1. Learn to tie your shoes.
2. Learn to cross the street.
3. Learn to take a joke.
I'm pretty liberal but all the PC stuff is just a distraction from reality. Less fun, too!
Arclight... the data in your link makes me like 4043 for its structural properties. I weld my own designs so strong gets me to sleep an hour sooner after hitting the pillow. I have enough to worry about.
Specifically higher tensile.
Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
Back on track here for a second,exnailpounder wrote:Good question I set my halo down at a party one night and never saw it again. Nowadays, young kids are sexting dirty pics to each other and screwing the teachers...and welders who have been participants in life are the new scourge....we need a "shaking my head" emoticon.PeteM wrote:Does barkeepers friend polish a halo?
Cause mine is a little tarnished. And dented. At the pawn shop.
Here is the cart I was talking about.
- Loaded up, lacking a couple of things.
- IMG_2118.JPG (49.22 KiB) Viewed 1586 times
- Side ciew
- IMG_2119.JPG (41.08 KiB) Viewed 1586 times
- Hinged out one way, does 360*
- IMG_2124.JPG (40.92 KiB) Viewed 1586 times
- Hinged the other way.
- IMG_2122.JPG (44.87 KiB) Viewed 1586 times
- Close up of hinge
- IMG_2123.JPG (32.59 KiB) Viewed 1586 times
- Hinge feature view
- IMG_2127.JPG (52.61 KiB) Viewed 1586 times
- With the bag.
- IMG_2128.JPG (55.57 KiB) Viewed 1586 times
if there's a welder, there's a way
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Very nice! Nice enough to get the topic back on the rails, at least to the next depot.
Well thought out, and well organized.
Who makes the li'l vacuum pump? It looks like an Edwards, but I can't tell at that size and resolution.
Steve
Well thought out, and well organized.
Who makes the li'l vacuum pump? It looks like an Edwards, but I can't tell at that size and resolution.
Steve
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Yeah, the sexual references show the hidden 12 year-old in all of us, and it's a place we don't really need to go, unless the joke is truly flawless and not utterly tasteless. I'll confess to a bit of that on the thread derail of our new "Mick" from OZ, where it descended into strange town names.MinnesotaDave wrote:
Strictly person opinion, I find the sexual innuendo derails to be ridiculous.
Members bragging about "teaching" this stuff to young people is even worse.
I'm not saying I've always shown perfect judgement online, I'm human so clearly I haven't.
Braggarts don't last long here, from what I've seen.
I think part of why I mentioned it at all is to remind myself to be careful. I'm supposed to be part of the example, not the problem.
Steve
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Nice work Olivero! Nice vacuum pump...whadda ya use that for It's vodka and lemonade today if anyone was wondering.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
Is there a schedule or do you have a wheel you spin like a game show?exnailpounder wrote:Nice work Olivero! Nice vacuum pump...whadda ya use that for It's vodka and lemonade today if anyone was wondering.
As for that pump cart-wow I don't know what I'd do with that but I've gotta have it because who doesn't need more cool tools they don't need-but I'm sure you need them.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
Haha, thanks.
The vacuum pump is a JB industries.
It was a cool little project, I got tired of rolling it around on a magliner and dropping shit off it, vacuum pump and recovery unit is considered holy in my book, no bumping or damaging it, they develop a leak, your screwed, so I figured this was the best way.
ITs funny how when you first start out fabbing, you gotta have a drawing, this I built without any drawing, just going off in my mind, piecing it together.
The vacuum pump is a JB industries.
It was a cool little project, I got tired of rolling it around on a magliner and dropping shit off it, vacuum pump and recovery unit is considered holy in my book, no bumping or damaging it, they develop a leak, your screwed, so I figured this was the best way.
ITs funny how when you first start out fabbing, you gotta have a drawing, this I built without any drawing, just going off in my mind, piecing it together.
if there's a welder, there's a way
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Nah...I just look at whatever I have in the fridge and decide what to drink that day.Farmwelding wrote:Is there a schedule or do you have a wheel you spin like a game show?exnailpounder wrote:Nice work Olivero! Nice vacuum pump...whadda ya use that for It's vodka and lemonade today if anyone was wondering.
As for that pump cart-wow I don't know what I'd do with that but I've gotta have it because who doesn't need more cool tools they don't need-but I'm sure you need them.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
"ITs funny how when you first start out fabbing, you gotta have a drawing, this I built without any drawing, just going off in my mind, piecing it together.
if there's a welder, there's a way"
Oliver
every time i do a build without some decent drawing it seems
like a cut and re-weld to often.
that is a beautiful project.
craig
if there's a welder, there's a way"
Oliver
every time i do a build without some decent drawing it seems
like a cut and re-weld to often.
that is a beautiful project.
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Man, this thread is making me want to use my 4943 to build something! Hopefully I will soon, vacation time is just around the corner. I can finally use the 30lbs of 4943 that I have bunker'ed away. I still have some 4043, so I'll have to use that up inthe process, seeing as how 4943 is literally the same price.
I run into the same problem very often, this one somehow just pieced together without a problem.motox wrote:"ITs funny how when you first start out fabbing, you gotta have a drawing, this I built without any drawing, just going off in my mind, piecing it together.
if there's a welder, there's a way"
Oliver
every time i do a build without some decent drawing it seems
like a cut and re-weld to often.
that is a beautiful project.
craig
Thank you, figured it was time to build something for myself for once
if there's a welder, there's a way
Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities