Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process
Rick_H
  • Posts:
  • Joined:
    Sat Feb 08, 2014 1:50 pm
  • Location:
    PA/MD

Finished up another, replaced the bottom and all support round bar, straightened outer ring and welded it all back in.
Attachments
IMG_20170304_202953708_HDR.jpg
IMG_20170304_202953708_HDR.jpg (42.36 KiB) Viewed 1596 times
IMG_20170304_201342934.jpg
IMG_20170304_201342934.jpg (19.91 KiB) Viewed 1596 times
IMG_20170304_171834358.jpg
IMG_20170304_171834358.jpg (59.84 KiB) Viewed 1596 times
IMG_20170304_152128776_HDR.jpg
IMG_20170304_152128776_HDR.jpg (74.79 KiB) Viewed 1596 times
IMG_20170304_171824941.jpg
IMG_20170304_171824941.jpg (106.88 KiB) Viewed 1596 times
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
exnailpounder
  • Posts:
  • Joined:
    Thu Dec 25, 2014 9:25 am
  • Location:
    near Chicago

Great work...as usual! Miss you being around.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
bruce991
  • Posts:
  • Joined:
    Tue Jan 05, 2016 10:31 pm
  • Location:
    Central Michigan

AndersK wrote:Sweet !

Like the parallel blocks, been thinking about getting a couple myself.
My apprentice days in machine shop had to make jo blocks, 1,2,3 blocks, angle blocks and parallels, all from scratch entailed precision grinding and heat treat and use them to this day. Very good skill to learn. There was times when trigonometry was used and enjoyed the challenges.
Last edited by bruce991 on Sun Mar 05, 2017 10:29 am, edited 1 time in total.
bruce991
  • Posts:
  • Joined:
    Tue Jan 05, 2016 10:31 pm
  • Location:
    Central Michigan

Otto Nobedder wrote:
exnailpounder wrote:
Poland308 wrote:Oil soaked metal is the worst. I've done some SS tanks that were used for oil/ammonia/fly ash/ ??? Mix. It boiled out as you welded. You had to weld everything 4x to get one good weld.
I had to weld a broken piece from a meat slicer , the part that deflects the meat onto the receiving tray, and it was aluminum and it smelled exactly like fried hamburgers as I was welding it. Even cooking grease penetrates metal and causes nightmares.
On that note, imagine the smell if you welded the impellor on a sewage pump... Hamburgers is not my first guess.


Steve S
How about climbing into a clarifier in a waste water plant and working/welding. My last job as part of the companies obligation to the small town they ran the waste water plant.
nelson
  • Posts:
  • Joined:
    Sun Jul 17, 2016 1:21 pm
  • Location:
    near philly

I'll put up a pic maybe, but I just want to thank Jody for the vids. I had to pop a 2 1/2 inch pipe plug off our air receiver today. A 3 foot wrench didn't work even with a 5 lb. hammer. Thanks to having Jody''s stuff in mind I just took a 2 x 1/4 inch piece of 302 ss and welded it on the side of the wrench with 309 rod. 8 feet long and me putting full weight on the end...maybe 1600 ft-lb on the plug...all on a ladder... did the trick.

Thing is, what are pipe wrenches made of? Wrought steel, right? I was worried about cracking but all went well... I was saying jeez... is this cast iron? Welded nice but the wrench metal glowed kinda bright near the puddle. Never saw that before.
Stone knives and bearskins.....and a NEW EVERLAST 164SI !!!
That's my newly shared work welder.
At home I got a Power Tig 185 DV. Nice, but no plasma cutting... Nice tight arc after a second.
Poland308
  • Posts:
  • Joined:
    Thu Sep 10, 2015 8:45 pm
  • Location:
    Iowa

Sure there's some sort of cast steel but not cast iron they bend before they break.
I have more questions than answers

Josh
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

Would heating said plug and then waiting for it to cool help? or would that have the opposite effect?

Mick
User avatar
  • Posts:
  • Joined:
    Mon Nov 04, 2013 7:51 am
  • Location:
    The Netherlands

nelson wrote:Thing is, what are pipe wrenches made of? Wrought steel, right?
Usually tools like these are a wrought/forged steel.

They can often be made from a heat-treatable steel so they can be tempered to make a very, very tough material. Sometimes sprinkle in some extra alloys like chrome and vanadium.

Hardness of the material is often clear from the fact that when they do fail (often spectacularly! ;) ) they tend to snap/break and not bend.

Bye, Arno.
User avatar
  • Posts:
  • Joined:
    Fri May 27, 2016 11:00 am
  • Location:
    Atlanta, GA

There was no way to get comfortable on this one so i had a couple of voids on the inside. I lost one of my tig fingers which i needed for the feed wire. So much for a pretty weld.
Hydraulic cylinder end cap, TIG @160 amps. Off to be machined now.
Attachments
20170307_112217.jpg
20170307_112217.jpg (32.12 KiB) Viewed 1414 times
20170307_112227.jpg
20170307_112227.jpg (34.77 KiB) Viewed 1414 times
Raymond
Everlast PowerTIG 255EXT
nelson
  • Posts:
  • Joined:
    Sun Jul 17, 2016 1:21 pm
  • Location:
    near philly

Here's that goof ass pipe wrench. The 1/4 x 1 1/2 stock draws a magnet so i, as usual, have no clue. But the job's done.
Attachments
20170307_122607.jpg
20170307_122607.jpg (34.52 KiB) Viewed 1403 times
Stone knives and bearskins.....and a NEW EVERLAST 164SI !!!
That's my newly shared work welder.
At home I got a Power Tig 185 DV. Nice, but no plasma cutting... Nice tight arc after a second.
nelson
  • Posts:
  • Joined:
    Sun Jul 17, 2016 1:21 pm
  • Location:
    near philly

And here's what I welded today. Pretty huh?

The owner of the company collects 57 t.birds. If he'd had to drive to make money I'm sure he'd choose something a few decades newer.
This is a pic of a 16 ton press footpedal. The trip isn't adjustable but the brake kept creeping back on. (It runs continuous.. not single stroke) I just grabbed my fucks core and slapped a 1/4 rod to persuade it to play nice. Welding .
Some people don't get what nickel and diming really costs. People like us enable their ignorance by keeping shit running.
Attachments
20170307_140819.jpg
20170307_140819.jpg (43.79 KiB) Viewed 1600 times
Stone knives and bearskins.....and a NEW EVERLAST 164SI !!!
That's my newly shared work welder.
At home I got a Power Tig 185 DV. Nice, but no plasma cutting... Nice tight arc after a second.
bruce991
  • Posts:
  • Joined:
    Tue Jan 05, 2016 10:31 pm
  • Location:
    Central Michigan

Decided to see if these rocket stoves are all they are supposed to be, will try soon, only had 1/8 inch 3 x 4 next one will be 14 ga. 4 x 4 made with intention of carrying in a bucket with a bunch of kindling and lid on top, I will be everyone's best friend on a wet morning and coffee is not ready.
Attachments
Rocket stove in bucket.JPG
Rocket stove in bucket.JPG (53.71 KiB) Viewed 1580 times
Me holding rocket stove.JPG
Me holding rocket stove.JPG (60.96 KiB) Viewed 1580 times
Rocket stove project top view.JPG
Rocket stove project top view.JPG (68.45 KiB) Viewed 1580 times
exnailpounder
  • Posts:
  • Joined:
    Thu Dec 25, 2014 9:25 am
  • Location:
    near Chicago

I built a rocket stove. They are cool for 15 minutes and then....I gave mine to my best friend to take to his campsite. He amazes the neighbors by cooking sweet corn on it. He's having fun with it so it was worth it to build for him. If I still had it, it would have been cannibalized into something else by now.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
Farmwelding
  • Posts:
  • Joined:
    Thu Mar 10, 2016 11:37 pm
  • Location:
    Wisconsin

Just started building one myself today. Got bored so I figured I'd make one at school. Of course I'm too cheap so it is gonna be angle and flat stock since I am not going to go and buy tubing. Should be interesting.
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
  • Posts:
  • Joined:
    Sun Jan 15, 2017 1:08 am

