Feels hard to me. That's why I thought it was a plastic cover. It could be rubber I guess but once I connect it to my welder I will get a better feel for how it works.Oscar wrote:Interesting. So is that a flexible rubber membrane of sorts, with the button underneath it? or is that the actual button? Does it flex?
Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
He just said it " feels hard" to him...he's drunk again and has no idea what you're talking aboutelectrode wrote:Feels hard to me. That's why I thought it was a plastic cover. It could be rubber I guess but once I connect it to my welder I will get a better feel for how it works.Oscar wrote:Interesting. So is that a flexible rubber membrane of sorts, with the button underneath it? or is that the actual button? Does it flex?
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
- beavis-and-butthead-hehe.jpg (31.59 KiB) Viewed 3430 times
ExThreadJacker: Did you just get back from vacation??
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Nah..working a job way up north by Farmboy...lots of driving time...cutting into my drinking...dammitelectrode wrote:beavis-and-butthead-hehe.jpgIt works great, just doesn't last very long anymore. Now if you are referring to the button, I haven't hooked that gizmo up yet.
ExThreadJacker: Did you just get back from vacation??
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Did you take a minute to drop in on him and/or his school? I'll bet that beer you owe me they'd appreciate a working welder with years in the trade stopping in to say, "Hello," and your sense of humor would make it priceless.exnailpounder wrote:Nah..working a job way up north by Farmboy...lots of driving time...cutting into my drinking...dammitelectrode wrote:beavis-and-butthead-hehe.jpgIt works great, just doesn't last very long anymore. Now if you are referring to the button, I haven't hooked that gizmo up yet.
ExThreadJacker: Did you just get back from vacation??
Steve
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
I'm not close enough to go see him but not very far away. I've had to behave myself the last few days as I been driving alot but jobs over tomorrowPoland308 wrote:I'd bet my beer he gets tazzed before he gets off school grounds!
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Im doing 140 miles a day and it sucks...I thought about getting a room but my partner has little ones to care for. I used to like going out of town when I was younger but I watched a TV special about all the nasty stuff in hotel rooms that shows up under a black light....did you watch it too I'll see if I can find you a linkPoland308 wrote:I hear ya I'm working on an ammonia chiller for a ice rink. I'm about 200 miles from home sitting in a hotel.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
https://www.youtube.com/watch?v=6sIu-6LsVE8
Hey Josh...here's that link for ya buddy...Nighty night
Hey Josh...here's that link for ya buddy...Nighty night
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Ewww...are you sure? Did you even bring your black light? Nothing like sleeping in dried goo.Poland308 wrote:This is why I'm picky about where I stay. If I'm unsure of the quality of the hotel, then I just drink more beer. I'll sleep fine either way.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
OH really...I could sense some change in the force...what city you working in.exnailpounder wrote:Nah..working a job way up north by Farmboy...lots of driving time...cutting into my drinking...dammitelectrode wrote:beavis-and-butthead-hehe.jpgIt works great, just doesn't last very long anymore. Now if you are referring to the button, I haven't hooked that gizmo up yet.
ExThreadJacker: Did you just get back from vacation??
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
I once made the mistake of blacklighting a part in the shop bathroom, so as not to walk to the clean room.
"Ooops".
I did not want to know...
Steve
"Ooops".
I did not want to know...
Steve
OK folks, I know this is an old thread and some folks do not appreciate old threads being brought to the top.
However, I felt very strongly that the TIG Button should be reemphasized for those not familiar with the product.
I am 77 years old and balancing on one foot and trying to control the foot pedal is just about impossible. I have tried the thumb controls and hate them. I first saw a prototype of this product in our local welding shop a few years ago and fell in love with the concept (easy finger tip control of the amperage). I finally bit the bullet and bought one about a year ago for my Miller Synchrowave 180. It has been an amazing help with my TIG welding.
When I first started using the TIG Button, I ran into a problem of being “bit” by some stray current when I activated the button. I contacted Dave Vogel and he walked me through the issue. Turned out that Miller sets up their welders (at least some of them) for a very high high frequency start amperage spike and somehow that is conducted to the TIG button. The solution was to set the points gap to a minimum. I bring this up to emphasize that Dave was a most helpful vendor.
