Lots better than last week. Beads are pretty straight. Watched the arc close and practiced pedal control. Got cheaters for the helmet, so I could see a little better. Cleaned the material better.
Sent from my iPhone using Tapatalk
Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
Was able to keep more of a straight line, and more even bead width and penetration. Tried running a couple with pulse too. I ordered a stubby gas lens kit on eBay. Hopefully that will make the 26 torch a little more manageable! The TIG Finger is an absolute must, makes hand comfort so much better. I was having trouble with heat escaping from under the plate I was welding on and impinging on my wrist of my torch hand. Ended up using another plate on top of the one I was welding to deflect that.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
David
Everlast 210 EXT
Lincoln AC225
Lotos LTP5000D
Oxy-Acetylene
Everlast 210 EXT
Lincoln AC225
Lotos LTP5000D
Oxy-Acetylene
Don't be afraid to dunk that sucker in a bucket of water every few beads. It'll help keep the temperature manageable whilst you're maximising your seat time. There are some decent looking beads there David so stick with it. What you're doing is building in muscle memory and as with very new skill if you don't use it you lose it.
My Granddad was a professional bass player in jazz bands back in the 50's and 60's and he used to say to me "Adam, if I don't play her for a day, she leaves me for a week. If I don't play her for a week, she leaves me for a month. If I don't play her for a month, she leaves me for a year!" So true.
Flo
My Granddad was a professional bass player in jazz bands back in the 50's and 60's and he used to say to me "Adam, if I don't play her for a day, she leaves me for a week. If I don't play her for a week, she leaves me for a month. If I don't play her for a month, she leaves me for a year!" So true.
Flo
It does look heaps better! Another trick you can try, use an awl and scribe straight lines parallel to each other and weld between them. Set their width to your preferred bead size. This artificial edge will help you maintain your straight line control and offer you further help while welding to size and control your bead.
I wish my wife was a jazz bass....OzFlo wrote: My Granddad was a professional bass player in jazz bands back in the 50's and 60's and he used to say to me "Adam, if I don't play her for a day, she leaves me for a week. If I don't play her for a week, she leaves me for a month. If I don't play her for a month, she leaves me for a year!" So true.
Got a couple hours practice in today. Nothing noteworthy other than dipping the tungsten a lot today! Just need more hood time!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
David
Everlast 210 EXT
Lincoln AC225
Lotos LTP5000D
Oxy-Acetylene
Everlast 210 EXT
Lincoln AC225
Lotos LTP5000D
Oxy-Acetylene
Return to “Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities