It is currently Thu Jun 29, 2017 3:26 am Advanced search

Its Gotta Be Blue II

Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process

Re: Its Gotta Be Blue II

Postby Poland308 » Tue Apr 18, 2017 7:08 pm

If I buy a set of them I won't have to keep the right size bit taped to the correct tap.
I have more questions than answers

Josh
Poland308
Weldmonger
 
Posts: 2011
Joined: Thu Sep 10, 2015 8:45 pm
Location: Iowa

Re: Its Gotta Be Blue II

Postby Coldman » Tue Apr 18, 2017 7:39 pm

OK here is an American equivalent site
http://www.natool.com/products/special- ... -drill-tap
Flat out like a lizard drinkin'
Coldman
Weldmonger
 
Posts: 1007
Joined: Mon Dec 15, 2014 2:16 am
Location: Oz

Re: Its Gotta Be Blue II

Postby Farmwelding » Tue Apr 18, 2017 8:14 pm

That's a nice assortment of parts you all have laying around. Must have a nice scrap and part pile around your place. At least parts that I would like to have.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Farmwelding
Weldmonger
 
Posts: 1173
Joined: Thu Mar 10, 2016 11:37 pm
Location: Wisconsin

Re: Its Gotta Be Blue II

Postby Coldman » Tue Apr 18, 2017 8:27 pm

Now you've gone and alerted the sticky beaks.
One day I'm gonna do a tidy up. Always seem to be too busy.


Sent using Tapatalk
Flat out like a lizard drinkin'
Coldman
Weldmonger
 
Posts: 1007
Joined: Mon Dec 15, 2014 2:16 am
Location: Oz

Re: Its Gotta Be Blue II

Postby MosquitoMoto » Wed Apr 19, 2017 8:15 am

Nice work as always Coldie.


K
User avatar
MosquitoMoto
Weldmonger
 
Posts: 1197
Joined: Sat Aug 01, 2015 8:38 am
Location: The Land Down Under

Re: Its Gotta Be Blue II

Postby Troy Boy 72 » Wed Apr 19, 2017 9:30 am

Well done mate !!!
Troy Boy 72
Active Member
 
Posts: 41
Joined: Thu Dec 31, 2015 7:22 pm
Location: Mackay North QLD

Re: Its Gotta Be Blue II

Postby Coldman » Wed Apr 19, 2017 5:36 pm

Thanks fellas. Hi mossie, haven't heard from you for a while, welcome back.


Sent using Tapatalk
Flat out like a lizard drinkin'
Coldman
Weldmonger
 
Posts: 1007
Joined: Mon Dec 15, 2014 2:16 am
Location: Oz

Re: Its Gotta Be Blue II

Postby Coldman » Thu May 04, 2017 9:44 pm

So I eventually scored some chequer plate drops and here is the finished beast.

CP20.jpg
CP20.jpg (106.95 KiB) Viewed 90 times


CP21.jpg
CP21.jpg (107.97 KiB) Viewed 90 times
Flat out like a lizard drinkin'
Coldman
Weldmonger
 
Posts: 1007
Joined: Mon Dec 15, 2014 2:16 am
Location: Oz

Re: Its Gotta Be Blue II

Postby Poland308 » Thu May 04, 2017 9:53 pm

I like that plate!
I have more questions than answers

Josh
Poland308
Weldmonger
 
Posts: 2011
Joined: Thu Sep 10, 2015 8:45 pm
Location: Iowa

Re: Its Gotta Be Blue II

Postby Otto Nobedder » Thu May 04, 2017 11:42 pm

Sweet! I'd certainly use checker plate if I had it. I think Jody has said, "There's no kill like overkill," and the guys on Mythbusters like to say, "Anything worth doing is worth overdoing."

Words for a welder to live by.

Steve
User avatar
Otto Nobedder
Weldmonger
 
Posts: 8330
Joined: Thu Jan 06, 2011 11:40 pm
Location: Near New Orleans

PreviousNext

Return to Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding