Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
User avatar
  • Posts:
  • Joined:
    Sat Mar 30, 2013 11:49 am
  • Location:
    Sweden

TamJeff wrote: I got lucky and nailed those on the first try.
I bet luck has nothing to do with it.
Awesome work as usual
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

Incredible TamJeff!!!
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 10:13 pm
  • Location:
    Eddy, TX

Well maybe not as impressive as Zank or TamJeff but this is the only alum project I have done in the past few weeks. A good friend needed a cover for the batteries on his semi and brought me a 3/16" used diamond plate sheet to make this. I provide the .100 sheet and 6 cut of wheels and this is what I came up with.
-Jonathan
Attachments
image.jpg
image.jpg (99.96 KiB) Viewed 2098 times
TamJeff
  • Posts:
  • Joined:
    Tue Dec 04, 2012 4:46 am

Thats a nice project and neatly done. It always seems if people bring aluminum weldors, used diamond plate. :)
Miller ABP 330, Syncrowave 250, Dynasty 300 DX.
Honorary member of the Fraternity of Faded Tee Shirts.
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

Beautiful fab, Jonathan!
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

dirtmidget33 wrote:@Zank
Got a question about your back purge set up if you wouldn't mind. I am planning to do some frames not bikes but am looking for ideas for sealing and doing the back purge. Does you jig just use the taper of the mounts that hold it to seal the tubing up or do you have some type of seal on them. Also where your argon comes in for the back purge do you have a diffuser inside or just vent it straight into tubing.
Very nice bikes to bad my body can no longer handle riding I think I would have to have you build me one. I used to ride a Gary klein and a Gary Fisher aluminum frame mountain bikes. I still have them will never get rid of them just limited on my riding. Ride like a 80 year old now
I'm sorry I missed this. You are correct. The cones that hold the tubes in the jig do a good job sealing the tube ends for tacking. I tack in the jig and then weld on the bench. My heatsinks have caps to seal the ends of the tubes. Argon is introduced through the heatsink. I only backpurge steel and titanium. Hope that helps.
dirtmidget33
  • Posts:
  • Joined:
    Tue May 13, 2014 5:22 pm

Thanks Zank ,
That will be helpful in designing my purge equipment.
why use standard nozzles after gas lens where invented. Kinda of like starting fires by rubbing sticks together.
aeroplain
  • Posts:
  • Joined:
    Tue Jun 03, 2014 10:15 pm
  • Location:
    Minnesota

I don't get to weld every day and when I do it aint pretty. Algae, paint, corrosion, oil, foam, old glue, and on this one there was Epoxy, body filler added in, then bed liner to hide the crappy repair, but I won!! :D

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
User avatar
  • Posts:
  • Joined:
    Tue Jul 01, 2014 4:34 am
  • Location:
    Skiatook, Oklahoma

What is that, a boat?

Sent from my SM-T537R4 using Tapatalk
aeroplain
  • Posts:
  • Joined:
    Tue Jun 03, 2014 10:15 pm
  • Location:
    Minnesota

Yes
79jasper wrote:What is that, a boat?


Sent from my SM-T537R4 using Tapatalk
User avatar
  • Posts:
  • Joined:
    Tue Jul 01, 2014 4:34 am
  • Location:
    Skiatook, Oklahoma

That's a scary thought with how some people try to rig things. Lol

Sent from my SM-T537R4 using Tapatalk
User avatar
  • Posts:
  • Joined:
    Sun Sep 22, 2013 10:14 am
  • Location:
    Minneapolis Mn 55407

Challanging postions to say the least!
don't think my knees/old joints could get in there to even hold the torch
In those positions if the weld holds it is agood weld
Everlast 250EX
Miller 250 syncrowave
Sharp LMV Vertical Mill
Takisawa TSL-800-D Lathe
Coupla Bandsaws,Grinders,surface grinder,tool/cutter grinder
and more stuff than I deserve(Thanks Significant Other)
aeroplain
  • Posts:
  • Joined:
    Tue Jun 03, 2014 10:15 pm
  • Location:
    Minnesota

Hood time sure helps

Image
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

A little steel, aluminum, and titanium from last week.

Image
Random welding pics by Zanconato Custom Cycles, on Flickr

Image
Random welding pics by Zanconato Custom Cycles, on Flickr

This is a 1/16" 2% lanthanated electrode after I finished the frame above. I am going to start a thread soon about what I've found in experimenting with independently adjustable EN and EP. It's been pretty amazing.

Image
Random welding pics by Zanconato Custom Cycles, on Flickr

Experimenting with high speed pulse (to keep heat input down) and a #14 toxic cup on titanium. Very pleased with how clean the titanium stayed. These are as welded. No brushing.
Image
Random welding pics by Zanconato Custom Cycles, on Flickr

Image
Random welding pics by Zanconato Custom Cycles, on Flickr
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 10:13 pm
  • Location:
    Eddy, TX

zank,
I can't figure out if you make me sick or if I idolize you. Maybe a little of both 8-)
-Jonathan
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

Right back at ya, Jonathan ;)
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 10:13 pm
  • Location:
    Eddy, TX

zank wrote:Right back at ya, Jonathan ;)
:lol: :lol: :lol:
-Jonathan
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

If, as Jody said, you havent actually been tigging since you popped out of the womb, we do hate you. In the nicest possible way. Lol

Mick
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

I'm a one trick pony. I can't weld in a straight line :lol:
ESENTI
  • Posts:
  • Joined:
    Wed Jan 04, 2012 8:36 am

Dear Mike, you do well congrats , Can you say few things more about EN and EP please .I always try and I always fail to produce nerrow clean seams or beats . What is your gas flow ? .
Esenti
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

Hi Esenti,
Yes, I will post in a new thread later this week. I just want to get my thoughts down first and get some good pictures. What machine are you running?
Mike
ESENTI
  • Posts:
  • Joined:
    Wed Jan 04, 2012 8:36 am

Dear Mike, I have fronius magic wave 2200 2 years now .Its a good machine. ( i was close to buy a miller but since in Greece
it is not easy to find i choose Fronius) .
My welding has not impressed anybody yet. Only lately i have started to take some score out of it . I usually do repairs where you need a very powerfull machine to manage an aged aluminum corroded and fatigued . I like good penetration to boil all in -purities out and then appearance.Usually the pieces i weld are so dirty that is very hard to clean properly.
These are older welding i do better now . I do better in appearance when i make stops
with the tig torch switch . You do impressively better well done .

Esenti ( from esential )
Attachments
demo2.JPG
demo2.JPG (60.01 KiB) Viewed 2274 times
demo1.JPG
demo1.JPG (47.15 KiB) Viewed 2274 times
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

Looks great! Doing repairs on oil soaked cast aluminum is a lot harder than what I'm doing.
ESENTI
  • Posts:
  • Joined:
    Wed Jan 04, 2012 8:36 am

Thank you , I think there is some room with my adjustments i enclose the POS and NEG off my machine , i use square wave
POS and NEG waveform Is it ok? . The ark seems a bit not focus and lacks of accuracy .
Esenti
Attachments
POS, NEG.JPG
POS, NEG.JPG (41.62 KiB) Viewed 2258 times
Bill Beauregard
  • Posts:
  • Joined:
    Thu Jan 24, 2013 9:32 pm
  • Location:
    Green Mountains of Vermont

Use ear plugs and square wave, start at 60% EN or 40% EP. Sometimes arc wander is caused by too large a tungsten. Your grind should be blunt.
Post Reply