It is currently Thu Mar 30, 2017 12:40 am
Stick Welding Tips, Certification tests, machines, projects
Just want some feedback on how one of my vertical plates looks, I'm still in school but getting ready to test for a shipyard
- 20151104_122303.jpg (33.87 KiB) Viewed 622 times
Last edited by Csaw
on Sun Nov 08, 2015 6:31 pm, edited 1 time in total.
- Posts: 1
- Joined: Tue Nov 03, 2015 7:02 pm
Welcome Csaw, hope you do well at the shipyard.
I'm going to move your topic over to the stick/arc welding category where you will get more views and plenty of comments I'm sure.
Go break something, then you can weld it back the right
- Posts: 296
- Joined: Sun Feb 17, 2013 1:30 pm
- Location: Colorado
First off how did your test go? Second I recommend putting a little weave motion or upside down U motion to your beads. it helps me to keep in time and the weld tends to come out a little flatter without the hump in the middle like yours did here.
- Posts: 9
- Joined: Mon Jul 13, 2015 1:45 pm
- Location: South Texas
Return to Stick Welding/Arc Welding - Shielded Metal Arc Welding