Some pics from the last week or 2
ImageImageImageImageImageImage

Sent from my SM-G920V using Tapatalk
sedanman
  • Posts:
  • Joined:
    Sun Jan 03, 2016 2:54 pm
  • Location:
    Beacon and Pawling, New York

5th Street fab, please refrain from posting your work. You are destroying my self esteem. Lol
bruce991
  • Posts:
  • Joined:
    Tue Jan 05, 2016 10:31 pm
  • Location:
    Central Michigan

exnailpounder wrote:I built a rocket stove. They are cool for 15 minutes and then....I gave mine to my best friend to take to his campsite. He amazes the neighbors by cooking sweet corn on it. He's having fun with it so it was worth it to build for him. If I still had it, it would have been cannibalized into something else by now.
Apparently you are not a camper like I am, this will allow me to make breakfast and use my pocket iso/butane stove for my coffee, while camping, then can leave camp to ride the dirt bike w/o having to snuff out a campfire in a burn ring beforehand. Probably get several hours use out of it.
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

exnailpounder wrote:I built a rocket stove. They are cool for 15 minutes and then....I gave mine to my best friend to take to his campsite. He amazes the neighbors by cooking sweet corn on it. He's having fun with it so it was worth it to build for him. If I still had it, it would have been cannibalized into something else by now.
If you could make a rocket stove chill a can of froths, then you'd be in business.
wasted welder
  • Posts:
  • Joined:
    Wed Mar 08, 2017 2:25 am
  • Location:
    poulsbo wa

thumbnail_IMG_20170307_172642.jpg
thumbnail_IMG_20170307_172642.jpg (43.33 KiB) Viewed 1711 times
thumbnail_0307171700.jpg
thumbnail_0307171700.jpg (59.49 KiB) Viewed 1711 times
thumbnail_IMG_20170221_150305.jpg
thumbnail_IMG_20170221_150305.jpg (26.13 KiB) Viewed 1711 times
thumbnail_IMG_20170224_173922.jpg
thumbnail_IMG_20170224_173922.jpg (56.63 KiB) Viewed 1711 times
thumbnail_IMG_20170302_090330.jpg
thumbnail_IMG_20170302_090330.jpg (104.05 KiB) Viewed 1711 times
thumbnail_IMG_20170307_142724.jpg
thumbnail_IMG_20170307_142724.jpg (71.14 KiB) Viewed 1711 times
thumbnail_0307171525.jpg
thumbnail_0307171525.jpg (46.13 KiB) Viewed 1711 times
thumbnail_0307171125.jpg
thumbnail_0307171125.jpg (49.52 KiB) Viewed 1711 times
some things i made for my shop and some stuff i have made for some customers the past 2 weeks.
Coldman
  • Posts:
  • Joined:
    Mon Dec 15, 2014 2:16 am
  • Location:
    Oz

You do beautiful work


Sent using Tapatalk
Flat out like a lizard drinkin'
GreinTime
  • Posts:
  • Joined:
    Fri Nov 01, 2013 11:20 am
  • Location:
    Pittsburgh, PA

Image

Some 2x.250 wall Mild steel control arms I'm welding for a buddy of mine. You boys that weld pipe have my respect, that thick stuff is no joke!

Sent from my VS995 using Tapatalk
#oneleggedproblems
-=Sam=-
Rick_H
  • Posts:
  • Joined:
    Sat Feb 08, 2014 1:50 pm
  • Location:
    PA/MD

GreinTime wrote:Image

Some 2x.250 wall Mild steel control arms I'm welding for a buddy of mine. You boys that weld pipe have my respect, that thick stuff is no joke!

Sent from my VS995 using Tapatalk
Yeah, buts it's nice to crank up the heat and burn it
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
  • Posts:
  • Joined:
    Sun Jan 15, 2017 1:08 am

Some stuff from the last 2 weeks.
Image
ImageImageImageImageImageImageImageImageImageImageImage

Sent from my SM-G920V using Tapatalk
Last edited by 5th Street Fab on Sat Mar 25, 2017 12:17 am, edited 1 time in total.
  • Posts:
  • Joined:
    Sun Jan 15, 2017 1:08 am

Deleted
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 6:44 am

Beautiful stuff!
Post Reply