Adam's Got Skills
- Adam's Got Skills
-
Guide
-
Posts:
-
Joined:Sun Aug 10, 2014 3:32 pm
I've done a little back purge before...I know how to hook it up...but when I worked for a former employer they had a box with holes in the top. We had em in all shapes an sizes. I saw one of Jody's videos talking about em....but not how to build one. I was hoping someone might have a pic an some easy instruction on how to build one. I think i just need a sm all one maybe 2x4" or maybe 3"x4"...any ideas on materials and diffuse material and all that....Id really appreciate some help on this!!! Thanks for any ideas
- TRACKRANGER
-
Weldmonger
-
Posts:
-
Joined:Wed Aug 06, 2014 12:48 am
-
Location:Melbourne, Australia
Should be pretty easy to put together.Adam's Got Skills wrote:I've done a little back purge before...I know how to hook it up...but when I worked for a former employer they had a box with holes in the top. We had em in all shapes an sizes. I saw one of Jody's videos talking about em....but not how to build one. I was hoping someone might have a pic an some easy instruction on how to build one. I think i just need a sm all one maybe 2x4" or maybe 3"x4"...any ideas on materials and diffuse material and all that....Id really appreciate some help on this!!! Thanks for any ideas
There are some images for back purge boxes etc here: https://www.google.com.au/search?q=argo ... 3&bih=1032
and also in links on this web page here: http://www.millerwelds.com/resources/co ... lock-ideas
EWM Phonenix 355 Pulse MIG set mainly for Aluminum, CIGWeld 300Amp AC/DC TIG, TRANSMIG S3C 300 Amp MIG, etc, etc