It is currently Wed Sep 20, 2017 4:17 pm Advanced search

Help, need feed back on a HTP invertig 221 tig welder

Tig welding tips, questions, equipment, applications, instructions, techniques, tig welding machines, troubleshooting tig welding process

Help, need feed back on a HTP invertig 221 tig welder

Postby 1hawnfisherman » Wed Oct 07, 2015 9:42 pm

Hi i'm new to this forum, but been doing some research on inverter welders and want to upgrade my Lincoln square wave 175.I was looking into a HTP invertig 221, want to know what's everyones feedback, can't afford a miller right now. Has anyone had problem's with their 221?
1hawnfisherman
New Member
 
Posts: 4
Joined: Wed Oct 07, 2015 1:46 pm

Re: Help, need feed back on a HTP invertig 221 tig welder

Postby Otto Nobedder » Thu Oct 08, 2015 5:41 pm

Welcome aboard!

This section is actually for members to make suggestions and give feedback to the forum. I suppose that's not made too clear.

No worries. I will move your topic into the TIG-specific section. Several members have experience with your machine.

Steve S
User avatar
Otto Nobedder
Weldmonger
 
Posts: 8383
Joined: Thu Jan 06, 2011 11:40 pm
Location: Near New Orleans

Re: Help, need feed back on a HTP invertig 221 tig welder

Postby AKweldshop » Thu Oct 08, 2015 5:44 pm

1hawnfisherman wrote:Has anyone had problem's with their 221?


You can search the internet from one end to the other, and you won't find any complaints about HTP (USAweld.com) or their products.

Good quality and legendary service.
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
AKweldshop
Weldmonger
 
Posts: 3078
Joined: Wed Oct 23, 2013 3:30 pm
Location: Palmer AK

Re: Help, need feed back on a HTP invertig 221 tig welder

Postby 1hawnfisherman » Thu Oct 08, 2015 6:28 pm

Otto Nobedder wrote:Welcome aboard!

This section is actually for members to make suggestions and give feedback to the forum. I suppose that's not made too clear.

No worries. I will move your topic into the TIG-specific section. Several members have experience with your machine.

Steve S


Thanks Steve
1hawnfisherman
New Member
 
Posts: 4
Joined: Wed Oct 07, 2015 1:46 pm

Re: Help, need feed back on a HTP invertig 221 tig welder

Postby rahtreelimbs » Thu Oct 08, 2015 7:25 pm

I have had the 221 for close to 4 years now. Very very excellent machine and the best customer service. Around Thanksgiving they run a pretty good sale!
rahtreelimbs
Ace
 
Posts: 382
Joined: Mon Jun 14, 2010 10:39 pm

Re: Help, need feed back on a HTP invertig 221 tig welder

Postby Oscar » Thu Oct 08, 2015 9:09 pm

had mine since Dec '13. No issues what so ever.
HTP Invertig 221 DV w/ Arctic Chill cooler DV.
Millermatic 211 Inverter w/ Spoolmate-150
Eastwood Versacut 40A Plasma cutter
User avatar
Oscar
Weldmonger
 
Posts: 1290
Joined: Thu Dec 26, 2013 12:41 am
Location: Laredo, Tx

Re: Help, need feed back on a HTP invertig 221 tig welder

Postby 1hawnfisherman » Fri Oct 09, 2015 12:52 am

Thanks for the feedback everyone :D
1hawnfisherman
New Member
 
Posts: 4
Joined: Wed Oct 07, 2015 1:46 pm

Re: Help, need feed back on a HTP invertig 221 tig welder

Postby motox » Fri Oct 09, 2015 5:59 am

i too have one and like it. it does more than the miller 250 syncrowave i have
with less energy use.
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
motox
Weldmonger
 
Posts: 1289
Joined: Thu Nov 28, 2013 12:49 pm
Location: Milford Delaware

Re: Help, need feed back on a HTP invertig 221 tig welder

Postby Oscar » Fri Oct 09, 2015 7:26 am

You better get on the order list now because they will run out for the Black Friday sale.
HTP Invertig 221 DV w/ Arctic Chill cooler DV.
Millermatic 211 Inverter w/ Spoolmate-150
Eastwood Versacut 40A Plasma cutter
User avatar
Oscar
Weldmonger
 
Posts: 1290
Joined: Thu Dec 26, 2013 12:41 am
Location: Laredo, Tx

Re: Help, need feed back on a HTP invertig 221 tig welder

Postby Poland308 » Fri Oct 09, 2015 2:11 pm

I'd never heard of HTP machines before. Just checked out there site and my interest is in the mig set ups. Are some of you also using them?
I have more questions than answers

Josh
Poland308
Weldmonger
 
Posts: 2172
Joined: Thu Sep 10, 2015 8:45 pm
Location: Iowa

Next

Return to Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding