Page 1 of 1
.025 flux cored wire?
Posted: Mon Jan 17, 2011 4:39 am
by lazer
sorry if this has been asked but i was looking for .025 flux core, thanks.
i am outside in the wind all the time fixing a truck, thanks again.
Re: .025 flux cored wire?
Posted: Mon Jan 17, 2011 9:30 am
by jpence38
What exactly are you trying to weld with .025 flux-core? I am assuming you are wanting an innershield wire. I have never seen an .025 innershield wire. Lincoln has an .030 NR-211-MP. It comes on a 1lb. plastic spool. part # ED031448
Re: .025 flux cored wire?
Posted: Mon Jan 17, 2011 4:30 pm
by lazer
oh yeah hey on a 90amp HF special, i know i know but I would like to hear some discussion by people who do use these units and not boo hoo.
thanks im trying to do floor pans and then that leads to a rollbar, but the .025 was to tack body panels, ive never welded before so face mask down, fire away.
anyways thanks.
Re: .025 flux cored wire?
Posted: Mon Jan 17, 2011 6:51 pm
by anthonyfawley
I agree with Jim...i believe Home Depot may even have the flux core
Re: .025 flux cored wire?
Posted: Tue Jan 18, 2011 2:03 am
by lazer
ok yeah they do,
so far i have not found .025 fluxwire without looking too hard i have heard that the smaller wire burns hotter? i am new to this obviously so thanks so much.
so no .025 flux core cause its too small and would be too breakable to make, is what i gather, now will larger wire burn less hot equal less burn through?
anyway i wont ask 21 questions so
how about working outside below freezing? anything i should know besides no snow?
Re: .025 flux cored wire?
Posted: Wed Jan 19, 2011 12:30 am
by 4m welder
try to be dry....ouch is all i'm gonna say