Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
User avatar
  • Posts:
  • Joined:
    Sat Aug 01, 2015 8:38 am
  • Location:
    The Land Down Under

Great stuff Steve!



Moz
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Thanks, guys! I have one procedure and test left... One vessel in the queue is aluminum, so I have to qualify separately, and qualify a separate procedure.

Steve
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

Good luck on the last one, Steve! Congrats so far!
  • Posts:
  • Joined:
    Sun Jan 15, 2017 1:08 am

Last month or so I have ore pics of each if anyone wants moreImageImageImageImageImageImageImageImageImage

Sent from my SM-G920V using Tapatalk
  • Posts:
  • Joined:
    Sun Jan 15, 2017 1:08 am

ContinuedImageImageImageImageImageImageImageImageImage

Sent from my SM-G920V using Tapatalk
OzFlo
  • Posts:
  • Joined:
    Sat Sep 26, 2015 10:16 pm
  • Location:
    Sydney, Australia

Nice work 5th Street! Very nice..
User avatar
  • Posts:
  • Joined:
    Sat Aug 01, 2015 8:38 am
  • Location:
    The Land Down Under

Good grief...inspiring work.


K
User avatar
  • Posts:
  • Joined:
    Mon Feb 09, 2015 4:48 pm
  • Location:
    St. Johns, Michigan

Looks awesome 5th :)
Pete



Esab SVI 300, Mig 4HD wire feeder, 30A spool gun, Miller Passport, Dynasty 300 DX, Coolmate 4, Spectrum 2050, C&K Cold Wire feeder WF-3, Black Gold Tungsten Sharperner, Prime Weld 225
Bingo
  • Posts:
  • Joined:
    Mon Jul 03, 2017 11:03 pm
  • Location:
    FLA

Some p91 field weld OD prep for phaser ray this is a power house main steam line. The system runs at 1950 degrees at 2400 psi. The weld shot good time for drinks!
Attachments
IMG_2404.JPG
IMG_2404.JPG (55.37 KiB) Viewed 2480 times
User avatar
  • Posts:
  • Joined:
    Tue Aug 15, 2017 3:25 pm

5th Street Fab wrote:Last month or so I have ore pics of each if anyone wants moreImageImageImageImageImageImageImageImageImage

Sent from my SM-G920V using Tapatalk
this looks sick, what kind of machine you use?


Sent from my iPhone using Tapatalk
  • Posts:
  • Joined:
    Sun Jan 15, 2017 1:08 am

Onenastycummins wrote:
5th Street Fab wrote:Last month or so I have ore pics of each if anyone wants moreImageImageImageImageImageImageImageImageImage

Sent from my SM-G920V using Tapatalk
this looks sick, what kind of machine you use?


Sent from my iPhone using Tapatalk
Thanks everyone.

I run syncrowave 250dx's

Sent from my SM-G920V using Tapatalk
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

5th st
what do you use to cutout the aluminum parts?
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
  • Posts:
  • Joined:
    Sun Jan 15, 2017 1:08 am

motox wrote:5th st
what do you use to cutout the aluminum parts?
craig
We have a router table for the main parts. Then we just use a shear or band saw for everything else.


Sent from my SM-G920V using Tapatalk
GreinTime
  • Posts:
  • Joined:
    Fri Nov 01, 2013 11:20 am
  • Location:
    Pittsburgh, PA

Some 9th Gen Civic Turbo manifolds getting done after hours. ImageImage

Sent from my VS995 using Tapatalk
#oneleggedproblems
-=Sam=-
dirtmidget33
  • Posts:
  • Joined:
    Tue May 13, 2014 5:22 pm

