Stick Welding Tips, Certification tests, machines, projects
JeffCanforaCA
  • Posts:
  • Joined:
    Thu Dec 02, 2010 11:36 pm

What no attachment for hand torch to bevel us some pipe? :mrgreen: At home practicing 6G. Got good info off this site for 1/8" root opening and 1/8" land. But how bout included angle? Guessin' 45*, for 22.5 per side. Gracias
JeffCanforaCA
  • Posts:
  • Joined:
    Thu Dec 02, 2010 11:36 pm

Looks like 60-75. I see nothing on my 45 guess. Like the 75, like to fill wider gaps. Plus d1.1 tube cert test shows 37.5 single bevel. Other end is square. Ain't nothin like knowin for sure...
kermdawg
  • Posts:
  • Joined:
    Tue May 25, 2010 8:16 pm
  • Location:
    All over, mostly southwest USA

Usual bevel angle on schedule 40 is 30-37.5, for a groove angle of 60-75 degrees. I think your allowed +/- 2.5 degrees (someone correct me on that?). Again, thats for schedule 40 carbon steel.
Signature? Who needs a F***ing signature?
welder57
  • Posts:
  • Joined:
    Thu Jan 20, 2011 7:42 pm

depends on code-5 deg plus or minus
kermdawg
  • Posts:
  • Joined:
    Tue May 25, 2010 8:16 pm
  • Location:
    All over, mostly southwest USA

Thats 5 degrees on the groove angle right? Sounds about right cause that would be 2.5 bevel angle.
Signature? Who needs a F***ing signature?
QANDT
  • Posts:
  • Joined:
    Tue Oct 25, 2011 9:31 am
  • Location:
    San Diego

Mil-STD-22D is a great source for joint designs uses AWS A2.4 a source it can be found here http://www.everyspec.com/MIL-STD/MIL-ST ... 22D_21685/
harleyotto

depends on code-5 deg plus or minus????
At the touch of love everyone becomes a poet.Blancpain Watches
Post Reply