Welding Tips and Tricks

Hi guys im having trouble understanding how to set ac balance on my Kemppi 2300, basically the balance is set from 0 to -50 but i cant relate it back to settings which are used for say a miller which has percentages.

Furthermore, im trying to take someones advice and set my balance to 80% and they use a miller but i dont know how to relate that back to my machine. I did find this online but i cant get my head around it.... any ideas

80% balance mean 80% of the cycle is electrode negative or 20% cleaning action.

The Kemppi chart says at -50 you have 75% electrode negative, or 25% cleaning action, and that would be as close you can come to that Miller reference at 80%.