Pulse settings
Posted: Thu May 04, 2017 10:09 pm
I'm looking for a little guidance on some pulse settings .I just want to try it.I weld at work on either a Dynasty 350 or 200 .I do steel and aluminum .For aluminum I do mostly .060 .My settings are 1/16 tungston .2% lanthinated ,15 CFH ,5356 filler Rod .
Lots of times I have to close up 1/16 to 1/4 diameter holes .I want to do some outside corner joints on .060 aluminum.
How should I set the machine ?
Thanks
Lots of times I have to close up 1/16 to 1/4 diameter holes .I want to do some outside corner joints on .060 aluminum.
How should I set the machine ?
Thanks