stick Welding Tips, Certification tests, machines, projects
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 10:13 pm
  • Location:
    Eddy, TX

Oscar,
Those are the exact same thing. Welding Material Sales is the parent company that private labels fillers for a lot of companies and sells their own branded fillers, Blue Demon. They also do the private labeling for Weldporn's fillers. I looked into having them do my private labeling but a lot of their fillers are made overseas and I wanted US if I could. Some fillers, like Ti, are mostly made over the pond and can't be helped but I will take what US products I can. I am not saying those are junk at all, just letting you know where they actually come from.
-Jonathan
User avatar
  • Posts:
  • Joined:
    Sun Oct 27, 2013 10:57 pm
  • Location:
    Big Lake/Monticello MN, U.S.A.

Oscar wrote: For those not mathematically inclined perhaps thinking that 20-thousandths is nothing, that translates into 70% more flux than the 5P+(!).
I read that and thought "that can't be right..."

Did the math...yeah, it's right - holy crap is all I can say.

That much additional flux has to affect something.
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
User avatar
  • Posts:
  • Joined:
    Thu Dec 26, 2013 12:41 am
  • Location:
    Laredo, Tx

MinnesotaDave wrote:
Oscar wrote: For those not mathematically inclined perhaps thinking that 20-thousandths is nothing, that translates into 70% more flux than the 5P+(!).
I read that and thought "that can't be right..."

Did the math...yeah, it's right - holy crap is all I can say.

That much additional flux has to affect something.
I said the same thing. So I checked the math several times as well.
Image
Poland308
  • Posts:
  • Joined:
    Thu Sep 10, 2015 8:45 pm
  • Location:
    Iowa

That one always amazes me. I did some calculations to see how much bigger of a pipe I needed to run for the flow I needed. Thought I was going to have to go from 3/4 inch up to like 3 inch. But only needed 1-1/2 inch.
I have more questions than answers

Josh
Post Reply