It is currently Sat Dec 16, 2017 9:03 am Advanced search

Lorch ISI 5cl problem

Stick Welding Tips, Certification tests, machines, projects

Re: Lorch ISI 5cl problem

Postby gabyh » Fri Oct 13, 2017 6:02 am

After an e-mail discussion with a HELPDESK@lorch.eu, I realized that there would be another pcb-level manual service for those inverter component modules relative to that handbook in German but he haven’t the permission to send out detailed electrical schematics of the pcb’s...so i think the only chance is to find another persons who have this machine and to make a photo of this missing pcb 650.5130.0 pc-board GLE, an tomake a schematic from this photo
gabyh
New Member
 
Posts: 17
Joined: Thu Sep 21, 2017 10:45 am

Re: Lorch ISI 5cl problem

Postby pgk » Mon Oct 16, 2017 1:58 pm

The current lineup of Lorch are very nice power supplies. Hope you get it figured out and repaired..
Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Ellis 1600
User avatar
pgk
Guide
 
Posts: 131
Joined: Mon Feb 09, 2015 4:48 pm
Location: Michigan

Re: Lorch ISI 5cl problem

Postby gabyh » Wed Oct 18, 2017 7:25 am

For moment i can't make him, because i don't find this module at good price. At a local dealers of lorch in my country the price of module is ~450E with TVA. At this price it's not oportunity to make him.
I think the last chance is to find a user who have this model machine and to make a good photos of this module from side/back side of a pcb and to make a reverse engineering.
gabyh
New Member
 
Posts: 17
Joined: Thu Sep 21, 2017 10:45 am

Re: Lorch ISI 5cl problem

Postby Poland308 » Wed Oct 18, 2017 8:32 pm

Due to obsolescence, sometimes it’s time to abandon not so old machines.
I have more questions than answers

Josh
Poland308
Weldmonger
 
Posts: 2314
Joined: Thu Sep 10, 2015 8:45 pm
Location: Iowa

Re: Lorch ISI 5cl problem

Postby olek » Thu Oct 19, 2017 6:13 am

gabyh wrote:After an e-mail discussion with a HELPDESK@lorch.eu, I realized that there would be another pcb-level manual service for those inverter component modules relative to that handbook in German but he haven’t the permission to send out detailed electrical schematics of the pcb’s...so i think the only chance is to find another persons who have this machine and to make a photo of this missing pcb 650.5130.0 pc-board GLE, an tomake a schematic from this photo



I suggest you to give a call during holidays, even in large companies you can sometime join a higher ranked person that way, one that can afford to send you detailed manual of sketch of a disrupted model, of that will try to help you as it is not its primary function.
Pianos , restorer and tuner
Dedicated to learn welding since april
slowly learning ;) not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
olek
Ace
 
Posts: 213
Joined: Sat Jun 03, 2017 4:07 pm
Location: France

Re: Lorch ISI 5cl problem

Postby gabyh » Thu Oct 19, 2017 11:05 am

I think ..i have to wait some time and to find one with another probleme and to take this module
gabyh
New Member
 
Posts: 17
Joined: Thu Sep 21, 2017 10:45 am

Re: Lorch ISI 5cl problem

Postby gabyh » Wed Nov 01, 2017 8:57 am

I'm searching for the schematic/diagram of this module or to buy another one from a defective machine.
gabyh
New Member
 
Posts: 17
Joined: Thu Sep 21, 2017 10:45 am

Previous

Return to Stick Welding/Arc Welding - Shielded Metal Arc Welding