I haven't been around much lately due to some health reasons havent done any welding. Only did one project in months and it was my daughters new launch pad. Amazing how out of practice I was, felt like a beginner again and was shaky as hell. I got it done except blast deflector we designed not made yet. I'm not happy with my welding looks like crap but she likes it and its works.
0716171139a_HDR.jpg
0716171139a_HDR.jpg (71.41 KiB) Viewed 2982 times
0713171451_HDR.jpg
0713171451_HDR.jpg (69.64 KiB) Viewed 2982 times
0801171753b_HDR.jpg
0801171753b_HDR.jpg (47.28 KiB) Viewed 2982 times
why use standard nozzles after gas lens where invented. Kinda of like starting fires by rubbing sticks together.
User avatar
  • Posts:
  • Joined:
    Sat Mar 30, 2013 11:49 am
  • Location:
    Sweden

Good to see you back again midget

Looks like a nice project, I like anything that will include smoke, fire and the possibility to explode

Fire mission danger close :mrgreen:
dirtmidget33
  • Posts:
  • Joined:
    Tue May 13, 2014 5:22 pm

Thanks Andersk, it has been too long. There is a lot to catch up on.
Since you like things that explode you might like this one. Has nothing to do with welding though. These are some six inch shells from a New Years shoot.
FB_IMG_1504326930445-1.jpg
FB_IMG_1504326930445-1.jpg (44.52 KiB) Viewed 2836 times
why use standard nozzles after gas lens where invented. Kinda of like starting fires by rubbing sticks together.
User avatar
  • Posts:
  • Joined:
    Sat Mar 30, 2013 11:49 am
  • Location:
    Sweden

Hell yeah :twisted:
Looks more like the powder charges they used on
pirate ship cannons. :mrgreen:
GreinTime
  • Posts:
  • Joined:
    Fri Nov 01, 2013 11:20 am
  • Location:
    Pittsburgh, PA

Riding the gravy train on a Saturday night! 3/32 tungsten, #8 cup w/gas lens since I couldn't make it happen with a straight collet and #6 cup, and 4943 filler. Roughly 1-1.25rpm on the positioner with the welder set at 175, probably only using 100-125 as it gets to the end of the weld. ImageImage

Sent from my VS995 using Tapatalk
#oneleggedproblems
-=Sam=-
User avatar

looks real good Sam, are you just tacking and welding or doing the cutting of the pipe also?
Richard
Website
GreinTime
  • Posts:
  • Joined:
    Fri Nov 01, 2013 11:20 am
  • Location:
    Pittsburgh, PA

LtBadd wrote:looks real good Sam, are you just tacking and welding or doing the cutting of the pipe also?
I cut the tubes on a lathe and then used a miter gage on a belt sander to sand the angle. This was all done before I left on Friday, I just took everything home to weld it.

Sent from my VS995 using Tapatalk
#oneleggedproblems
-=Sam=-
mpete53
  • Posts:
  • Joined:
    Sun Mar 06, 2016 11:33 am
  • Location:
    New York

I love seeing all the great looking weld posted here. Myself, I wanted to learn tig welding to do small fabrication and repair of stainless steel parts for boats. Today I was able to help a friend by welding a mount back onto a porthole frame. Not a lot of welding just 4 tacks from 16 gauge to .025. While it was not the best looking weld it made him smile.

also 2 other small boat projects
Attachments
arm to prevent rotation of radar mast
arm to prevent rotation of radar mast
IMG_1225.JPG (43.58 KiB) Viewed 2755 times
tie down point added to 5/16 washer
tie down point added to 5/16 washer
IMG_1479.JPG (42.6 KiB) Viewed 2755 times
porthole repair
porthole repair
IMG_2113.JPG (56.61 KiB) Viewed 2755 times
  • Posts:
  • Joined:
    Sun Jan 15, 2017 1:08 am

This last month or soImageImageImageImageImageImageImageImageImage

Sent from my SM-G920V using Tapatalk
  • Posts:
  • Joined:
    Sun Jan 15, 2017 1:08 am

Some moreImageImageImageImageImageImageImageImageImage

Sent from my SM-G920V using Tapatalk
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

5th St.,
not only do you do outstanding welds but your shop fabs the neatest
projects!!
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Post Reply