Page 2 of 4

Re: 7018 on AC

Posted: Thu May 04, 2017 7:00 am
by Farmwelding
Yeah I was thinking about getting some weld inspection tools in general just to have. I suppose someday it wouldn't hurt to become a CWI too.

As for learning stick-I got to learn on a 35' straight body grain truck-kenworth t800, Cummins 255, 9 speed eaton fuller tranny. No clutch except to start and stop.

Re: 7018 on AC

Posted: Thu May 04, 2017 10:29 pm
by Farmwelding
Well as of 5:30 I have officially passed my first weld test. Only one little bit of undercut that opened that was still passable. And then he put me on some vertical t-joints to get that down after we bent her. He also sent me some new 3/32" rods to try since the others were older so we'll see

Re: 7018 on AC

Posted: Tue May 09, 2017 9:07 pm
by Popeye the old miner
Farmwelding wrote:Well as of 5:30 I have officially passed my first weld test. Only one little bit of undercut that opened that was still passable. And then he put me on some vertical t-joints to get that down after we bent her. He also sent me some new 3/32" rods to try since the others were older so we'll see
Good for you!!!! Congradulations

Re: 7018 on AC

Posted: Tue May 09, 2017 10:20 pm
by Farmwelding
Popeye the old miner wrote:
Farmwelding wrote:Well as of 5:30 I have officially passed my first weld test. Only one little bit of undercut that opened that was still passable. And then he put me on some vertical t-joints to get that down after we bent her. He also sent me some new 3/32" rods to try since the others were older so we'll see
Good for you!!!! Congradulations
Funny you say that! I've been trying vertical and WOW I can suck like a gay man sucking a golf ball through a garden hose! As with it all-patience and keep burning.

Re: 7018 on AC

Posted: Tue May 09, 2017 10:28 pm
by exnailpounder
Farmwelding wrote:
Popeye the old miner wrote:
Farmwelding wrote:Well as of 5:30 I have officially passed my first weld test. Only one little bit of undercut that opened that was still passable. And then he put me on some vertical t-joints to get that down after we bent her. He also sent me some new 3/32" rods to try since the others were older so we'll see
Good for you!!!! Congradulations
Funny you say that! I've been trying vertical and WOW I can suck like a gay man sucking a golf ball through a garden hose! As with it all-patience and keep burning.
Gosh could I have a field day right here :lol: :lol:

Re: 7018 on AC

Posted: Tue May 09, 2017 11:05 pm
by Farmwelding
You could Jeff, but you didn't and I thank you. Any others who try to twist my words will not be appreciated-just a full metal jacket reference. Besides not having a good day. AP calc test all morning, go fishing for two hours with a buddy and get nothing, two minutes after I leave he catches a 15 in bass, then I get to run vertical 7018s for 4 hours and then drive another half an hour back home. Maybe Thursday will be better when I go back up there and run more vertical.

Re: 7018 on AC

Posted: Wed May 10, 2017 4:08 am
by Popeye the old miner
Farmwelding wrote:You could Jeff, but you didn't and I thank you. Any others who try to twist my words will not be appreciated-just a full metal jacket reference. Besides not having a good day. AP calc test all morning, go fishing for two hours with a buddy and get nothing, two minutes after I leave he catches a 15 in bass, then I get to run vertical 7018s for 4 hours and then drive another half an hour back home. Maybe Thursday will be better when I go back up there and run more vertical.
Patience Grasshopper Patience....it all comes with time and practice...and Patience....you will figure it out

Re: 7018 on AC

Posted: Wed May 10, 2017 7:24 am
by Farmwelding
Popeye the old miner wrote:
Farmwelding wrote:You could Jeff, but you didn't and I thank you. Any others who try to twist my words will not be appreciated-just a full metal jacket reference. Besides not having a good day. AP calc test all morning, go fishing for two hours with a buddy and get nothing, two minutes after I leave he catches a 15 in bass, then I get to run vertical 7018s for 4 hours and then drive another half an hour back home. Maybe Thursday will be better when I go back up there and run more vertical.
Patience Grasshopper Patience....it all comes with time and practice...and Patience....you will figure it out
To be honest the main thing I'm mad about is the fish...
Other than that I don't care a whole lot. I know it takes time Adam is gonna be a long while.

Re: 7018 on AC

Posted: Wed May 10, 2017 9:04 am
by MinnesotaDave
Farmwelding wrote: To be honest the main thing I'm mad about is the fish...
Other than that I don't care a whole lot. I know it takes time Adam is gonna be a long while.
Most people I know are happy to have gotten to hang out with a friend fishing.
Then happy for the friend who caught a good fish.
Matter of perspective.

Re: 7018 on AC

Posted: Wed May 10, 2017 10:30 am
by Farmwelding
MinnesotaDave wrote:
Farmwelding wrote: To be honest the main thing I'm mad about is the fish...
Other than that I don't care a whole lot. I know it takes time Adam is gonna be a long while.
Most people I know are happy to have gotten to hang out with a friend fishing.
Then happy for the friend who caught a good fish.
Matter of perspective.
Well...we actually were having a bet (just a $5 wager) and he caught the fish where I was fishing at so that's it. Not mad about him catching it-more just the irony of me leaving and then two minutes. Still would have rather gone fishing with him than sitting around on my butt regardless. And I can't get mad at a guy for catching a nice fish.

Re: 7018 on AC

Posted: Wed May 10, 2017 4:42 pm
by exnailpounder
Sounds like you need some tuna taco. Takes the edge off...Mr. Grouchy :lol:

Re: 7018 on AC

Posted: Wed May 10, 2017 5:32 pm
by Farmwelding
exnailpounder wrote:Sounds like you need some tuna taco. Takes the edge off...Mr. Grouchy :lol:
Gosh that sounds awful. I will take some cow in my taco...unless there is a second meaning to the phrase "tuna taco"

Re: 7018 on AC

Posted: Wed May 10, 2017 5:46 pm
by exnailpounder
Farmwelding wrote:
exnailpounder wrote:Sounds like you need some tuna taco. Takes the edge off...Mr. Grouchy :lol:
Gosh that sounds awful. I will take some cow in my taco...unless there is a second meaning to the phrase "tuna taco"
There IS a second meaning :lol: You didn't really believe I would actually advise you to eat seafood...did you? :lol: Instead of the tuna taco...look up "the wound that won't heal" or squack. And you thought you were getting an education in school :lol:

Re: 7018 on AC

Posted: Wed May 10, 2017 6:01 pm
by Coldman
We love our fishing and seafood over here. I especially enjoy spearing the bearded clam.


Sent using Tapatalk

Re: 7018 on AC

Posted: Wed May 10, 2017 6:02 pm
by Poland308
I think this should be the designated derailed post thread!

Re: 7018 on AC

Posted: Wed May 10, 2017 6:03 pm
by Poland308
I prefer baked goods like stuffed muffins.

Re: 7018 on AC

Posted: Wed May 10, 2017 6:54 pm
by Farmwelding
Words can not explain how many strange new words I've discovered here. Kind of disturbing in a way. :lol:

Re: 7018 on AC

Posted: Wed May 10, 2017 7:00 pm
by exnailpounder
Coldman wrote:We love our fishing and seafood over here. I especially enjoy spearing the bearded clam.


Sent using Tapatalk
You and me both :lol:

Re: 7018 on AC

Posted: Wed May 10, 2017 7:02 pm
by exnailpounder
Poland308 wrote:I think this should be the designated derailed post thread!
I'm down with that. It's the kids fault. :lol:

Re: 7018 on AC

Posted: Wed May 10, 2017 7:03 pm
by Farmwelding
exnailpounder wrote:
Coldman wrote:We love our fishing and seafood over here. I especially enjoy spearing the bearded clam.


Sent using Tapatalk
You and me both :lol:
You guys are killing me :lol:

Re: 7018 on AC

Posted: Wed May 10, 2017 7:06 pm
by exnailpounder
Farmwelding wrote:Words can not explain how many strange new words I've discovered here. Kind of disturbing in a way. :lol:
What did I tell you? You're REAL education began when I said hello :lol: Here's a lesson....every woman that you see..you need to decide in your mind if you want to mount her...lesson over...no charge :lol:

Re: 7018 on AC

Posted: Wed May 10, 2017 7:30 pm
by Farmwelding
exnailpounder wrote:
Farmwelding wrote:Words can not explain how many strange new words I've discovered here. Kind of disturbing in a way. :lol:
What did I tell you? You're REAL education began when I said hello :lol: Here's a lesson....every woman that you see..you need to decide in your mind if you want to mount her...lesson over...no charge :lol:
Thanks for the tip. :lol:

By the way... You're implies "you are" which is grammatically incorrect. :lol: use your

Re: 7018 on AC

Posted: Wed May 10, 2017 7:43 pm
by exnailpounder
Farmwelding wrote:
exnailpounder wrote:
Farmwelding wrote:Words can not explain how many strange new words I've discovered here. Kind of disturbing in a way. :lol:
What did I tell you? You're REAL education began when I said hello :lol: Here's a lesson....every woman that you see..you need to decide in your mind if you want to mount her...lesson over...no charge :lol:
Thanks for the tip. :lol:

By the way... You're implies "you are" which is grammatically incorrect. :lol: use your
I saw it...I was too fuggin lazy to go back and change it :lol: Go get some cornfedder in the hayloft and give us a break will ya :lol:

Re: 7018 on AC

Posted: Wed May 10, 2017 9:05 pm
by Otto Nobedder
Farmwelding wrote:
exnailpounder wrote:
Farmwelding wrote:Words can not explain how many strange new words I've discovered here. Kind of disturbing in a way. :lol:
What did I tell you? You're REAL education began when I said hello :lol: Here's a lesson....every woman that you see..you need to decide in your mind if you want to mount her...lesson over...no charge :lol:
Thanks for the tip. :lol:

By the way... You're implies "you are" which is grammatically incorrect. :lol: use your
You are f#$%ing kidding me.
The guy who doesn't edit his "text-to-talk" is giving a grammar lesson?
That's the biggest smile I've had all day!

Steve

Re: 7018 on AC

Posted: Wed May 10, 2017 9:27 pm
by Farmwelding
Funny story Steve...
First, I felt like I should get one chance and it is Jeff so...
And secondly, I don't use text to talk. I just type and have fat fingers