This week, to my horror, the TIG Button failed to work and I had to resort to a foot pedal . I contacted Dave and he replied immediately asking me to call him. Over the phone, he quickly walked me though a troubleshooting process and we determined that the flexing in the lead to the button had loosened a connection. Simple fix and another great support effort by Dave.
Jim
However, I felt very strongly that the TIG Button should be reemphasized for those not familiar with the product.
I am 77 years old and balancing on one foot and trying to control the foot pedal is just about impossible. I have tried the thumb controls and hate them. I first saw a prototype of this product in our local welding shop a few years ago and fell in love with the concept (easy finger tip control of the amperage). I finally bit the bullet and bought one about a year ago for my Miller Synchrowave 180. It has been an amazing help with my TIG welding.
When I first started using the TIG Button, I ran into a problem of being “bit” by some stray current when I activated the button. I contacted Dave Vogel and he walked me through the issue. Turned out that Miller sets up their welders (at least some of them) for a very high high frequency start amperage spike and somehow that is conducted to the TIG button. The solution was to set the points gap to a minimum. I bring this up to emphasize that Dave was a most helpful vendor.
This week, to my horror, the TIG Button failed to work and I had to resort to a foot pedal . I contacted Dave and he replied immediately asking me to call him. Over the phone, he quickly walked me though a troubleshooting process and we determined that the flexing in the lead to the button had loosened a connection. Simple fix and another great support effort by Dave.
Jim
It is an amazing product.
I forgot to list the link to his website: https://tigcontrol.com/
The website is pretty basic as they are working on updating it.
BTW, I have been a reader of this forum for a long time, but never registered as I did not think I could contribute. However, discussing this product gave the reason to formally become a member of the group.
Jim
I forgot to list the link to his website: https://tigcontrol.com/
The website is pretty basic as they are working on updating it.
BTW, I have been a reader of this forum for a long time, but never registered as I did not think I could contribute. However, discussing this product gave the reason to formally become a member of the group.
Jim
- LtBadd
-
Weldmonger
-
Posts:
-
Joined:Sun Apr 12, 2015 4:00 pm
-
Location:Clearwater FL
-
Contact:
Welcome Jim, glad you decided to become a member, don't be afraid to post, even just to post photo's of what you're working on.beltguy wrote: BTW, I have been a reader of this forum for a long time, but never registered as I did not think I could contribute. However, discussing this product gave the reason to formally become a member of the group.
Jim
Richard
Website
Website
also http://www.6061.com/tigbutton.htmbeltguy wrote:It is an amazing product.
I forgot to list the link to his website: https://tigcontrol.com/
The website is pretty basic as they are working on updating it.
Jim
tweak it until it breaks
BillE.Dee
- BillE.Dee
-
Weldmonger
-
Posts:
-
Joined:Mon Nov 27, 2017 8:53 pm
-
Location:Pennsylvania (Northeast corner)
I'm glad that you brought up this posting about the tig button. I saw one somewhere, contacted Dave Vogel and he sent me one with the contingency that IF it doesn't work with the machines I have to call and we could make it work over the phone. It was a plug and play system. I had a problem with my hand and let it set for a while til I got fixed and I'm back using the tig button. I'm still amazed that it works without moving, simply on difference in finger pressure and not a lot of pressure either. It's like magic and just as sensitive as my wife.
BillE.Dee
- BillE.Dee
-
Weldmonger
-
Posts:
-
Joined:Mon Nov 27, 2017 8:53 pm
-
Location:Pennsylvania (Northeast corner)
Oscar, did you say that you already have a tig button for one of the other machines? Will that button work on the new machine or do you not want to move the button around from one to the other?
Sorry to dig this up again but I figured this might be the best way to possibly get some of older posters on here to come back and give their thoughts.
So I've been debating a button for a bit now but I'm curious, how have they held up long term for you guys? And what kind of shop do you use them in?
Thanks in advance
Sent from my Pixel 3a using Tapatalk
So I've been debating a button for a bit now but I'm curious, how have they held up long term for you guys? And what kind of shop do you use them in?
Thanks in advance
Sent from my Pixel 3a using Tapatalk
Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities